Open carlosvidalgutierrez3 opened 8 months ago
In order to upload code to the board using a UART-USB bridge, one should also connect the 3v3 pin which is not shown in the schematic.
Change to this:
In order to upload code to the board using a UART-USB bridge, one should also connect the 3v3 pin which is not shown in the schematic.![image](https://github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G/assets/63464432/07034532-9b4f-44f1-bc1a-8086f70cae5c)
Change to this:![externalDownloader](https://github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G/assets/63464432/d3fa0e0b-1297-46f1-bf41-205bab894b85)