search

Ysurac / openmptcprouter

OpenMPTCProuter is an open source solution to aggregate multiple internet connections using Multipath TCP (MPTCP) on OpenWrt
https://www.openmptcprouter.com/
GNU General Public License v3.0
1.85k stars 266 forks source link

Problem of perf #1158

Closed vinceducat closed 3 years ago

vinceducat commented 4 years ago

Expected Behavior

have aggregation flow rate egal to sum of each flow 275 mb/s https://pic.nperf.com/r/3272421640973452-gjN3eSVk.png

Current Behavior

rate only half of the sum 77 mb/s https://pic.nperf.com/r/3272422147777817-zJoPjkvV.png

Possible Solution

want to have opinion about perf

Steps to Reproduce the Problem

Context (Environment)

Ysurac commented 4 years ago

How many connections do you have ? what is the speed of each connection ? Did you test with omr-test-speed and omr-test-speed wan1 via SSH on the router ? And what is the platform ? What is the VPS ?

vinceducat commented 4 years ago

x86_64 for platform

I have 2 connection adsl wan 1 direct speed without pass trought vps 1000k/s 4g wan 2 direct test without pass trought vps 350mb/s

test trought vps ans omr-test-speed omr-test-speed 10M omr-test-speed wan 2 1800k => strange :-(

change today from milkywan bidouille to perf1 so from 1vcpu 1go ram to 2 vcpu 2 go ram

Ysurac commented 4 years ago

So you seems to have a problem with wan2. omr-test-speed only download a file from OVH, directly when an interface is specified. It's a dedicated ethernet card with an ethernet router or an USB LTE dongle ?

vinceducat commented 4 years ago

its dedicated ethernet card with internet router huawei b825 in ethernet

Ysurac commented 4 years ago

Check cables, try to plug it on wan1,... Check kernel and system log of OpenMPTCProuter in state menu, maybe a problem with this connection is detected.

vinceducat commented 4 years ago

its not a problem of cable.. all test are made trought the same hardware, the only difference is passing throught or not the vps... but allways test pass trought OMR ...

it seems than my VPS is 100% load on the two vCPU in the milkywan perf1 vps... i ever change from bidouille to perf1 ... no more best perff :-(

Ysurac commented 4 years ago

With omr-test-speed wan2 this doesn't use the VPS at all. For the CPU load, check that AES is disabled on advanced checkbox in the OpenMPTCProuter wizard, milkywan VPS doesn't seems to support AES. You can also disable encryption for testing at least. And with htop (apt-get install htop) on the VPS you can check CPU load and what is using it.

vinceducat commented 4 years ago

i have chacha20 in the in the encryption.... must i disable it ?

Ysurac commented 4 years ago

To test if it's encryption that use all the CPU and so make everything slow: yes

vinceducat commented 4 years ago

does i have to reboot beetween each change ?

Ysurac commented 4 years ago

No, only validate the wizard.

vinceducat commented 4 years ago

root@OpenMPTCProuter:~# omr-test-speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 11 10.0G 11 1227M 0 0 17.3M 0 0:09:49 0:01:10 0:08:39 13.9M^C root@OpenMPTCProuter:~# omr-test-speed wan1 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 10.0G 0 74.7M 0 0 1045k 0 2:47:11 0:01:13 2:45:58 1084k^C root@OpenMPTCProuter:~# omr-test-speed wan2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 2 10.0G 2 293M 0 0 4661k 0 0:37:29 0:01:04 0:36:25 2830k^C

strange result here with chacha20 activated ... beetwen 77 and 100 % load during omr-test-speed

oot@OpenMPTCProuter:~# omr-test-speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 7 10.0G 7 760M 0 0 11.2M 0 0:15:07 0:01:07 0:14:00 11.1M^C root@OpenMPTCProuter:~# omr-test-speed wan1 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 10.0G 0 4465k 0 0 1052k 0 2:46:03 0:00:04 2:45:59 1052k^C root@OpenMPTCProuter:~# omr-test-speed wan2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 3 10.0G 3 330M 0 0 4848k 0 0:36:02 0:01:09 0:34:53 3430k^C

not encryotion same test and load between 75/85% ...

Ysurac commented 4 years ago

So about 8Mb/s and 27Mb/s when encryption is disabled. Still not really good. And still high CPU usage. Did you try with htop to check what is using so much CPU ? What is the load on the VPS when it is idle ?

vinceducat commented 4 years ago

idle 2/5% ...

during omr-test-speed on the vps the first process loading cpu is ss-manager ... shadowsocks...

Ysurac commented 4 years ago

ss-server I think ? Obfuscation wasn't enabled ? If it's not the case, then, with encryption already disabled, only a better CPU can increase speed here I think.

vinceducat commented 4 years ago

yes its ss-server...

Hugues from milkywan just now give me a vps which support aes-ni what was the best encryption type. ?

resultat of rate are really better :-)

Ysurac commented 4 years ago

Yes, I asked to him why AES was not activated and he moved your VPS on a host with AES. Check in the wizard that AES-256-GCM is really used. Rate shouldn't improve as encryption was disabled, but host CPU can be better too :)

vinceducat commented 4 years ago

thanks ;-)

aes-256-gcm enable in the wizard ;-)

vinceducat commented 4 years ago

final result : https://www.nperf.com/r/3272782210043405-yjd7VOUF => this is in directoutput via 4G routeur => 300Mb/s

https://www.nperf.com/r/3272783176944345-aYzmV3KD and and trought vps => 127Mb/s

already change my intial vps from milkywan bidouile 1vCPU 1Go ram to Perf 1 2vCPU 2Go Ram with AES-NI

@Ysurac do you think it is normal less rate when i use vps... the standard ratio direct/vps seems to be 3:1 ? is it normal perf for you ?

Ysurac commented 4 years ago

No. There is something that limit the speed. Can be the VPS, your router arch, a 100Mb/s port limit,...

vinceducat commented 4 years ago

My OMR hardware Packard Bell EasyNote LJ65 Pentium(R) Dual-Core CPU T4400 @ 2.20GHz openmptcprouter v0.55.1 r0+14022-18b7d87a8f / LuCI Master git-20.215.65300-c4b617a 5.4.52

vinceducat commented 4 years ago

and kernel log 0.000000] Linux version 5.4.52 (circleci@default-386e6878-a0fc-406e-9c06-bb09c71aa8d2) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r0+14022-18b7d87a8f)) #0 SMP Mon Aug 3 08:47:22 2020 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=bdbb3754-02 rootwait console=tty0 noinitrd [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd6efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfd6f000-0x00000000bfdbefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfe81fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfe82000-0x00000000bfebefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfebf000-0x00000000bfee9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfeea000-0x00000000bfefefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfeff000-0x00000000bfefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Packard Bell EasyNote LJ65 /EasyNote LJ65 , BIOS V2.14 12/09/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.635 MHz processor [ 0.003794] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003796] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.003804] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.003810] MTRR default type: uncachable [ 0.003810] MTRR fixed ranges enabled: [ 0.003812] 00000-9FFFF write-back [ 0.003813] A0000-BFFFF uncachable [ 0.003814] C0000-DFFFF write-protect [ 0.003815] E0000-EFFFF uncachable [ 0.003815] F0000-FFFFF write-protect [ 0.003816] MTRR variable ranges enabled: [ 0.003818] 0 base 0FFF00000 mask FFFF00000 write-protect [ 0.003819] 1 base 0FFFC0000 mask FFFFE0000 uncachable [ 0.003820] 2 base 000000000 mask F80000000 write-back [ 0.003822] 3 base 080000000 mask FC0000000 write-back [ 0.003823] 4 base 0BFF00000 mask FFFF00000 uncachable [ 0.003824] 5 base 100000000 mask F00000000 write-back [ 0.003825] 6 base 200000000 mask FC0000000 write-back [ 0.003826] 7 disabled [ 0.004457] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.004803] last_pfn = 0xbff00 max_arch_pfn = 0x400000000 [ 0.017113] ACPI: Early table checksum verification disabled [ 0.017119] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.017124] ACPI: XSDT 0x00000000BFEFE120 000064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.017131] ACPI: FACP 0x00000000BFEFD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.017139] ACPI: DSDT 0x00000000BFEEC000 00BB87 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.017143] ACPI: FACS 0x00000000BFE8F000 000040 [ 0.017147] ACPI: FACS 0x00000000BFE8F000 000040 [ 0.017150] ACPI: HPET 0x00000000BFEFC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.017155] ACPI: APIC 0x00000000BFEFB000 00006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.017159] ACPI: MCFG 0x00000000BFEFA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.017164] ACPI: ASF! 0x00000000BFEF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.017168] ACPI: SLIC 0x00000000BFEF8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.017172] ACPI: BOOT 0x00000000BFEEB000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.017176] ACPI: SSDT 0x00000000BFEEA000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.017189] ACPI: Local APIC address 0xfee00000 [ 0.017912] Zone ranges: [ 0.017917] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017919] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017921] Normal [mem 0x0000000100000000-0x000000023fffffff] [ 0.017923] Movable zone start for each node [ 0.017924] Early memory node ranges [ 0.017925] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.017927] node 0: [mem 0x0000000000100000-0x00000000bfd6efff] [ 0.017929] node 0: [mem 0x00000000bfdbf000-0x00000000bfe81fff] [ 0.017931] node 0: [mem 0x00000000bfebf000-0x00000000bfee9fff] [ 0.017932] node 0: [mem 0x00000000bfeff000-0x00000000bfefffff] [ 0.017934] node 0: [mem 0x0000000100000000-0x000000023fffffff] [ 0.017960] Zeroed struct page in unavailable ranges: 517 pages [ 0.017962] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff] [ 0.017965] On node 0 totalpages: 2096635 [ 0.017967] DMA zone: 64 pages used for memmap [ 0.017968] DMA zone: 21 pages reserved [ 0.017969] DMA zone: 3997 pages, LIFO batch:0 [ 0.018133] DMA32 zone: 12218 pages used for memmap [ 0.018134] DMA32 zone: 781918 pages, LIFO batch:63 [ 0.051379] Normal zone: 20480 pages used for memmap [ 0.051381] Normal zone: 1310720 pages, LIFO batch:63 [ 0.104917] ACPI: PM-Timer IO Port: 0x408 [ 0.104920] ACPI: Local APIC address 0xfee00000 [ 0.104939] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.104943] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.104946] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.104949] ACPI: IRQ0 used by override. [ 0.104950] ACPI: IRQ9 used by override. [ 0.104952] Using ACPI (MADT) for SMP configuration information [ 0.104954] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.104960] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.104987] [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.104989] Booting paravirtualized kernel on bare hardware [ 0.104993] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.105001] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.106312] percpu: Embedded 42 pages/cpu s133208 r8192 d30632 u524288 [ 0.106321] pcpu-alloc: s133208 r8192 d30632 u524288 alloc=1*2097152 [ 0.106322] pcpu-alloc: [0] 0 1 2 3 [ 0.106350] Built 1 zonelists, mobility grouping on. Total pages: 2063852 [ 0.106353] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=bdbb3754-02 rootwait console=tty0 noinitrd [ 0.110286] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.112247] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.112319] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.223504] Memory: 8153880K/8386540K available (12290K kernel code, 605K rwdata, 2964K rodata, 1100K init, 2288K bss, 232660K reserved, 0K cma-reserved) [ 0.223591] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.223602] Kernel/User page tables isolation: enabled [ 0.223706] rcu: Hierarchical RCU implementation. [ 0.223708] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.223710] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.223712] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.223714] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.223728] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.223987] random: get_random_bytes called from start_kernel+0x2eb/0x576 with crng_init=0 [ 0.227612] Console: colour VGA+ 80x25 [ 0.239464] printk: console [tty0] enabled [ 0.239597] ACPI: Core revision 20190816 [ 0.239856] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.240062] APIC: Switch to symmetric I/O mode setup [ 0.240576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.260060] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa266b007b, max_idle_ns: 440795260493 ns [ 0.260255] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.27 BogoMIPS (lpj=8778540) [ 0.260449] pid_max: default: 32768 minimum: 301 [ 0.260674] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.260930] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.261428] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.261561] process: using mwait in idle threads [ 0.261687] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.261811] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.261937] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.262123] Spectre V2 : Mitigation: Full generic retpoline [ 0.262246] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.262430] Speculative Store Bypass: Vulnerable [ 0.262554] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.262818] Freeing SMP alternatives memory: 36K [ 0.377818] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4400 @ 2.20GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.378176] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.378377] ... version: 2 [ 0.378501] ... bit width: 40 [ 0.378623] ... generic registers: 2 [ 0.378746] ... value mask: 000000ffffffffff [ 0.378870] ... max period: 000000007fffffff [ 0.378994] ... fixed-purpose events: 3 [ 0.379116] ... event mask: 0000000700000003 [ 0.379306] rcu: Hierarchical SRCU implementation. [ 0.379565] smp: Bringing up secondary CPUs ... [ 0.379831] x86: Booting SMP configuration: [ 0.379961] .... node #0, CPUs: #1 [ 0.380312] smp: Brought up 1 node, 2 CPUs [ 0.380568] smpboot: Max logical packages: 2 [ 0.380693] smpboot: Total of 2 processors activated (8778.54 BogoMIPS) [ 0.382125] devtmpfs: initialized [ 0.382608] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.382806] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.382990] pinctrl core: initialized pinctrl subsystem [ 0.383330] NET: Registered protocol family 16 [ 0.384400] cpuidle: using governor ladder [ 0.384592] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.384724] Simple Boot Flag at 0x44 set to 0x1 [ 0.384865] ACPI: bus type PCI registered [ 0.384995] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.385199] PCI: Using configuration type 1 for base access [ 0.394994] cryptd: max_cpu_qlen set to 1000 [ 0.395507] ACPI: Added _OSI(Module Device) [ 0.395507] ACPI: Added _OSI(Processor Device) [ 0.395507] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.395507] ACPI: Added _OSI(Processor Aggregator Device) [ 0.395574] ACPI: Added _OSI(Linux-Dell-Video) [ 0.395697] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.396263] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.401996] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.403378] ACPI: [Firmware Bug]: BIOS OSI(Linux) query ignored [ 0.404264] ACPI: Dynamic OEM Table Load: [ 0.404264] ACPI: SSDT 0xFFFF888236D8E400 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.404982] ACPI: Dynamic OEM Table Load: [ 0.405115] ACPI: SSDT 0xFFFF88823671A800 000537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.406546] ACPI: Dynamic OEM Table Load: [ 0.406546] ACPI: SSDT 0xFFFF888236FA4400 0001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.407863] ACPI: Dynamic OEM Table Load: [ 0.408331] ACPI: SSDT 0xFFFF888236E59780 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.409572] ACPI: EC: EC started [ 0.409572] ACPI: EC: interrupt blocked [ 0.436347] ACPI: _SB.PCI0.LPC.EC0: Used as first EC [ 0.436482] ACPI: _SB.PCI0.LPC.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, ECDATA=0x62 [ 0.436669] ACPI: _SB.PCI0.LPC.EC0: Boot DSDT EC used to handle transactions [ 0.436855] ACPI: Interpreter enabled [ 0.437004] ACPI: (supports S0 S5) [ 0.437135] ACPI: Using IOAPIC for interrupt routing [ 0.437316] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.437815] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.446899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.447040] acpi PNP0A08:00: _OSC: OS supports [Segments MSI HPX-Type3] [ 0.447179] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND) [ 0.447738] PCI host bridge to bus 0000:00 [ 0.447871] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.447999] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.448126] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.448259] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.448452] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.448589] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.448859] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400 [ 0.449043] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.449336] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.449534] pci 0000:00:1a.0: reg 0x20: [io 0x50e0-0x50ff] [ 0.449849] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.450043] pci 0000:00:1a.1: reg 0x20: [io 0x50c0-0x50df] [ 0.450353] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.452068] pci 0000:00:1a.7: reg 0x10: [mem 0xd9304c00-0xd9304fff] [ 0.456695] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.456966] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.457119] pci 0000:00:1b.0: reg 0x10: [mem 0xd9300000-0xd9303fff 64bit] [ 0.457330] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.457589] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.457807] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.458075] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.458293] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.458563] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.458781] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.459056] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.459252] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf] [ 0.459568] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.459751] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f] [ 0.460431] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.460626] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f] [ 0.460940] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 [ 0.461132] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f] [ 0.461429] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.463179] pci 0000:00:1d.7: reg 0x10: [mem 0xd9304800-0xd9304bff] [ 0.467905] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.468394] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.468716] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.469086] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.469240] pci 0000:00:1f.2: reg 0x10: [io 0x5108-0x510f] [ 0.469378] pci 0000:00:1f.2: reg 0x14: [io 0x5114-0x5117] [ 0.469517] pci 0000:00:1f.2: reg 0x18: [io 0x5100-0x5107] [ 0.469655] pci 0000:00:1f.2: reg 0x1c: [io 0x5110-0x5113] [ 0.469794] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 0.469933] pci 0000:00:1f.2: reg 0x24: [mem 0xd9304000-0xd93047ff] [ 0.470114] pci 0000:00:1f.2: PME# supported from D3hot [ 0.470372] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.470524] pci 0000:00:1f.3: reg 0x10: [mem 0xd9305000-0xd93050ff 64bit] [ 0.470678] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 0.470987] pci 0000:01:00.0: [10de:0a74] type 00 class 0x030000 [ 0.471134] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff] [ 0.471277] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.471479] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.471676] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f] [ 0.471812] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.471947] pci 0000:01:00.0: enabling Extended Tags [ 0.472081] pci 0000:01:00.0: Enabling HDA controller [ 0.472333] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link) [ 0.472718] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.472866] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff] [ 0.473060] pci 0000:01:00.1: enabling Extended Tags [ 0.473314] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.473441] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.473569] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff] [ 0.473698] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.473966] acpiphp: Slot [1] registered [ 0.474101] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.474234] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.474363] pci 0000:00:1c.0: bridge window [mem 0xd8300000-0xd92fffff] [ 0.474493] pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref] [ 0.474754] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000 [ 0.474915] pci 0000:04:00.0: reg 0x10: [mem 0xd7200000-0xd720ffff 64bit] [ 0.475174] pci 0000:04:00.0: supports D1 [ 0.475304] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.475507] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.475641] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.475769] pci 0000:00:1c.1: bridge window [mem 0xd7200000-0xd82fffff] [ 0.475900] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref] [ 0.476176] pci 0000:05:00.0: [14e4:1698] type 00 class 0x020000 [ 0.476287] pci 0000:05:00.0: reg 0x10: [mem 0xd6100000-0xd610ffff 64bit] [ 0.476487] pci 0000:05:00.0: enabling Extended Tags [ 0.476695] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.476942] pci 0000:00:1c.2: PCI bridge to [bus 05] [ 0.477076] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.477205] pci 0000:00:1c.2: bridge window [mem 0xd6100000-0xd71fffff] [ 0.477335] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd60fffff 64bit pref] [ 0.477547] pci_bus 0000:06: extended config space not accessible [ 0.477746] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.477888] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.478082] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.478270] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.478458] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.478674] pcibus 0000:00: on NUMA node 0 [ 0.588531] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) [ 0.588739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) [ 0.588939] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) [ 0.589139] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) [ 0.589338] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) 0, disabled. [ 0.589598] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) [ 0.589798] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) [ 0.589997] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) [ 0.590917] ACPI: EC: interrupt unblocked [ 0.591059] ACPI: EC: event unblocked [ 0.591194] ACPI: _SB.PCI0.LPC.EC0: GPE=0x1c, EC_CMD/EC_SC=0x66, ECDATA=0x62 [ 0.591386] ACPI: _SB.PCI0.LPC.EC0: Boot DSDT EC used to handle transactions and events [ 0.591830] SCSI subsystem initialized [ 0.592190] libata version 3.00 loaded. [ 0.592201] ACPI: bus type USB registered [ 0.592290] usbcore: registered new interface driver usbfs [ 0.592435] usbcore: registered new interface driver hub [ 0.592581] usbcore: registered new device driver usb [ 0.592828] PCI: Using ACPI for IRQ routing [ 0.592964] PCI: pci_cache_line_size set to 64 bytes [ 0.593057] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.593060] e820: reserve RAM buffer [mem 0xbfd6f000-0xbfffffff] [ 0.593061] e820: reserve RAM buffer [mem 0xbfe82000-0xbfffffff] [ 0.593062] e820: reserve RAM buffer [mem 0xbfeea000-0xbfffffff] [ 0.593063] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff] [ 0.593349] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.593358] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.593358] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.595785] clocksource: Switched to clocksource tsc-early [ 0.596028] pnp: PnP ACPI init [ 0.701272] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x1fff] [ 0.701549] system 00:00: [io 0x0600-0x060f] has been reserved [ 0.701681] system 00:00: [io 0x0610] has been reserved [ 0.701807] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.701932] system 00:00: [io 0x0810-0x0817] has been reserved [ 0.702058] system 00:00: [io 0x0820-0x0823] has been reserved [ 0.702183] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.702308] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.702433] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.702559] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.702698] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.702824] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.702950] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.703076] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.703202] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.703328] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.703455] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.703589] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.703643] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.703732] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.703833] pnp 00:03: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active) [ 0.703980] pnp: PnP ACPI: found 4 devices [ 0.707361] thermal_sys: Registered thermal governor 'step_wise' [ 0.707363] thermal_sys: Registered thermal governor 'user_space' [ 0.712011] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.712336] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.712558] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref] [ 0.712750] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.712876] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.713004] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff] [ 0.714431] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.714625] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.714751] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.714879] pci 0000:00:1c.0: bridge window [mem 0xd8300000-0xd92fffff] [ 