search

XBeeInternetGateway / XIG

XBee Internet Gateway for the Digi ConnectPort and Digi XBee
11 stars 12 forks source link

Node Discover command from Idigi cloud webservice cannot discover more than 4 Routers or End Device. #35

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
I setup 1 network with XB24-ZB module:

1 Xbee Coordinator API firware 21A7 (PANID=1;OP=1;CH=1A;NT=3C;NC=A) Using XBee 
Explorer USB, install the XBee Internet Gateway for window platform as this 
link : http://code.google.com/p/xig/wiki/Windows_Installation

*. Then I setup another 4 Routers with AT Firmware 22A7 
(PANID=1;OP=1;CH=1A;NT=3C;NJ=FF;JV=1). I also use 4 XBee USB interface boards 
to power on these Router for testing. 

if I using X-CTU program connect to Coordinator I can discover all the zigbee 
router and also can do API remote command to every router without any 
problem.(You can see in picture Case1 & Case2 in zip file)

Then I run xig_app.exe to start the XIG application.
After add this gateway to my idigi cloud account successful. I can 
commumication and send command to 4 Router by webservice. 

I then went to Web Services - Examples - SCI - RCI - XBee - Discover Nodes 
example and modified it to have the device id of my gateway. I then posted the 
request and in my response I got the respond with only ID adddress with 
Gateway. This Node discover command can only work with 3 Routers or less. More 
than 4 router it does not work, and the response only have the Address of 
Gateway(Coordinator). you can see in the picture Case 3.

And Sometime if I reset the Coordinator and just power on 3 Router I can 
discover 3 address of these Routers. But when I continued power the Router 
number 4...it comeback to received only Coordinator address.

What is the expected output? What do you see instead?
Suppose to see the address of all the router. But we only can see the address 
of gateway xbee module when we power on more than 4 router in the network.

What version of the product are you using?
1.Xbee Coordinator API firware 21A7
2. 4 Routers with AT Firmware 22A7 

Please provide any additional information below.
If we using XCTU program from digi we can discover all the routers in the 
network.

Original issue reported on code.google.com by johnniet...@gmail.com on 20 Nov 2012 at 6:46

Attachments: