Project not working on new board ESP32-S3 EPD47

Xinyuan-LilyGO / LilyGo-EPD-4-7-OWM-Weather-Display

Using the LilyGo EPD 4.7" display to show OWM Weather Data

64 stars 26 forks source link

Project not working on new board ESP32-S3 EPD47 #9

Open volprecht opened 2 months ago

volprecht commented 2 months ago

Project crash after boot, display stop response. Will be any update for new board?

ant-munich commented 1 month ago

Board v2.4 2024-01-15. With ESP32 V 2.0.17 and ArduinoJson 6.19.4 the Arduino IDE can compile the project and it works finally. The problem was that at the beginning the display was not being updated. I suspect the own_credentials.h shall be updated correctly first and it may require several attempts to fetch the weather info from the server and only then it updates the display.

asg02fever commented 2 weeks ago

for me after upload , nothing , screen is still at last image and serial show this :

Rebooting... ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0xc (RTC_SW_CPU_RST),boot:0xc (SPI_FAST_FLASH_BOOT) Saved PC:0x4209f31a SPIWP:0xee mode:DIO, clock div:1 load:0x3fce3808,len:0x4bc load:0x403c9700,len:0xbd8 load:0x403cc700,len:0x2a0c entry 0x403c98d0 Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled.

Core 1 register dump: