junegucas
commented
8 years ago 猜测你用的一键安装脚本，安装后即刻执行xxnet，xxnet已经成功运行并且扫描到ip了。另外为什么默认会监听1080端口？x-tunnel默认是不开启的。浏览器http://127.0.0.1:8085看下远控页面能否连上，状态是否正常。 建议第二次运行不要用一键安装脚本，重新下载xxnet并执行。
Open db-one opened 8 years ago
junegucas
commented
8 years ago 猜测你用的一键安装脚本，安装后即刻执行xxnet，xxnet已经成功运行并且扫描到ip了。另外为什么默认会监听1080端口？x-tunnel默认是不开启的。浏览器http://127.0.0.1:8085看下远控页面能否连上，状态是否正常。 建议第二次运行不要用一键安装脚本，重新下载xxnet并执行。
db-one
commented
8 years ago 
jzp820927
commented
8 years ago 建议自己安装，然后后台执行就可以了。
ghost
commented
6 years ago 😂强烈建议楼主：标题追加【已解决】 https://github.com/XX-net/XX-Net/issues/10183
[Uploading QQ截图20160701204319.png…]() 如图 截至发帖已经扫描4800个IP，用时12个多小时了，下面贴出安装记录
ASUSWRT-Merlin RT-AC68U 380.59-X6.6.1 Wed Jun 1 13:51:01 UTC 2016 kang_mk@RT-AC68P:/tmp/home/root# sh /tmp/install_xxnet.sh Info: This script was created by ryzhov_al and TeHashX modified by wxing82 Info: Thanks @zyxmon & @ryzhov_al for New Generation Entware Info: and @Rmerlin for his awesome firmwares Info: This script will guide you through the Entware-NG /tmp/install_xxnet.sh: line 19: XX-Net: not found Info: Script modifies only "entware-ng" folder on the chosen drive, Info: no other data will be touched. Existing installation will be Info: replaced with this one. Also some start scripts will be installed, Info: the old ones will be saved on partition where Entware-NG is installed Info: like /tmp/mnt/sda1/jffs_scripts_backup.tgz
Info: Looking for available partitions... [1] --> /tmp/mnt/Download => Please enter partition number or 0 to exit
Info: /tmp/mnt/Download selected.
2016-07-01 10:08:21 (53.1 MB/s) - written to stdout [1564/1564]
Info: Checking for prerequisites and creating folders... Warning: Folder /opt exists! Info: Opkg package manager deployment... --2016-07-01 10:08:21-- http://pkg.entware.net/binaries/armv7/installer/opkg Resolving pkg.entware.net... 81.4.123.217 Connecting to pkg.entware.net|81.4.123.217|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 127488 (125K) [text/plain] Saving to: '/opt/bin/opkg'
/opt/bin/opkg 100%[=====================>] 124.50K 84.5KB/s in 1.5s
2016-07-01 10:08:23 (84.5 KB/s) - '/opt/bin/opkg' saved [127488/127488]
--2016-07-01 10:08:23-- http://pkg.entware.net/binaries/armv7/installer/opkg.co nf Resolving pkg.entware.net... 81.4.123.217 Connecting to pkg.entware.net|81.4.123.217|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 142 [text/plain] Saving to: '/opt/etc/opkg.conf'
/opt/etc/opkg.conf 100%[=====================>] 142 --.-KB/s in 0s
2016-07-01 10:08:24 (5.39 MB/s) - '/opt/etc/opkg.conf' saved [142/142]
--2016-07-01 10:08:24-- http://pkg.entware.net/binaries/armv7/installer/ld-2.23 .so Resolving pkg.entware.net... 81.4.123.217 Connecting to pkg.entware.net|81.4.123.217|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 142752 (139K) [text/plain] Saving to: '/opt/lib/ld-2.23.so'
/opt/lib/ld-2.23.so 100%[=====================>] 139.41K 81.6KB/s in 1.7s
2016-07-01 10:08:27 (81.6 KB/s) - '/opt/lib/ld-2.23.so' saved [142752/142752]
--2016-07-01 10:08:27-- http://pkg.entware.net/binaries/armv7/installer/libc-2. 23.so Resolving pkg.entware.net... 81.4.123.217 Connecting to pkg.entware.net|81.4.123.217|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1227404 (1.2M) [text/plain] Saving to: '/opt/lib/libc-2.23.so'
