Open robclay opened 3 years ago
My end goal is to create a batch file that will:
Should I be using command line arguments for Mesh Central Router instead of MeshCmd?
We did this but couldn't quite automate it. We basically made a connector to a single device over a specific port using the mesh router app. Then we copied the mesh router, the config router file, and rdp to 127.0.0.1:(port) to each device, double click on the config router file, login and then double click on the RDP. We did a walk through of it here, see if it helps.
https://docs.level5mgmt.net/shared_article/31RA3tMagDT5W49ACQSWrrks
Sincerely,
[cid:f7e525ba-21db-48e4-b38b-e0764ae2fa17.jpg] Ben Filippelli CTO Level5 Management p: 561.509.2077 x 311 a: 455 NW 35th St, Boca Raton, FL w: www.level5mgmt.comhttp://www.level5mgmt.com/ e: ben@level5mgmt.com<mailto:%7BE-mail%7D> [cid:079_sm_fb_d4769f35-474f-4861-a58e-099aa5cfa8d3.png]https://www.facebook.com/level5mgmt [cid:079_sm_in_d8061d26-6e17-45d8-b821-e3b73de5d846.png] https://www.linkedin.com/company/level5mgmt [cid:079_sm_twitter_73f8f4e9-8864-400f-9100-349a7b839898.png] https://www.twitter.com/level5mgmt
Our Success is built on referrals from satisfied clients. Click herehttps://www.level5mgmt.com/referralprogram to get up to $500 per referral!
From: robclay notifications@github.com Sent: Sunday, February 14, 2021 3:07 PM To: Ylianst/MeshCommander MeshCommander@noreply.github.com Cc: Subscribed subscribed@noreply.github.com Subject: Re: [Ylianst/MeshCommander] Invalid Username or Password (#44)
My end goal is to create a batch file that will:
Should I be using command line arguments for Mesh Central Router instead of MeshCmd?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FYlianst%2FMeshCommander%2Fissues%2F44%23issuecomment-778834222&data=04%7C01%7Cben%40level5mgmt.com%7C5994dac18b20425c52c208d8d1243aa5%7Cb1363c7f169d4a6281b348e96961b966%7C0%7C0%7C637489300824814876%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=HhIOkNOXlJlfo7n0bgWSerB7oW9dWlFPFVcNOJtpXnw%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAJIW3PEYFLMLIWVE6GCRC6TS7AUR3ANCNFSM4XTRSA3Q&data=04%7C01%7Cben%40level5mgmt.com%7C5994dac18b20425c52c208d8d1243aa5%7Cb1363c7f169d4a6281b348e96961b966%7C0%7C0%7C637489300824824870%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=uXYzqKPZjg5d21a5KdG0sbIZ7A5CsjTQw98hk3M5XD8%3D&reserved=0.
Thank you Ben, if MeshCmd doesn't work, I may try that. Do you know if we can start MeshRouter from the command line using a batch file? - And those are great instructions, by the way!
What you can do is call the .mcrouter saved file which should pop up the router app and present login credentials.
the key is to pre-make the connector otherwise the ports are randomized.
Sincerely,
[cid:f7e525ba-21db-48e4-b38b-e0764ae2fa17.jpg] Ben Filippelli CTO Level5 Management p: 561.509.2077 x 311 a: 455 NW 35th St, Boca Raton, FL w: www.level5mgmt.comhttp://www.level5mgmt.com/ e: ben@level5mgmt.com<mailto:%7BE-mail%7D> [cid:079_sm_fb_d4769f35-474f-4861-a58e-099aa5cfa8d3.png]https://www.facebook.com/level5mgmt [cid:079_sm_in_d8061d26-6e17-45d8-b821-e3b73de5d846.png] https://www.linkedin.com/company/level5mgmt [cid:079_sm_twitter_73f8f4e9-8864-400f-9100-349a7b839898.png] https://www.twitter.com/level5mgmt
Our Success is built on referrals from satisfied clients. Click herehttps://www.level5mgmt.com/referralprogram to get up to $500 per referral!
From: robclay notifications@github.com Sent: Sunday, February 14, 2021 10:26 PM To: Ylianst/MeshCommander MeshCommander@noreply.github.com Cc: Ben Filippelli ben@level5mgmt.com; Comment comment@noreply.github.com Subject: Re: [Ylianst/MeshCommander] Invalid Username or Password (#44)
Thank you Ben, if MeshCmd doesn't work, I may try that. Do you know if we can start MeshRouter from the command line using a batch file?
— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FYlianst%2FMeshCommander%2Fissues%2F44%23issuecomment-778914184&data=04%7C01%7Cben%40level5mgmt.com%7Ce4b51761af5145210f4608d8d16189e2%7Cb1363c7f169d4a6281b348e96961b966%7C0%7C0%7C637489564152848779%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=tkQ4b2NzB16CNq427YcrFxtU7SfDsWdiTLh0xbfAjNc%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAJIW3PF7UD6XFZGDCHJOUG3S7CH7RANCNFSM4XTRSA3Q&data=04%7C01%7Cben%40level5mgmt.com%7Ce4b51761af5145210f4608d8d16189e2%7Cb1363c7f169d4a6281b348e96961b966%7C0%7C0%7C637489564152848779%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=XW285edtFY0mW2thzCJ7dnGoDo7sqSIU5%2BNqmeHPn%2BY%3D&reserved=0.
Have you seen this: https://github.com/ryanblenis/MeshCentral-RoutePlus ?
Seems this may solve a part of it!
Today I have tried to better understand (and use) MeshCommander. I just uploaded my MC server to 0.7.68.
I followed the instructions in MeshCmd User's Guide. I edited my meshaction.txt to include my Password. When I run meshcmd, I get "Invalid username or password." I then removed the password from the txt file, and tried to pass the pass on command line, and get the same issue.
I note that the action file has: wss://www.REDACTED.com:443/meshrelay.ashx
Does this mean I should be able to go to a and web browser and type www.REDACTED.com:443? When I do, I get a Connection Reset in my Firefox browser.
Any help in debugging would be most appreciated!
(I did set debug level 1, but it didn't identify any issue that I can tell)
Note that MeshCentral Router works just fine (and is amazing!)