0.715006] pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref] [ 0.715196] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.715327] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.715455] pci 0000:00:1c.1: bridge window [mem 0xd7200000-0xd82fffff] [ 0.715583] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref] [ 0.715771] pci 0000:00:1c.2: PCI bridge to [bus 05] [ 0.715902] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.716030] pci 0000:00:1c.2: bridge window [mem 0xd6100000-0xd71fffff] [ 0.716157] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd60fffff 64bit pref] [ 0.716346] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.716486] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.716617] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.716744] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.716870] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] [ 0.716997] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.717124] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff] [ 0.717249] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.717434] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.717559] pci_bus 0000:02: resource 1 [mem 0xd8300000-0xd92fffff] [ 0.717684] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref] [ 0.717869] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.717993] pci_bus 0000:04: resource 1 [mem 0xd7200000-0xd82fffff] [ 0.718118] pci_bus 0000:04: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref] [ 0.718302] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 0.718427] pci_bus 0000:05: resource 1 [mem 0xd6100000-0xd71fffff] [ 0.718552] pci_bus 0000:05: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref] [ 0.718737] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.718862] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.718988] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.719113] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff window] [ 0.719401] NET: Registered protocol family 2 [ 0.719788] MPTCP tokens hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.720090] MPTCP request tokens hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.720404] default registered [ 0.720532] default registered [ 0.720653] MPTCP: Unstable branch [ 0.720659] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.721008] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.721453] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.722145] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722408] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722612] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722967] NET: Registered protocol family 1 [ 0.741270] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x5f5 took 17033 usecs [ 0.761255] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x5f5 took 18126 usecs [ 0.761486] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.761690] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.761834] PCI: CLS 64 bytes, default 64 [ 0.762069] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.762201] software IO TLB: mapped [mem 0xbbd6f000-0xbfd6f000] (64MB) [ 0.763141] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.766069] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.766579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.767303] pcieport 0000:00:1c.0: enabling device (0001 -> 0003) [ 0.768207] hv_vmbus: registering driver hv_pci [ 0.768353] hv_vmbus: registering driver hyperv_fb [ 0.768493] intel_idle: does not run on family 6 model 23 [ 0.769059] ACPI: AC Adapter [AC] (on-line) [ 0.769362] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input0 [ 0.769596] ACPI: Power Button [PWRB] [ 0.769789] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input1 [ 0.770014] ACPI: Lid Switch [LID0] [ 0.770194] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input2 [ 0.770419] ACPI: Sleep Button [SLPB] [ 0.770631] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.770886] ACPI: Power Button [PWRF] [ 0.771171] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.093133] acpi device:02: registered as cooling_device0 [ 1.093351] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4 [ 1.093763] Monitor-Mwait will be used to enter C-1 state [ 1.093769] Monitor-Mwait will be used to enter C-2 state [ 1.093774] tsc: Marking TSC unstable due to TSC halts in idle [ 1.094243] clocksource: Switched to clocksource hpet [ 1.095597] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.095818] ACPI: Thermal Zone [TZ01] (66 C) [ 1.096134] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 1.097624] Non-volatile memory driver v1.3 [ 1.097902] Linux agpgart interface v0.103 [ 1.099920] loop: module loaded [ 1.100113] Guest personality initialized and is inactive [ 1.100297] VMCI host device registered (name=vmci, major=10, minor=63) [ 1.100430] Initialized host personality [ 1.100659] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20190816/utaddress-213) [ 1.100921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.101111] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20190816/utaddress-213) [ 1.101372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.101559] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20190816/utaddress-213) [ 1.101811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.101999] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.102171] Loading iSCSI transport class v2.0-870. [ 1.102673] VMware PVSCSI driver - version 1.0.7.0-k [ 1.102840] hv_vmbus: registering driver hv_storvsc [ 1.103303] ahci 0000:00:1f.2: version 3.0 [ 1.103628] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.103793] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.103985] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs [ 1.140954] scsi host0: ahci [ 1.141285] scsi host1: ahci [ 1.141565] scsi host2: ahci [ 1.141831] scsi host3: ahci [ 1.142110] scsi host4: ahci [ 1.142383] scsi host5: ahci [ 1.142594] ata1: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304100 irq 28 [ 1.142785] ata2: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304180 irq 28 [ 1.142968] ata3: DUMMY [ 1.143088] ata4: DUMMY [ 1.143209] ata5: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304300 irq 28 [ 1.143393] ata6: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304380 irq 28 [ 1.143808] VMware vmxnet3 virtual NIC driver - version 1.4.17.0-k-NAPI [ 1.143977] hv_vmbus: registering driver hv_netvsc [ 1.144113] Fusion MPT base driver 3.04.20 [ 1.144235] Copyright (c) 1999-2008 LSI Corporation [ 1.144383] Fusion MPT SPI Host driver 3.04.20 [ 1.144545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.144685] ehci-pci: EHCI PCI platform driver [ 1.145089] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.145228] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.145432] ehci-pci 0000:00:1a.7: debug port 1 [ 1.149470] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.149618] ehci-pci 0000:00:1a.7: irq 21, io