Eagle library - Githubissues

Xinyuan-LilyGO / TTGO-T-Display

MIT License

1.05k stars 337 forks source link

Open mhannebert opened 4 years ago

mhannebert commented 4 years ago

Did anyone create the library for use of this board in an Eagle project?

If not, I'm going to do it and share ;)

flyandi commented 4 years ago

I made one a while ago. Attached. Also added as PR.

flyandi commented 4 years ago

This footprint has been tested in a real PCB btw. So it works.

mhannebert commented 4 years ago

Thanks @flyandi I may work a little on it - and will post it back here

May I ask? How did you power up the device? 3.3V on one of the 3V3 pins?

flyandi commented 4 years ago

Through the USB-C connector or the battery connector on the backside.

mhannebert commented 4 years ago

Here is the library I created based on flyandi's. I did not tested it yet but I'm pretty sure that it is correct.

Would be nice to put a message if you used it.

flyandi commented 4 years ago

Nice work. I will be updating my lib with this as well.

joanbono commented 4 years ago

Just for the record, I used SnapEDA to convert the library from Eagle to KiCAD.

Thanks a lot guys (@flyandi @mhannebert )!

Attached: