Closed dodo124 closed 2 months ago
Well first please specify which board you have.
Oh my bad. Sorry. I do have the following board: GO® LoRa32 V2.1_1.6. Regards Dominik
Are you sure it is this https://www.aliexpress.com/i/32872078587.html ? What does it say on the board? I don't see a second ipex connector for the wifi, only one for the LoRa antenna. If you look at for example the T3S3 v1.1 board (which I have right now), there are two ipex connectors.
Hi, Yes it's the board and it only has one ipx like it is shown in the picture. So I guess there is no way to attach a ipx to the board. The problem is that the onboard WLAN antenna has fallen off. So I can't turn on WiFi. Any suggestions in my particular case?
Regards Dominik
Am 21. September 2023 11:18:23 MESZ schrieb PBalint @.***>:
Are you sure it is this https://www.aliexpress.com/i/32872078587.html ? What does it say on the board? I don't see a second ipex connector for the wifi, only one for the LoRa antenna. If you look at for example the T3S3 v1.1 board (which I have right now), there are two ipex connectors.
-- Reply to this email directly or view it on GitHub: https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/issues/102#issuecomment-1729186341 You are receiving this because you authored the thread.
Message ID: @.***>
This issue is stale because it has been open for 30 days with no activity.
This issue was closed because it has been inactive for 14 days since being marked as stale.
Hi, which resistor has to be removed when using the ipx connector? I can't find the information.
Thanks Dominik