search

WorldWilderLab / PlanEt_SMD

smd version of planEt
2 stars 0 forks source link

C3 and C4 in extended BOM is only available in bulk quantities #7

Open lifthoofd opened 9 years ago

lifthoofd commented 9 years ago

minimum amounts range from 1000 to 3000, for our purposes its better if we have an alternative that can be bought in small quantities

ghost commented 9 years ago

The substitute that farnell offer is OK :

http://uk.farnell.com/multicomp/mcesl35v106m5x5-2/cap-alu-elec-10uf-35v-smd/dp/1870621

In fact, the component is not critical. Any 5mm diameter 10uF 10V + (eg 25V, 35V) will do.

http://uk.farnell.com/webapp/wcs/stores/servlet/Search?catalogId=15001&langId=44&storeId=10151&categoryId=700000005421&pageSize=25&showResults=true&pf=110029775,110119879,110130369,110183885

lifthoofd commented 9 years ago

ok! shall we change the part number in the partlist in the repo? or would it be better to leave the other partnumber?

ghost commented 9 years ago

I would change it in the bom.csv, but I tried to do that yesterday and couldn't find where it was set ! So I'd just put it in the shopping list for now as an equivalent. It's not wrong, as such. I'm not sure that suppliers are really part of the schematic design.

On Wed, Oct 28, 2015 at 12:51 PM, Erik notifications@github.com wrote:

ok! shall we change the part number in the partlist in the repo? or would it be better to leave the other partnumber?

— Reply to this email directly or view it on GitHub https://github.com/WorldWilderLab/PlanEt_SMD/issues/7#issuecomment-151834123 .

lifthoofd commented 9 years ago

ok, yeah my main concern is not as much suppliers but people that might be interested in making one for themselves. But lets leave it for now as is.

ghost commented 9 years ago

But you can't really keep a list of suppliers part numbers up to date. The part spec (value and footprint) ought to be enough.

On Wed, Oct 28, 2015 at 1:09 PM, Erik notifications@github.com wrote:

ok, yeah my main concern is not as much suppliers but people that might be interested in making one for themselves. But lets leave it for now as is.

— Reply to this email directly or view it on GitHub https://github.com/WorldWilderLab/PlanEt_SMD/issues/7#issuecomment-151841045 .

lifthoofd commented 9 years ago

ok, fair enough!

On Wed, Oct 28, 2015 at 2:16 PM, artag notifications@github.com wrote:

But you can't really keep a list of suppliers part numbers up to date. The part spec (value and footprint) ought to be enough.

On Wed, Oct 28, 2015 at 1:09 PM, Erik notifications@github.com wrote:

ok, yeah my main concern is not as much suppliers but people that might be interested in making one for themselves. But lets leave it for now as is.

— Reply to this email directly or view it on GitHub < https://github.com/WorldWilderLab/PlanEt_SMD/issues/7#issuecomment-151841045

.

— Reply to this email directly or view it on GitHub https://github.com/WorldWilderLab/PlanEt_SMD/issues/7#issuecomment-151842444 .

tel: +31624144454 web: http://www.lifthoofd.nl email: eovermeire@gmail.com