mem 0xd9304c00 [ 1.168308] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.168707] hub 1-0:1.0: USB hub found [ 1.168859] hub 1-0:1.0: 4 ports detected [ 1.169492] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.169630] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.169831] ehci-pci 0000:00:1d.7: debug port 1 [ 1.173854] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.173999] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd9304800 [ 1.188308] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.188689] hub 2-0:1.0: USB hub found [ 1.188839] hub 2-0:1.0: 8 ports detected [ 1.189365] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.189508] ohci-pci: OHCI PCI platform driver [ 1.189657] ohci-platform: OHCI generic platform driver [ 1.189812] uhci_hcd: USB Universal Host Controller Interface driver [ 1.190167] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.190303] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.190529] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050e0 [ 1.190882] hub 3-0:1.0: USB hub found [ 1.192338] hub 3-0:1.0: 2 ports detected [ 1.192900] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.193039] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.193268] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0 [ 1.193635] hub 4-0:1.0: USB hub found [ 1.193778] hub 4-0:1.0: 2 ports detected [ 1.194317] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.194456] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.194674] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0 [ 1.195045] hub 5-0:1.0: USB hub found [ 1.195192] hub 5-0:1.0: 2 ports detected [ 1.195715] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.195853] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.196079] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080 [ 1.196466] hub 6-0:1.0: USB hub found [ 1.196608] hub 6-0:1.0: 2 ports detected [ 1.197132] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.197270] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.197486] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005060 [ 1.197845] hub 7-0:1.0: USB hub found [ 1.197990] hub 7-0:1.0: 2 ports detected [ 1.198507] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.198644] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 1.198878] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040 [ 1.199248] hub 8-0:1.0: USB hub found [ 1.199390] hub 8-0:1.0: 2 ports detected [ 1.199819] usbcore: registered new interface driver usb-storage [ 1.200002] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 1.261426] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.261560] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.261700] hv_vmbus: registering driver hyperv_keyboard [ 1.261880] rtc_cmos 00:01: RTC can wake from S4 [ 1.262293] rtc_cmos 00:01: registered as rtc0 [ 1.262428] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.270046] battery: ACPI: Battery Slot [BAT0] (battery absent) [ 1.270432] intel_pstate: CPU model not supported [ 1.270582] sdhci: Secure Digital Host Controller Interface driver [ 1.270714] sdhci: Copyright(c) Pierre Ossman [ 1.271183] hidraw: raw HID events driver (C) Jiri Kosina [ 1.271331] hv_vmbus: registering driver hid_hyperv [ 1.271486] usbcore: registered new interface driver usbhid [ 1.271617] usbhid: USB HID core driver [ 1.271748] hv_utils: Registering HyperV Utility Driver [ 1.271879] hv_vmbus: registering driver hv_utils [ 1.272003] hv_vmbus: registering driver hv_balloon [ 1.272396] NET: Registered protocol family 10 [ 1.273200] Segment Routing with IPv6 [ 1.273365] fullmesh registered [ 1.273492] ndiffports registered [ 1.273616] binder registered [ 1.273747] netlink registered [ 1.273874] roundrobin registered [ 1.273995] redundant registered [ 1.274116] blest registered [ 1.274237] ecf registered [ 1.274359] NET: Registered protocol family 17 [ 1.274495] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.274689] 8021q: 802.1Q VLAN Support v1.8 [ 1.274899] NET: Registered protocol family 40 [ 1.275246] microcode: sig=0x1067a, pf=0x80, revision=0xa07 [ 1.275426] microcode: Microcode Update Driver: v2.2. [ 1.275431] IPI shorthand broadcast: enabled [ 1.275749] registered taskstats version 1 [ 1.276181] rtc_cmos 00:01: setting system clock to 2020-08-20T19:15:51 UTC (1597950951) [ 1.322989] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.458713] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.504928] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133 [ 1.505067] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.507051] ata1.00: configured for UDMA/133 [ 1.507417] scsi 0:0:0:0: Direct-Access ATA ST9500325AS SDM1 PQ: 0 ANSI: 5 [ 1.508290] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.508534] sd 0:0:0:0: [sda] Write Protect is off [ 1.508674] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.508736] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.517744] sda: sda1 sda2 [ 1.518353] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.524283] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.732268] random: fast init done [ 1.822605] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.824582] ata2.00: ATAPI: Optiarc DVD RW AD-7585H, KX04, max UDMA/100 [ 1.825406] ata2.00: configured for UDMA/100 [ 1.828753] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7585H KX04 PQ: 0 ANSI: 5 [ 1.889701] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.889903] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.890243] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.202614] ata5: SATA link down (SStatus 0 SControl 300) [ 2.514972] ata6: SATA link down (SStatus 0 SControl 300) [ 2.515152] Waiting for root device PARTUUID=bdbb3754-02... [ 6.736277] usb 2-1: device descriptor read/64, error -110 [ 7.001510] usb-storage 2-1:1.0: USB Mass Storage device detected [ 7.001804] scsi host6: usb-storage 2-1:1.0 [ 7.128277] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 8.016998] scsi 6:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2 [ 8.018086] sd 6:0:0:0: [sdb] 7866368 512-byte logical blocks: (4.03 GB/3.75 GiB) [ 8.018964] sd 6:0:0:0: [sdb] Write Protect is off [ 8.019104] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 8.019727] sd 6:0:0:0: [sdb] No Caching mode page found [ 8.019867] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8.073234] sdb: sdb1 sdb2 [ 8.076078] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 8.101887] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 8.102115] VFS: Mounted root (ext4 filesystem) readonly on device 8:18. [ 8.102986] devtmpfs: mounted [ 8.104155] Freeing unused kernel image memory: 1100K [ 8.116287] Write protecting the kernel read-only data: 18432k [ 8.117764] Freeing unused kernel image memory: 2016K [ 8.118662] Freeing unused kernel image memory: 1132K [ 8.118849] Run /sbin/init as init process [ 8.211175] init: Console is alive [ 8.966848] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 