Open EricVdB opened 3 years ago
Hi, other user got a same problem. https://github.com/Yogui79/IntexPureSpa/discussions/7
Another question : Using a ESP32 V4 dev model ?
"If I understood the code well, the fast blinking should happen after you set the channel and the led goes back off, right? (DO_SET = LOW at line 134 in SearchChannel.ino)" No, Light turn ON in setting channel and turn OFF because not rceived data.
Try use correct board and review conections!
Don't have a v4 board available, so I tried with a Arduino, still same result, the fast blinking never happens. I attached my scope on the solderings and connections are good. I can decode the HEX on the serial line.
Any other ideas?
hello @EricVdB
please post the serial connection logger
I have the same issue, I have a hot tub thats not one of the confirmed models thought. All other hardware is the same as whats listed. I have model 28441E the 6 person. I have run through the channel search about 10 times, at varying distance from the pump and from the controller. Still no fast blinks. Not sure what I'm missing, I really hope I don't have a newer model that isn't compatible with this...
Hi, other user got a same problem. https://github.com/Yogui79/IntexPureSpa/discussions/7
Another question : Using a ESP32 V4 dev model ?
"If I understood the code well, the fast blinking should happen after you set the channel and the led goes back off, right? (DO_SET = LOW at line 134 in SearchChannel.ino)" No, Light turn ON in setting channel and turn OFF because not rceived data.
Try use correct board and review conections!
Shoot.... so I guess my version is the 2021 model. Any hope of getting that one to work with this? Is there anything I can do to help? I do that two of them because of an RMA.
@bendig It is easy to check the Spa version. See the screenshot. Do you have 2021. Is WiFi default than can you use the INTEX APP.
https://ibb.co/LZPTPRZ (Version 2020)
https://ibb.co/b6kX9Sk (Version 2021 - with WIFI symbol in the left corner)
We haven't tried to works with the 2021, I think it's possible.
Please see how @djgel already posted that the ESP is the v4 developer version.
I also have a model from 2021. Before that I had the old one without WiFi. I couldn't find the channel either. However, I noticed that the small blue LED behind the display flashed faster in the old pool. I pressed the lock button to search for a channel. Then you can see the blue LED flashing behind the display. Then the LC12 also flashed at 0x2b.
Hi,
first of all this looks really awesome, it would finally allow me to integrate the SPA into our home automation using OpenHab.
But I can't get the channel search to work. It keeps on blinking steady and never blinks fast. I tried close to the SPA pump (like 5cm away), 1 meter further away, no joy.
If I understood the code well, the fast blinking should happen after you set the channel and the led goes back off, right? (DO_SET = LOW at line 134 in SearchChannel.ino)
Is there anything else i can try?
Model of the SPA = 28442 (bought in belgium)
Kind regards, Eric