search

Ylianst / MeshCentral

A complete web-based remote monitoring and management web site. Once setup you can install agents and perform remote desktop session to devices on the local network or over the Internet.
https://meshcentral.com
Apache License 2.0
3.96k stars 536 forks source link

CIRA connection is established but the SUT doesn't pop-up on MeshCentral #704

Open LopinKuo opened 4 years ago

LopinKuo commented 4 years ago

Hi MeshCentral team,

I get an issue that the SUT is on CIRA connection but it doesn't pop-up on MeshCentral devices list. The MeshCentral version is 0.4.5-f and the SUT is Comet Lake-S platform with ME14.0.30.1002. meshcentral

The duplicated processes are described as below. 1.Use MeshCentralInstaller-2.2.exe to install MeshCentral on console. 2.Launch MeshCentral and add the SUT that has been SMB provisioned on MeshCentral devices list. AMT

  1. Download the Setup CIRA Mesh Script. installCira

4.Install CIRA on SUT through running Mesh Script on MeshCommander. Commander

5.Launch IMSS on SUT and check the CIRA connection is established. SUT

6.After that, the MeshCommander would disconnect but the SUT doesn't appear on MeshCentral. CIRA_Provision

Please help to confirm if it is an issue. Or did I do anything wrong ?

Thank you. Lopin

Ylianst commented 4 years ago

Thanks for the report. I will look into this. It looks like you are using Intel AMT v14, this is a early firmware. Can you confirm that you see the same behavior on Intel AMT v12 or earlier?

LopinKuo commented 4 years ago

Hi Ylianst,

It also happens on the SUT with ME v12.0.32.1421.

Thank you. Lopin

LopinKuo commented 4 years ago

Hi, Any update ?

Thank you. Lopin