search

Xinyuan-LilyGO / LilyGo-T5-Epaper-Series

183 stars 60 forks source link

incorrect pinout on the pinout sheet #50

Closed rdekens closed 10 months ago

rdekens commented 10 months ago

couldn't get the 266 EPD to work with the examples until I went back to GxEPD rather than GxEPD2. Traced it back to GxEPD using the boards.h file - and from there to the correct pinouts to the 2.66 " epd - motably - as per the schematics - which are correct - the Display is MOSI 23 : correct MISO 17 : CLK 18 : correct CS 5 : correct RST : 16 WRONG -> 4 BUSY 4 WRONG -> 34 DC not shown - > 19 - - PIn 19 should be shown as used by the display and not available without due care

pin 17 Appears to have been unused - would have been good if it had been routed out instead of 19 , or used instead with the display. see attatched modified diagram corrected_266

the examples need to be adjusted to account for the different pinout also

lewisxhe commented 10 months ago

Thanks for the feedback, I have given it and will make changes soon