Open marchdeep opened 7 years ago
帖子最后一步 七、回校还原 “Teredo 状态” 配置为 “已禁用状态”
检测完之后一定要再按照第四步重新设置好。之后可访问IPv6测试页。
四、重头戏,配置Teredo 1、“Teredo 状态” 配置为 “企业客户端”
谢谢 成功了
楼主用什么Teredo 服务器啊?我移动用上面服务器ping百分百超时啊。。开个会真烦人,想到外面下载个手机系统都下载不了,用个谷歌翻译网页都不行。
请问楼主及各位大神:ipv6开启后,不用代理软件可以突破封锁?
以下几个服务器可通过ping通的质量择优选取,本机能ping通就两个teredo.trex.fi 和 teredo.remlab.net ,目测也就这连个可以用了 teredo.remlab.net / teredo-debian.remlab.net (Germany) teredo.autotrans.consulintel.com (Spain) teredo.ipv6.microsoft.com (USA, Redmond) (default for WindowsXP/2003/Vista/2008 OS) teredo.ngix.ne.kr (South Korea) teredo.managemydedi.com (USA, Chicago) teredo.trex.fi (Finland) 更多服务器动态请前往 http://en.wikipedia.org/wiki/Teredo_tunneling#Servers 查看
设置好IPV6 一样要用管理员权限打开XX-Net 才能正常设置上网。
我按教程设置成功了啊,为什么http://test-ipv6.com/这里还是没通过
xxnet也还是启用IPv6失败,请确认你的网络支持IPv6。
隧道适配器 Teredo Tunneling Pseudo-Interface:
类型 : enterpriseclient (Group Policy) 服务器名称 : teredo.remlab.net (Group Policy) 客户端刷新间隔 : 30 秒 客户端端口 : unspecified 状态 : qualified 客户端类型 : teredo client 网络 : unmanaged NAT : restricted (port) NAT 特殊行为 : UPNP: 是,PortPreserving: 否 本地映射 : 192.168.2.116:57717 外部 NAT 映射 : 118.116.104.121:3586
Test with IPv4 DNS record | ok (0.636s) using ipv4 | |
---|---|---|
Test with IPv6 DNS record | bad (0.300s) | |
Test with Dual Stack DNS record | ok (0.928s) using ipv4 | |
Test for Dual Stack DNS and large packet | ok (0.860s) using ipv4 | |
Test IPv4 without DNS | ok (0.632s) using ipv4 | |
Test IPv6 without DNS | timeout (16.949s) | |
Test IPv6 large packet | bad (0.244s) | |
Test if your ISP's DNS server uses IPv6 | bad (2.767s) | |
Find IPv4 Service Provider | ok (1.118s) using ipv4 ASN 4134 | |
Find IPv6 Service Provider | bad (0.344s) |
teredo服务器能ping通,但是第五部状态显示OFFLINE,错误 未能打开隧道适配器
@marchdeep 第七步 回校还原 的意思是“回到学校关闭Teredo还原到教育网直接连接ipv6网络的状态”。
我也不知道第七步有什么用,其实可以不用管他,第七步直接忽略掉能开通上网就行。 你要是按照第七步设置了后还要重新按照第四步设置一下才行。
win10按照操作之后,最后的结果是
C:\windows\system32>netsh int ipv6 show teredo state Teredo 参数 --------------------------------------------- 类型 : disabled 服务器名称 : teredo.remlab.net 客户端刷新间隔 : 30 秒 客户端端口 : unspecified 状态 : offline 错误 : 无
启用ipv6,请参考: https://github.com/XX-net/XX-Net/issues/6918 按照帖子操作没成功。
后来网上搜到IPV6的开启方法 终于成功开启IPV6 ,大家可以参考一下。 http://bbs.pcbeta.com/forum.php?mod=viewthread&tid=1580771
XX-Net Status:
sys-platform: AMD64, Windows-10-10.0.15063 os-system: Windows os-version: 10.0.15063 os-release: 10 os-detail: Version:10-0; Build:15063; Platform:2; CSD:; ServicePack:0-0; Suite:256; ProductType:0 architecture: 32bit,WindowsPE browser: Mozilla/5.0 (Windows NT 10.0; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/60.0.3112.90 Safari/537.36 xxnet-version: 3.6.11
python-version: 2.7.13 openssl-version: 16.0.0 TLSv1_2 h2:alpn
ipv6-status: 1 gws-ip-num: total:12347 good:12281 network-status: OK connected-link: new:2 used:0 worker: h1:19 h2:0 scan-ip-thread-num: 0 ip-quality: 300 is-idle: 0 block-stat: OK proxy_state: OK ca_state: OK Appid_Working: true Appids_Out_Of_Quota: false Appids_Not_Exist: false Using_Public_Appid: false