/opt/lib/libc-2.23. 100%[=====================>] 1.17M 302KB/s in 4.0s
2016-07-01 10:08:31 (302 KB/s) - '/opt/lib/libc-2.23.so' saved [1227404/1227404]
--2016-07-01 10:08:31-- http://pkg.entware.net/binaries/armv7/installer/libgcc_ s.so.1.2.23 Resolving pkg.entware.net... 81.4.123.217 Connecting to pkg.entware.net|81.4.123.217|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 39632 (39K) [text/plain] Saving to: '/opt/lib/libgcc_s.so.1'
/opt/lib/libgcc_s.s 100%[=====================>] 38.70K 53.3KB/s in 0.7s
2016-07-01 10:08:33 (53.3 KB/s) - '/opt/lib/libgcc_s.so.1' saved [39632/39632]
Info: Basic packages installation... Downloading http://pkg.entware.net/binaries/armv7/Packages.gz. Updated list of available packages in /opt/var/opkg-lists/packages. Installing entware-opt (222108-2) to root... Downloading http://pkg.entware.net/binaries/armv7/entware-opt_222108-2_armv7soft .ipk. Installing libc (2.23-4) to root... Downloading http://pkg.entware.net/binaries/armv7/libc_2.23-4_armv7soft.ipk. Installing libgcc (5.3.0-4) to root... Downloading http://pkg.entware.net/binaries/armv7/libgcc_5.3.0-4_armv7soft.ipk. Installing libssp (5.3.0-4) to root... Downloading http://pkg.entware.net/binaries/armv7/libssp_5.3.0-4_armv7soft.ipk. Installing librt (2.23-4) to root... Downloading http://pkg.entware.net/binaries/armv7/librt_2.23-4_armv7soft.ipk. Installing libpthread (2.23-4) to root... Downloading http://pkg.entware.net/binaries/armv7/libpthread_2.23-4_armv7soft.ip k. Installing libstdcpp (5.3.0-4) to root... Downloading http://pkg.entware.net/binaries/armv7/libstdcpp_5.3.0-4_armv7soft.ip k. Installing ldconfig (2.23-4) to root... Downloading http://pkg.entware.net/binaries/armv7/ldconfig_2.23-4_armv7soft.ipk. Installing findutils (4.6.0-1) to root... Downloading http://pkg.entware.net/binaries/armv7/findutils_4.6.0-1_armv7soft.ip k. Installing terminfo (6.0-1) to root... Downloading http://pkg.entware.net/binaries/armv7/terminfo_6.0-1_armv7soft.ipk. Installing locales (2.23-4) to root... Downloading http://pkg.entware.net/binaries/armv7/locales_2.23-4_armv7soft.ipk. Configuring libgcc. Configuring libc. Configuring libssp. Configuring libpthread. Configuring librt. Configuring terminfo. Configuring ldconfig. Configuring locales. Entware uses separate locale-archive file independent from main system Creating locale archive - /opt/usr/lib/locale/locale-archive Adding en_EN.UTF-8 Adding ru_RU.UTF-8 You can download locale sources from http://pkg.entware.net/sources/i18n_glib223 .tar.gz You can add new locales to Entware using /opt/bin/localedef.new Configuring libstdcpp. Configuring findutils. Configuring entware-opt. Updating /opt/etc/ld.so.cache... done. Info: Congratulations! Info: If there are no errors above then Entware-ng was successfully initialized. Info: Add /opt/bin & /opt/sbin to your PATH variable Info: Add '/opt/etc/init.d/rc.unslung start' to startup script for Entware-ng se rvices to start Info: Found a Bug? Please report at https://github.com/Entware-ng/Entware-ng/iss ues Package terminfo (6.0-1) installed in root is up to date. Router model
RT-AC68P
SWAP FILE
Choose swap file size (Highly Recommended)
Congratulations! If there are no errors above then Entware-NG is successfully in itialized.
