Open function47 opened 1 year ago
I was running a loopback test. I found that the Tx MBits/s rate doesn't match up with Rx rate as shown below. However, once I used Pktgen 21.03.1. It is gone.
I also noticed this discrepancy in this post.
Ports 0-1 of 2 <Main Page> Copyright (c) <2010-2020>, Intel Corporation Flags:Port : P------Range :0 P------Range :1PMD: qdma_dev_link_update(): Link update done Link State : <UP-100000-FD> <UP-100000-FD> ---Total Rate--- Pkts/s Max/Rx : 7675460/7557906 7368360/7251015 15043820/14808921 Max/Tx : 7383936/7263393 7695872/7573920 15079808/14837313 MBits/s Rx/Tx : 48712/1394 45772/1454 94484/2848 Broadcast : 0 0 Multicast : 0 0 Sizes 64 : 1558894 854696 65-127 : 20026127 20171588 128-255 : 41562202 40255501 256-511 : 79199307 82529526 512-1023 : 158741787 152219145 1024-1518 : 154165462 140864226 Runts/Jumbos : 0/0 0/0 ARP/ICMP Pkts : 0/0 0/0 Errors Rx/Tx : 0/0 0/0 Total Rx Pkts : 452242056 434001460 Tx Pkts : 434765600 453223840 Rx MBs : 2914836 2739635 Tx MBs : 83474 87018 : Pattern Type : abcd... abcd... Tx Count/% Rate : Forever /100% Forever /100% Pkt Size/Tx Burst : 64 / 32 64 / 32 TTL/Port Src/Dest : 4/ 1234/ 5678 4/ 1234/ 5678 Pkt Type:VLAN ID : IPv4 / TCP:0001 IPv4 / TCP:0001 802.1p CoS/DSCP/IPP : 0/ 0/ 0 0/ 0/ 0 VxLAN Flg/Grp/vid : 0000/ 0/ 0 0000/ 0/ 0 IP Destination : 192.168.1.1 192.168.0.1 Source : 192.168.0.1/24 192.168.1.1/24 MAC Destination : 15:16:17:18:19:1a 15:16:17:18:19:1a Source : 15:16:17:18:19:1a 15:16:17:18:19:1a PCI Vendor/Addr : 10ee:903f/3b:00.0 10ee:913f/3b:00.1 -- Pktgen 20.11.3 (DPDK 20.11.0) Powered by DPDK (pid:12297) ----------------
I was running a loopback test. I found that the Tx MBits/s rate doesn't match up with Rx rate as shown below. However, once I used Pktgen 21.03.1. It is gone.
I also noticed this discrepancy in this post.