search

Xinyuan-LilyGO / LilyGo-LoRa-Series

LILYGO LoRa Series examples
644 stars 177 forks source link

Unable to select the respective board during flash procedure #176

Closed strobesactual closed 3 months ago

strobesactual commented 3 months ago

I plug the Lilygo board into my Mac and i cannot see it on the left PlatformIO menu image

I am following the instructions listed on: https://www.lora-aprs.info/docs/LoRa_APRS_iGate/quick-start-guide/ I successfully get to Flashing, but am unable to select the device. I am using a LILYGO T3 v1.6.1 Model LORA32

To Reproduce Follow the link and go to "Flashing the Configuration" step 2

Expected behavior I should see the board

OS: Mac Sonoma 14.5 PlatformIO Version: 3.3.3 Firmware Version: Board name:

LILYGO LoRa32 433Mhz ESP32 Development Board OLED 0.96 Inch SD Card BLE WiFi TTGO Paxcounter Module https://a.co/d/0dd9yFzB

lewisxhe commented 3 months ago

Have you tried using a USB-A to USB-C cable? Have you installed the CH34x driver? http://www.wch.cn/downloads/CH34XSER_MAC_ZIP.html

strobesactual commented 3 months ago

Lewis,

Hello I installed the drivers and have used a USB-C to Micro USB cable. I see the drive on the computer but its not showing up on VS code to allow me to work on it. [image: image.png] [image: image.png] I believe this is correct but nothing shows up on VS Code: [image: image.png] This is the device: [image: IMG_0717 Large.jpeg]

Thank you for your help!

Kindly, Austin

On Fri, Jun 21, 2024 at 4:53 AM Lewis He @.***> wrote:

Have you tried using a USB-A to USB-C cable? Have you installed the CH34x driver? http://www.wch.cn/downloads/CH34XSER_MAC_ZIP.html

— Reply to this email directly, view it on GitHub https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/issues/176#issuecomment-2182418951, or unsubscribe https://github.com/notifications/unsubscribe-auth/BCBFLOJ2T6IAUKSB2JMSPTLZIPZ3FAVCNFSM6AAAAABJUXZQN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOBSGQYTQOJVGE . You are receiving this because you authored the thread.Message ID: @.***>

--

Austin Hulbert +1 410-279-3758 @.*** LinkedIn https://www.linkedin.com/in/austinhulbert/ | Schedule a Call https://calendly.com/austinhulbert/30min

strobesactual commented 3 months ago

I reinstalled the drivers on a separate computer and it worked. I think the first computer was having issues.