8.981372] pps_core: LinuxPPS API ver. 1 registered [ 8.981519] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 8.986100] PTP clock support registered [ 8.991579] tg3.c:v3.137 (May 11, 2014) [ 9.012340] tg3 0000:05:00.0 eth0: Tigon3 [partno(none) rev 5784100] (PCI Express) MAC address 70:5a:b6:3f:76:0b [ 9.012554] tg3 0000:05:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 9.012756] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 9.012955] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 9.015917] Button Hotplug driver version 0.4.1 [ 9.019370] ehci-fsl: Freescale EHCI Host controller driver [ 9.019889] ehci-platform: EHCI generic platform driver [ 9.025519] sdhci-pltfm: SDHCI platform and OF driver helper [ 9.025734] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 9.028219] init: - preinit - [ 9.529535] random: jshn: uninitialized urandom read (4 bytes read) [ 9.538568] random: jshn: uninitialized urandom read (4 bytes read) [ 9.541727] random: jshn: uninitialized urandom read (4 bytes read) [ 13.306872] tg3 0000:05:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 13.307019] tg3 0000:05:00.0 eth0: Flow control is on for TX and on for RX [ 13.307175] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.747646] mount_root: mounting /dev/root [ 13.749322] EXT4-fs (sdb2): re-mounted. Opts: (null) [ 13.749527] mount_root: loading kmods from internal overlay [ 13.762515] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 13.763095] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 13.849049] random: crng init done [ 13.849199] random: 4 urandom warning(s) missed due to ratelimiting [ 14.165494] block: attempting to load /etc/config/fstab [ 14.166858] block: extroot: not configured [ 14.333511] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null) [ 14.366348] F2FS-fs (sda1): Magic Mismatch, valid(0xf2f52010) - read(0xc0856600) [ 14.366547] F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock [ 14.366968] F2FS-fs (sda1): Magic Mismatch, valid(0xf2f52010) - read(0x0) [ 14.367104] F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock [ 14.525777] urandom-seed: Seeding with /etc/urandom.seed [ 14.554593] procd: - early - [ 15.082227] procd: - ubus - [ 15.132187] procd: - init - [ 15.195480] urngd: v1.0.2 started. [ 15.350003] kmodloader: loading kernel modules from /etc/modules.d/* [ 15.388623] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 15.388623] originally by Donald Becker becker@scyld.com [ 15.388623] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 15.390775] zram: Added device: zram0 [ 15.394989] NET: Registered protocol family 8 [ 15.395125] NET: Registered protocol family 20 [ 15.400298] NET: Registered protocol family 15 [ 15.401121] Initializing XFRM netlink socket [ 15.403559] Modular ISDN core version 1.1.29 [ 15.403785] NET: Registered protocol family 34 [ 15.404429] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 15.404780] 0 virtual devices registered [ 15.405526] DSP module 2.0 [ 15.405669] mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies. [ 15.408425] tun: Universal TUN/TAP device driver, 1.6 [ 15.411306] mISDN: HFC-multi driver 2.03 [ 15.429433] sctp: Hash tables configured (bind 256/256) [ 15.430878] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 15.434906] nat46: module (version ac712ad2bedf107329285af1909310675afe872d) loaded. [ 15.437529] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 15.437676] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 15.439577] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 15.439724] igb: Copyright (c) 2007-2014 Intel Corporation. [ 15.442736] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 15.442935] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 15.445025] gre: GRE over IPv4 demultiplexor driver [ 15.445710] ip_gre: GRE over IPv4 tunneling driver [ 15.447798] ip6_gre: GRE over IPv6 tunneling driver [ 15.471435] i2c /dev entries driver [ 15.478250] Mirror/redirect action on [ 15.480610] u32 classifier [ 15.480749] input device check on [ 15.480871] Actions configured [ 15.483825] GACT probability on [ 15.485265] Simple TC action Loaded [ 15.493302] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 15.580962] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 15.581105] Copyright (c) 2007 Atheros Corporation. [ 15.582230] usbcore: registered new interface driver cdc_acm [ 15.582374] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 15.582952] usbcore: registered new interface driver cdc_wdm [ 15.583333] Loading modules backported from Linux version v5.8-rc2-0-g48778464bb7d [ 15.583533] Backport generated by backports.git v5.8-rc2-1-0-g7a69429b [ 15.587858] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 15.588004] e100: Copyright(c) 1999-2006 Intel Corporation [ 15.589409] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 15.589554] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 15.595386] hso: drivers/net/usb/hso.c: Option Wireless [ 15.595585] usbcore: registered new interface driver hso [ 15.597505] usbcore: registered new interface driver ipheth [ 15.599476] usbcore: registered new interface driver kaweth [ 15.601330] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 15.632459] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 15.633278] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 15.633534] usbcore: registered new interface driver pegasus [ 15.635509] usbcore: registered new interface driver r8152 [ 15.638246] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 15.639022] usbcore: registered new interface driver r8712u [ 15.639621] usbcore: registered new interface driver rtl8150 [ 15.642087] sis900.c: v1.08.10 Apr. 2 2006 [ 15.643268] sky2: driver version 1.30 [ 15.644734] Solos PCI Driver Version 1.04 [ 15.646031] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 15.650441] usbcore: registered new interface driver usbserial_generic [ 15.650606] usbserial: USB Serial support registered for generic [ 15.651545] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker [ 15.652747] usbcore: registered new interface driver visor [ 15.652906] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 15.653122] usbserial: USB Serial support registered for Sony Clie 5.0 [ 15.653276] usbserial: USB Serial support registered for Sony Clie 3.5 [ 15.656701] wireguard: WireGuard 1.0.20200712 loaded. See www.wireguard.com for information. [ 15.656908] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 15.732846] xt_ndpi v1.2 ndpi 3.3.0 IPv6=YES debug_message=no [ 15.732846] BT: hash_size 0k, hash_expiation 0 sec, log_size 128kb [ 15.732846] sizeof hash_ip4p_node=44 id_struct=296 [ 15.732846] flow_struct=2248 packet_struct=1400 [ 15.732846] flow_tcp_struct=96 flow_udp_struct=40 int_one_line_struct=16 [ 15.732846] ndpi_ip_addr_t=16 ndpi_protocol=4 nf_ct_ext_ndpi=176 [ 15.732846] flow_info=112 spinlock_t=4 NF_EXT_ID 7 [ 15.733400] xt_ndpi: MAX_PROTOCOLS 320 