Power value L3

[Schampbakken]

Hello,

i'm missing the power value of L3. L1 and 2 work perfect but L3 is missing. When I look in InverterMsg.py I see the next code. I added a print for debug

`` def p_ac(self, i=1): """Power output of the output channel

    Available channels are 1, 2 or 3; if no tin this range the function will
    default to channel 1.

    Args:
        i (int): output channel (valid values: 1, 2, 3)

    Returns:
        float: Power output of channel i
    """
    if i not in range(1, 4):
        i = 1
    num = 59 + (i - 1) * 4
    print num, ": L", i, ": ", int(self.__get_short(num, 1))
    return int(self.__get_short(num, 1))  # Don't divide

`` In the console it looks like: 59 : L 1 : 394 63 : L 2 : 380 67 : L 3 : 0

What can this be? Or is this not the power for each phase?

[Schampbakken]

Think I found it! I think the multilpier should be 2 instead of 4. Think the value is in 2 bytes instead of 4.

num = 59 + (i - 1) * 2

[XtheOne]

Nope... From the data frame layout table: f_ac1 57 2 100 Hz Frequency of the AC output channel 1. p_ac1 59 2 1 W Power output of the AC output channel 1. f_ac2 62 2 100 Hz Frequency of the AC output channel 2. p_ac2 63 2 1 W Power output of the AC output channel 2. f_ac3 65 2 100 Hz Frequency of the AC output channel 3. p_ac3 67 2 1 W Power output of the AC output channel 3. Maybe you have an old logger which outputs an old frame type. A dump is needed then to look.