search

Xinyuan-LilyGO / T-Display-S3

MIT License
731 stars 173 forks source link

Can you provide a picture of the antenna section? #188

Closed Arielhh closed 1 month ago

teastainGit commented 9 months ago

(to :LilyGO Engineer): Here is a iPhone pic of my LilyGO T-Display S3 .

UFL

Are both the U.FL Ipex connector...AND...the built-in PCB 2D antenna connected to the ESP32? It looks like you need to move the 0 Ohm resistor 90 deg, from where it is shipped, to connect the U.FL Ipex connector. On my LilyGO T-Display S3 boards there is no continuity from the ESP32 to the U.FL centre pin. Many of us are asking for some clarity. -Terry

Arielhh commented 9 months ago

Yes, I already tried moving the 0 ohm resistor 90 degrees but same poor results with various antennas that I purchased. Also, I tried on a few different lilygo touch units, and the same poor results persist.

On Wed, Sep 20, 2023 at 7:01 PM Terry Stainton @.***> wrote:

Here is a iPhone pic of my LilyGO T-Display S3 . [image: Screenshot 2023-09-20 at 12 47 39 PM] https://user-images.githubusercontent.com/80008504/269361171-7d2f5c33-11a5-4847-8794-b0bd4722629b.png Are both the U.FL Ipex connector...AND...the built-in PCB 2D antenna connected to the ESP32? It looks like you need to move the 0 Ohm resistor 90 deg, from where it is shipped, to connect the U.FL Ipex connector. On my LilyGO T-Display S3 boards there is no continuity from the ESP32 to the U.FL centre pin. Many of us are asking for some clarity. -Terry

— Reply to this email directly, view it on GitHub https://github.com/Xinyuan-LilyGO/T-Display-S3/issues/188#issuecomment-1728121018, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABE77IFT6YFDJVKFBS6NFKTX3MOPXANCNFSM6AAAAAA5AAHYGI . You are receiving this because you authored the thread.Message ID: @.***>

sardonicsloth commented 8 months ago

I would also like clarification here. Has anyone gotten the external ipex connector to work?

github-actions[bot] commented 3 months ago

This issue is stale because it has been open for 30 days with no activity.

JohnSkillman commented 3 months ago

Still need info on this issue... Im having the same problem

github-actions[bot] commented 2 months ago

This issue is stale because it has been open for 30 days with no activity.

github-actions[bot] commented 1 month ago

This issue was closed because it has been inactive for 14 days since being marked as stale.