Closed dodo124 closed 3 months ago
Can it be measured that the GPS module is powered?
Hi. ,
Yes it can be measured but it is very undty...
Greetings Dom
Am 26. November 2023 13:33:38 MEZ schrieb Lewis He @.***>:
Can it be measured that the GPS module is powered?
-- Reply to this email directly or view it on GitHub: https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/issues/115#issuecomment-1826772169 You are receiving this because you authored the thread.
Message ID: @.***>
You can try to use this example, the results will be output in the Serial monitor. Please try https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/examples/GPS/UBlox_Recovery/UBlox_Recovery.ino
html,body{background-color:#fff;color:#333;line-height:1.4;font-family:sans-serif,Arial,Verdana,Trebuchet MS;}Hi Lewis, I followed the instructions but the problem still exists. It is always cold starting, so it takes about one day or two to get gps. No mater if there is a battery connected or not. Both batteries small and standby show 70-80% capacity but the last know location is lost. :-( Any ideas? Last year it was working flawlessly. Regards Dom Lewis He schrieb am 26.11.2023 15:04 (GMT +01:00):
You can try to use this example, the results will be output in the Serial monitor. Please tryhttps://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/examples/GPS/UBlox_Recovery/UBlox_Recovery.ino —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
This issue is stale because it has been open for 30 days with no activity.
This issue was closed because it has been inactive for 14 days since being marked as stale.
Hello and good morning,
I'm confronted with a new behaviour of my TTGO t-beam V1.1.
For the last couple of years it has worked perfectly as a TN mapper device.
But lately it cannot perform a warm start.
When I turn it off at 8pm and turn it on again at 6am, it has lost all GPS information.
The small battery next to the GPS module is almost empty and does not seem to be charged.
So should I do a factory reset or what else can I do?
Regards, Dom