Found a Bug? Please report at https://github.com/Entware-ng/Entware-ng/issues
Info: install pyopenssl... Installing python-pyopenssl (16.0.0-1) to root... Downloading http://pkg.entware.net/binaries/armv7/python-pyopenssl_16.0.0-1_armv 7soft.ipk. Installing python-light (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-light_2.7.11-8_armv7sof t.ipk. Installing python-base (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-base_2.7.11-8_armv7soft .ipk. Installing zlib (1.2.8-1) to root... Downloading http://pkg.entware.net/binaries/armv7/zlib_1.2.8-1_armv7soft.ipk. Installing libffi (3.0.13-1) to root... Downloading http://pkg.entware.net/binaries/armv7/libffi_3.0.13-1_armv7soft.ipk. Installing libbz2 (1.0.6-2) to root... Downloading http://pkg.entware.net/binaries/armv7/libbz2_1.0.6-2_armv7soft.ipk. Installing python-cryptography (1.3.1-1) to root... Downloading http://pkg.entware.net/binaries/armv7/python-cryptography_1.3.1-1_ar mv7soft.ipk. Installing libopenssl (1.0.2h-1) to root... Downloading http://pkg.entware.net/binaries/armv7/libopenssl_1.0.2h-1_armv7soft. ipk. Installing python (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python_2.7.11-8_armv7soft.ipk. Installing python-ctypes (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-ctypes_2.7.11-8_armv7so ft.ipk. Installing python-pydoc (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-pydoc_2.7.11-8_armv7sof t.ipk. Installing python-multiprocessing (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-multiprocessing_2.7.11- 8_armv7soft.ipk. Installing python-logging (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-logging_2.7.11-8_armv7s oft.ipk. Installing python-codecs (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-codecs_2.7.11-8_armv7so ft.ipk. Installing python-sqlite3 (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-sqlite3_2.7.11-8_armv7s oft.ipk. Installing libsqlite3 (3120200-1) to root... Downloading http://pkg.entware.net/binaries/armv7/libsqlite3_3120200-1_armv7soft .ipk. Installing python-gdbm (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-gdbm_2.7.11-8_armv7soft .ipk. Installing libgdbm (1.11-1) to root... Downloading http://pkg.entware.net/binaries/armv7/libgdbm_1.11-1_armv7soft.ipk. Installing python-email (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-email_2.7.11-8_armv7sof t.ipk. Installing python-distutils (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-distutils_2.7.11-8_armv 7soft.ipk. Installing python-xml (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-xml_2.7.11-8_armv7soft. ipk. Installing libexpat (2.1.0-3) to root... Downloading http://pkg.entware.net/binaries/armv7/libexpat_2.1.0-3_armv7soft.ipk . Installing python-compiler (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-compiler_2.7.11-8_armv7 soft.ipk. Installing python-db (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-db_2.7.11-8_armv7soft.i pk. Installing libdb47 (4.7.25.4.NC-5) to root... Downloading http://pkg.entware.net/binaries/armv7/libdb47_4.7.25.4.NC-5_armv7sof t.ipk. Installing libxml2 (2.9.3-1) to root... Downloading http://pkg.entware.net/binaries/armv7/libxml2_2.9.3-1_armv7soft.ipk. Installing