zcu102 cannot boot from SD card

Xilinx / Vitis-Tutorials

Vitis In-Depth Tutorials

https://Xilinx.github.io/Vitis-Tutorials/

MIT License

1.2k stars 552 forks source link

zcu102 cannot boot from SD card #415

Closed zhangapeng closed 8 months ago

zhangapeng commented 11 months ago

When I followed the tutorial ”Vitis-Tutorials/blob/2023.1/Getting_Started/Vitis/Part4-embedded_platform.md“ to operate on the GUI of vitis, the generated sd.img could not be started after burning. I use the base platform when building the project, and then the domain was also set up. There was no problem in compiling after the hardware was built，generate sdcard, but cannot boot from the SD card after burning it, how should I solve it?

sven2314 commented 9 months ago

@zhangapeng Hi, Before trying to boot from SD card, I think you need to set the boot MODE to SD mode. Besides, do you observe any outputs from UART terminal of zcu102. If so, Could you provide the output log from UART terminal so that we could do further investigation. Thanks.

imrickysu commented 8 months ago

Hi @zhangapeng , this topic requires more details from your side.

Since we didn't hear back from you, I'm closing this thread for now. Feel free to reopen it if you can add more details.