search

Xinyuan-LilyGO / LilyGo-LoRa-Series

LILYGO LoRa Series examples
603 stars 169 forks source link

No OLED working #53

Closed Gonellarro closed 1 year ago

Gonellarro commented 3 years ago

Hi, I recently bought an T-Beam v1.1 with OLED display and after doing everything in the doc, display shows nothing. I've selected TBEAM board from the Arduino IDE 1.8.3 I've copyed every library inside Arduino libraries folder I've loaded SSD1306Simple_demo. Set my board in utilities.h and compile everything fine, but nothing appears on the OLED display. What's wrong? Selection of the board?

Thank you in advance.

David-2D3FE9 commented 3 years ago

Hello, Did you fix your problem ?

cz-lucas commented 3 years ago

@Gonellarro Does the OLED have power? You need to to setup the DC1 channel of the AXP192.

Gonellarro commented 3 years ago

Hello,

Please excuse me that I've not replied yet. Since I wrote you I have not made any test on the board. I'll try again next july, because I can't invest time in this project. I'll write you as soon as I test it again.

Thank you for your concern, Martí.

Missatge de 10k-resistor @.***> del dia dl., 24 de maig 2021 a les 12:22:

@Gonellarro https://github.com/Gonellarro Does the OLED have power? You need to to setup the DC1 channel of the AXP192.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/issues/53#issuecomment-846944281, or unsubscribe https://github.com/notifications/unsubscribe-auth/AO5UP6PGPOEOWE4WMHLXP2DTPISIFANCNFSM43CKQZNA .

Firered97 commented 2 years ago

hye, i have the same problem, my oled display wont turn on eventhough the code is successfully compiled

lewisxhe commented 1 year ago

There is no activity for a long time. If there is still a problem, please reopen the problem