Arduino build error

[umeshwalkar]

Hi, I am unable to compile. i have followed steps to install Arduino-Quectel-M66. following error received.

"C:\Users\Umesh\AppData\Local\Arduino15\packages\WizIO\tools\m66_tools\1.0/GFH_Generator.exe" "C:\Users\Umesh\AppData\Local\Temp\arduino_build_438519/ARDUINO.bin" cannot open the file C:\Program Files (x86)\Arduino\temp.bin!

Using library Ethernet at version 1.0.0 in folder: C:\Users\Umesh\AppData\Local\Arduino15\packages\WizIO\hardware\m66\2.0.0\libraries\Ethernet exit status -1 Error compiling for board Quectel M66 Module

So, I assigned admin right to 'GFH_Generator.exe" in "C:\Users\Umesh\AppData\Local\Arduino15\packages\WizIO\tools\m66_tools\1.0" folder.

then I receiving following error.

"C:\Users\Umesh\AppData\Local\Arduino15\packages\WizIO\tools\m66_gcc\1.70201.0\bin\arm-none-eabi-objcopy" -O binary "C:\Users\Umesh\AppData\Local\Temp\arduino_build_438519/tcp_http.ino.dat" "C:\Users\Umesh\AppData\Local\Temp\arduino_build_438519/ARDUINO.bin" "C:\Users\Umesh\AppData\Local\Arduino15\packages\WizIO\tools\m66_tools\1.0/GFH_Generator.exe" "C:\Users\Umesh\AppData\Local\Temp\arduino_build_438519/ARDUINO.bin" Using library Ethernet at version 1.0.0 in folder: C:\Users\Umesh\AppData\Local\Arduino15\packages\WizIO\hardware\m66\2.0.0\libraries\Ethernet fork/exec C:\Users\Umesh\AppData\Local\Arduino15\packages\WizIO\tools\m66_tools\1.0/GFH_Generator.exe: The requested operation requires elevation. Error compiling for board Quectel M66 Module.

Windows 10, 64 bit. Arduino IDE 1.8.9

[Wiz-IO]

Hi Arduino & Admin rights

[umeshwalkar]

Thanks,

running Arduino as administrator compiles program. received [ UPLOAD ] USE QFlash Tool so, for programming i used QFlash.exe and files from "C:\Users\Umesh\AppData\Local\Temp\arduino_build_695874" Is this right procedure??

[Wiz-IO]

yes, get bin & ini from project build folder

[umeshwalkar]

able to program. thanks.

I have one more query regarding platform-quectel I am using arduino framework using platform-io. able to compile code but uploading is terminated in 3rd step.

<<<<<<<<<<<< QUECTEL M66 MODULE 2018 Georgi Angelov >>>>>>>>>>>> CONFIGURATION: https://docs.platformio.org/page/boards/quectel/m66.html PLATFORM: Quectel 2.1.01 #1b8c472 > Quectel M66 module HARDWARE: ARM, MT6261 260MHz, 100KB RAM, 360KB Flash DEBUG: Current (uart) On-board (uart) PACKAGES:

• framework-quectel c17af04
• tool-quectel b65e42d
• toolchain-gccarmnoneeabi 1.70201.0 (7.2.1) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 6 compatible libraries Scanning dependencies... No dependencies Building in release mode ADD HEADER Checking size .pio\build\m66\program.elf BIN SIZE: 21.625 kB Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 9.1% (used 9332 bytes from 102400 bytes) Flash: [ ] 0.1% (used 208 bytes from 368640 bytes) Configuring upload protocol... Looking for upload port... Use manually specified: COM4 Uploading: program <.........................> DONE Initialising <....... ...................................................................................> DONE Sending MTK Download Agent. Please wait <..................................................................................................................> DONE

*** [upload] Explicit exit, status 2 ERROR: APP: MMM

Please guide on this. working through platformio is more convenient for me.

[Wiz-IO]

you can use QFlash tool I have any bugs in python uploader ( MC60 / M66 )

[umeshwalkar]

ok. using QFlash tool it works.