search

Ylianst / MeshCommander

MeshCommander is a Intel(R) Active Management Technology (Intel(R) AMT) remote management tool. It's feature rich and includes a built-in remote desktop viewer for Hardware-KVM, a Serial-over-LAN terminal, IDER-Redirection support and much more. MeshCommander is built on web technologies and runs on many plaforms. In addition to being available as a stand-alone tool, MeshCommander was built to be very space efficient to that it can be uploaded into Intel AMT flash space to have it served diretly from the Intel AMT web serve.
Apache License 2.0
368 stars 80 forks source link

Unable to access AMT even though it is activated #102

Closed unmesh59 closed 2 months ago

unmesh59 commented 2 months ago

I bought a HP Mini PC and activated AMT just as I have with other HP and Lenovo mini PCs. However, MeshCommander won't show it on a scan even though I can SSH to the relevant IP. MeshCommander can also connect to the previously scanned PCs.

This PC runs ProxMox so I downloaded the Linux version of meshcmd which seems to indicate AMT is activated. The output seems similar to that on the machines that can connect though I have a mix of AMT v9/v11/v12

root@pve2:~# ./meshcmd amtinfo DHCP error, interface (eno1) not found Intel AMT v12.0.94, activated in Admin Control Mode (ACM). Wired Enabled, DHCP, 6C:0B:84:E0:C4:AD, 192.168.1.55 Wireless Disabled, DHCP, 00:00:00:00:00:00 Connection Status: Direct, CIRA: Disconnected.

Trying to connect with a browser to http://192.168.1.55:16992/logon.htm gives me a "Refused to connect" message

I also installed MeshCentral on one of the servers and it too can see the other PCs but not this one.

What am I doing wrong?

unmesh59 commented 2 months ago

I disabled AMT, rebooted, re-enabled and re-configured it the way I had done before and now MeshCommander sees it during a scan!