Saw a previous ticket about this issue, but the "resolution" there didn't make any sense. Anyhow, I have a hard time getting the GNSS data to be anything other than just:
AT+CGNSSINFO
+CGNSSINFO: ,,,,,,,,
OK
getGPS 86981
AT+CGNSSINFO
+CGNSSINFO: ,,,,,,,,
OK
getGPS 88988
AT+CGNSSINFO
+CGNSSINFO: ,,,,,,,,
OK
Tried two different antennas, tested the connector on the PCB if it was damaged somehow, but nothing seems to work.
I have the unit in my window, and have let it run for more than 30 minutes without a change.
My unit version is "2022-5-22 V1.1 XY--A7670"
Yes, that's the example I'm using.
I bought the version with GNSS (from Banggood). GNSS antenna was included also, which I took as confirmation that I received the right type of unit.
Saw a previous ticket about this issue, but the "resolution" there didn't make any sense. Anyhow, I have a hard time getting the GNSS data to be anything other than just:
Tried two different antennas, tested the connector on the PCB if it was damaged somehow, but nothing seems to work. I have the unit in my window, and have let it run for more than 30 minutes without a change. My unit version is "2022-5-22 V1.1 XY--A7670"