python-openssl (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-openssl_2.7.11-8_armv7s oft.ipk. Installing python-decimal (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-decimal_2.7.11-8_armv7s oft.ipk. Installing python-unittest (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-unittest_2.7.11-8_armv7 soft.ipk. Installing python-ncurses (2.7.11-8) to root... Downloading http://pkg.entware.net/binaries/armv7/python-ncurses_2.7.11-8_armv7s oft.ipk. Installing libncurses (6.0-1) to root... Downloading http://pkg.entware.net/binaries/armv7/libncurses_6.0-1_armv7soft.ipk . Installing python-cffi (1.5.2-2) to root... Downloading http://pkg.entware.net/binaries/armv7/python-cffi_1.5.2-2_armv7soft. ipk. Installing python-pycparser (2.14-3) to root... Downloading http://pkg.entware.net/binaries/armv7/python-pycparser_2.14-3_armv7s oft.ipk. Installing python-ply (3.8-3) to root... Downloading http://pkg.entware.net/binaries/armv7/python-ply_3.8-3_armv7soft.ipk . Installing python-enum34 (1.1.2-1) to root... Downloading http://pkg.entware.net/binaries/armv7/python-enum34_1.1.2-1_armv7sof t.ipk. Installing python-idna (2.1-1) to root... Downloading http://pkg.entware.net/binaries/armv7/python-idna_2.1-1_armv7soft.ip k. Installing python-ipaddress (1.0.16-1) to root... Downloading http://pkg.entware.net/binaries/armv7/python-ipaddress_1.0.16-1_armv 7soft.ipk. Installing python-pyasn1 (0.1.9-1) to root... Downloading http://pkg.entware.net/binaries/armv7/python-pyasn1_0.1.9-1_armv7sof t.ipk. Installing python-six (1.10.0-1) to root... Downloading http://pkg.entware.net/binaries/armv7/python-six_1.10.0-1_armv7soft. ipk. Installing python-setuptools (20.7.0-1) to root... Downloading http://pkg.entware.net/binaries/armv7/python-setuptools_20.7.0-1_arm v7soft.ipk. Installing ca-certificates (20160104) to root... Downloading http://pkg.entware.net/binaries/armv7/ca-certificates_20160104_all.i pk. Configuring zlib. Configuring python-base. Configuring libffi. Configuring libbz2. Configuring python-light. Configuring python-idna. Configuring python-codecs. Configuring libxml2. Configuring libdb47. Configuring python-db. Configuring python-ply. Configuring python-decimal. Configuring python-six. Configuring python-pyasn1. Configuring python-distutils. Configuring python-pydoc. Configuring python-ctypes. Configuring python-multiprocessing. Configuring python-logging. Configuring libsqlite3. Configuring python-sqlite3. Configuring libgdbm. Configuring python-gdbm. Configuring python-email. Configuring libexpat. Configuring python-xml. Configuring python-compiler. Configuring libopenssl. Configuring python-openssl. Configuring python-unittest. Configuring libncurses. Configuring python-ncurses. Configuring python. Configuring python-pycparser. Configuring python-cffi. Configuring ca-certificates. Configuring python-setuptools. Configuring python-enum34. Configuring python-ipaddress. Configuring python-cryptography. Configuring python-pyopenssl. Info: Download latest XX-Net... --2016-07-01 10:11:24-- https://github.com/XX-net/XX-Net/archive/master.zip Resolving github.com... 192.30.253.113 Connecting to github.com|192.30.253.113|:443... connected. WARNING: cannot verify github.com's certificate, issued by '/C=US/O=DigiCert Inc /OU=www.digicert.com/CN=DigiCert SHA2 Extended Validation Server CA': Unable to locally verify the issuer's authority. