I hope that you have a solution for me, I am unable to get the camera feed to work with the T-Camera Mini.
I am able to build and flash the firmware using the steps in the main readme.md with PlatfomIO. Using default_envs = t-camera-mini and src_dir = examples/sketch. The device connects successfully to my WiFi network and when I navigate to the IP Address of the device, the user interface displays correctly.
However after trying to start a stream, the feed does not display
In the serial monitor a message displays Camera capture failed
And in the console I only see an empty response error
The camera feed did work out of the box, I could access the feed but only by connecting to it's access point. Now that I have started trying to flash it with my WiFi credentials it no longer works 😅
I hope that you have a solution for me, I am unable to get the camera feed to work with the T-Camera Mini.
I am able to build and flash the firmware using the steps in the main readme.md with PlatfomIO. Using
default_envs = t-camera-mini
andsrc_dir = examples/sketch
. The device connects successfully to my WiFi network and when I navigate to the IP Address of the device, the user interface displays correctly.However after trying to start a stream, the feed does not display
In the serial monitor a message displays
Camera capture failed
And in the console I only see an empty response error
The camera feed did work out of the box, I could access the feed but only by connecting to it's access point. Now that I have started trying to flash it with my WiFi credentials it no longer works 😅
I would appreciate any help with this 😁