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/XX-net/XX-Net/zip/master [following] --2016-07-01 10:11:26-- https://codeload.github.com/XX-net/XX-Net/zip/master Resolving codeload.github.com... 192.30.253.120 Connecting to codeload.github.com|192.30.253.120|:443... connected. WARNING: cannot verify codeload.github.com's certificate, issued by '/C=US/O=Dig iCert Inc/OU=www.digicert.com/CN=DigiCert SHA2 High Assurance Server CA': Unable to locally verify the issuer's authority. HTTP request sent, awaiting response... 200 OK Length: 14274495 (14M) [application/zip] Saving to: '/opt/tmp/master.zip'
/opt/tmp/master.zip 100%[=====================>] 13.61M 995KB/s in 17s
2016-07-01 10:11:44 (818 KB/s) - '/opt/tmp/master.zip' saved [14274495/14274495]
Info: Installing the XX-Net... Info: Installing Bash... Installing bash (4.3.42-1a) to root... Downloading http://pkg.entware.net/binaries/armv7/bash_4.3.42-1a_armv7soft.ipk. Configuring bash. Info: Try to run the XX-Net for testing... Python 2.7.11 XX-Net version:default Jul 01 02:12:06.477 - [INFO] use build-in openssl lib Jul 01 02:12:08.505 - [INFO] start XX-Net 3.2.4 Jul 01 02:12:08.505 - [DEBUG] start confirm_xxnet_exit Jul 01 02:12:08.514 - [DEBUG] good, xxnet:8087 cleared! Jul 01 02:12:08.518 - [DEBUG] good, xxnet:8085 clear! Jul 01 02:12:08.519 - [DEBUG] finished confirm_xxnet_exit Jul 01 02:12:08.526 - [INFO] migrating to 3.x.x Jul 01 02:12:09.932 - [INFO] SSL use version:TLSv1_2 Jul 01 02:12:09.935 - [INFO] OpenSSL support alpn Jul 01 02:12:10.004 - [INFO] load ip range file:/tmp/mnt/Download/entware-ng.arm /xxnet/code/default/gae_proxy/local/ip_range.txt Jul 01 02:12:10.273 - [INFO] load google ip_list num:0, gws num:0 Jul 01 02:12:10.368 - [INFO] OpenSSL support alpn Jul 01 02:12:10.365 - [DEBUG] network is ok, cost:990 ms Jul 01 02:12:10.441 - [WARNING] no enough ip Jul 01 02:12:10.545 - [DEBUG] ## GAEProxy set keep_running: True Jul 01 02:12:10.548 - [INFO] --------------------------------------------------- --- Jul 01 02:12:10.548 - [INFO] Python Version : 2.7.11 Jul 01 02:12:10.552 - [INFO] OS : Dist:; Version:; ID: Jul 01 02:12:10.553 - [INFO] Listen Address : 127.0.0.1:8087 Jul 01 02:12:10.553 - [INFO] GAE APPID : Jul 01 02:12:10.553 - [INFO] Pac Server : http://127.0.0.1:8086/proxy.pa c Jul 01 02:12:10.553 - [INFO] --------------------------------------------------- --- Jul 01 02:12:10.554 - [INFO] no CA file exist Jul 01 02:12:10.554 - [INFO] clean old site certs Jul 01 02:12:10.558 - [INFO] generate CA file:/tmp/mnt/Download/entware-ng.arm/x xnet/data/gae_proxy/CA.crt Jul 01 02:12:10.942 - [WARNING] no enough ip Jul 01 02:12:11.443 - [WARNING] no enough ip Jul 01 02:12:11.945 - [WARNING] no enough ip Jul 01 02:12:12.446 - [WARNING] no enough ip Jul 01 02:12:12.947 - [WARNING] no enough ip Jul 01 02:12:13.455 - [WARNING] no enough ip Jul 01 02:12:13.950 - [WARNING] no enough ip Jul 01 02:12:14.455 - [WARNING] no enough ip Jul 01 02:12:14.958 - [WARNING] no enough ip Jul 01 02:12:15.459 - [WARNING] no enough ip Jul 01 02:12:15.960 - [WARNING] no enough ip Jul 01 02:12:16.465 - [WARNING] no enough ip Jul 01 02:12:16.966 - [WARNING] no enough ip Jul 01 02:12:17.468 - [WARNING] no enough ip Jul 01 02:12:17.970 - [WARNING] no enough ip Jul 01 02:12:18.471 - [WARNING] no enough ip Jul 01 02:12:18.972 - [WARNING] no enough ip Jul 01 02:12:19.475 - [WARNING] no enough ip Jul 01 02:12:19.976 - [WARNING] no enough ip Jul 01 02:12:24.800 - [INFO] create CA Jul 01 02:12:24.804 - [INFO] server 127.0.0.1:8087 started. Jul 01 02:12:24.806 - [INFO] server 127.0.0.1:8086 started. Jul 01 02:12:24.897 - [INFO] module gae_proxy started Jul 01 02:12:24.897 - [INFO] start gae_proxy time cost:16342 ms WARNING:root:Load Crypto.Cipher.ARC4 Failed, Use Pure Python Instead. Jul 01 02:12:25.136 - [INFO] use config_path:/tmp/mnt/Download/entware-ng.arm/xx net/data/x_tunnel/client.json Jul 01 02:12:25.137 - [INFO] Use proxy:127.0.0.1:8087 Jul 01 02:12:25.137 - [DEBUG] x-tunnel no account Jul 01 02:12:25.138 - [WARNING] x-tunnel session not start Jul 01 02:12:25.139 - [ERROR] bind to 127.0.0.1:1080 fail:error(98, 'Address alr eady in use') Exception in thread Thread-80: Traceback (most recent call last): File "/opt/lib/python2.7/threading.py", line 801, in *bootstrap_inner self.run() File "/opt/lib/python2.7/threading.py", line 754, in run self.__target(_self.__args, _self.__kwargs) File "/tmp/mnt/Download/entware-ng.arm/xxnet/code/default/x_tunnel/start.py", line 19, in main client.main() File "/tmp/mnt/Download/entware-ng.arm/xxnet/code/default/x_tunnel/local/clien t.py", line 154, in main g.socks5_server = simple_http_server.HTTPServer((g.config.socks_host, g.conf ig.socks_port), Socks5Server) File "/tmp/mnt/Download/entware-ng.arm/xxnet/code/default/python27/1.0/lib/noa rch/simple_http_server.py", line 263, in __init** self.init_socket() File "/tmp/mnt/Download/entware-ng.arm/xxnet/code/default/python27/1.0/lib/noa rch/simple_http_server.py", line 268, in init_socket self.add_listen(addr) File "/tmp/mnt/Download/entware-ng.arm/xxnet/code/default/python27/1.0/lib/noa rch/simple_http_server.py", line 278, in add_listen raise Exception(err_string) Exception: bind to 127.0.0.1:1080 fail:error(98, 'Address already in use')
Jul 01 02:12:37.627 - [INFO] scan_ip add ip:189.45.193.233 time:1060 Jul 01 02:12:42.898 - [INFO] scan_ip add ip:177.35.32.209 time:838 Jul 01 02:12:44.058 - [INFO] scan_ip add ip:113.171.252.205 time:523 Jul 01 02:12:49.653 - [INFO] scan_ip add ip:203.113.160.96 time:962 Jul 01 02:12:52.161 - [INFO] scan_ip add ip:210.245.14.231 time:1226 Jul 01 02:12:52.912 - [INFO] scan_ip add ip:220.225.89.39 time:902 Jul 01 02:12:55.976 - [INFO] scan_ip add ip:115.164.12.142 time:2001 Jul 01 02:13:02.572 - [INFO] scan_ip add ip:76.75.38.159 time:741 Jul 01 02:13:04.147 - [INFO] scan_ip add ip:103.25.178.41 time:474 Jul 01 02:13:09.495 - [INFO] scan_ip add ip:198.70.69.121 time:774 Jul 01 02:13:10.115 - [INFO] scan_ip add ip:118.98.77.220 time:600
再往下面全部都是扫描IP的记录，求高手解答一下这是什么问题，难道不是应该按照成功之后再去扫描IP吗 怎么安装过程来扫描了，昨天已经扫了12个小时了，扫了5000个IP还没安装完成，就只能关机睡觉了？难道安装一次要这么久啊 #3770 #