LAST_PROTOCOL 252 [ 15.733531] xt_ndpi: flow acctounting OFF [ 15.737833] xt_time: kernel timezone is -0000 [ 15.738415] usbcore: registered new interface driver ark3116 [ 15.738569] usbserial: USB Serial support registered for ark3116 [ 15.740441] usbcore: registered new interface driver asix [ 15.741601] usbcore: registered new interface driver ax88179_178a [ 15.742104] usbcore: registered new interface driver belkin_sa [ 15.742255] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 15.742784] usbcore: registered new interface driver cdc_eem [ 15.743537] usbcore: registered new interface driver cdc_ether [ 15.744809] usbcore: registered new interface driver cdc_ncm [ 15.745281] usbcore: registered new interface driver cdc_subset [ 15.760410] usbcore: registered new interface driver ch341 [ 15.760576] usbserial: USB Serial support registered for ch341-uart [ 15.761242] usbcore: registered new interface driver cp210x [ 15.761402] usbserial: USB Serial support registered for cp210x [ 15.762381] usbcore: registered new interface driver cypress_m8 [ 15.762535] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 15.762741] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 15.762947] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 15.764353] usbcore: registered new interface driver dm9601 [ 15.766189] usbcore: registered new interface driver ftdi_sio [ 15.766354] usbserial: USB Serial support registered for FTDI USB Serial Device [ 15.767145] usbcore: registered new interface driver garmin_gps [ 15.767308] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 15.767848] usbcore: registered new interface driver huawei_cdc_ncm [ 15.776036] Intel(R) Wireless WiFi driver for Linux [ 15.776743] usbcore: registered new interface driver kalmia [ 15.777275] usbcore: registered new interface driver keyspan [ 15.777439] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 15.777651] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 15.777863] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 15.778076] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 15.813009] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 15.813557] usbcore: registered new interface driver mct_u232 [ 15.813723] usbserial: USB Serial support registered for MCT U232 [ 15.814154] usbcore: registered new interface driver mos7720 [ 15.814316] usbserial: USB Serial support registered for Moschip 2 port adapter [ 15.815132] usbcore: registered new interface driver mt7601u [ 15.815631] usbcore: registered new interface driver oti6858 [ 15.815797] usbserial: USB Serial support registered for oti6858 [ 15.816320] usbcore: registered new interface driver pl2303 [ 15.816482] usbserial: USB Serial support registered for pl2303 [ 15.818047] PPP generic driver version 2.4.2 [ 15.818905] NET: Registered protocol family 24 [ 15.819639] usbcore: registered new interface driver qmi_wwan [ 15.820710] usbcore: registered new interface driver rndis_host [ 15.827484] usbcore: registered new interface driver rtl8187 [ 15.828479] usbcore: registered new interface driver rtl8xxxu [ 15.835201] usbcore: registered new interface driver sierra [ 15.835371] usbserial: USB Serial support registered for Sierra USB modem [ 15.836154] usbcore: registered new interface driver sierra_net [ 15.837448] usbcore: registered new interface driver smsc75xx [ 15.838755] usbcore: registered new interface driver smsc95xx [ 15.839933] usbcore: registered new interface driver sr9700 [ 15.840561] usbcore: registered new interface driver ti_usb_3410_5052 [ 15.840727] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 15.840947] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 15.841605] usbcore: registered new interface driver usb_serial_simple [ 15.841776] usbserial: USB Serial support registered for carelink [ 15.841934] usbserial: USB Serial support registered for zio [ 15.842087] usbserial: USB Serial support registered for funsoft [ 15.842243] usbserial: USB Serial support registered for flashloader [ 15.842400] usbserial: USB Serial support registered for google [ 15.842551] usbserial: USB Serial support registered for libtransistor [ 15.842710] usbserial: USB Serial support registered for vivopay [ 15.842864] usbserial: USB Serial support registered for moto_modem [ 15.843020] usbserial: USB Serial support registered for motorola_tetra [ 15.843182] usbserial: USB Serial support registered for novatel_gps [ 15.843339] usbserial: USB Serial support registered for hp4x [ 15.843495] usbserial: USB Serial support registered for suunto [ 15.843653] usbserial: USB Serial support registered for siemens_mpi [ 15.863482] usbcore: registered new interface driver cdc_mbim [ 15.864037] usbcore: registered new interface driver ipw [ 15.864210] usbserial: USB Serial support registered for IPWireless converter [ 15.869721] usbcore: registered new interface driver option [ 15.869892] usbserial: USB Serial support registered for GSM modem (1-port) [ 15.872720] usbcore: registered new interface driver qcserial [ 15.872889] usbserial: USB Serial support registered for Qualcomm USB modem [ 15.878285] usbcore: registered new interface driver rt2800usb [ 15.884696] usbcore: registered new interface driver rtl8192cu [ 16.321907] ath: phy0: ASPM enabled: 0x42 [ 16.322042] ath: EEPROM regdomain: 0x65 [ 16.322043] ath: EEPROM indicates we should expect a direct regpair map [ 16.322046] ath: Country alpha2 being used: 00 [ 16.322047] ath: Regpair used: 0x65 [ 16.337501] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 16.338127] gpiochip_find_base: found new base at 502 [ 16.338435] gpio gpiochip0: (ath9k-phy0): added GPIO chardev (254:0) [ 16.338465] gpiochip_setup_dev: registered GPIOs 502 to 511 on device: gpiochip0 (ath9k-phy0) [ 16.338511] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90000170000, irq=17 [ 16.338931] kmodloader: done loading kernel modules from /etc/modules.d/* [ 21.195191] tg3 0000:05:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 21.195337] tg3 0000:05:00.0 eth0: Flow control is on for TX and on for RX [ 21.195488] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.195759] IPv6: ADDRCONF(NETDEV_CHANGE): wan1: link becomes ready [ 21.195958] IPv6: ADDRCONF(NETDEV_CHANGE): wan2: link becomes ready [ 52.768232] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 57.774477] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 62.782933] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 1113.304463] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 1139.004759] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 1144.012493] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 1152.452991] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 1157.458167] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 1162.467717] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [ 8519.147571] nf_ct_snmp_trap: dropping packet: parser failed [ 8519.147571] IN= OUT= SRC=10.255.255.2 DST=193.114.250.51 LEN=58 TOS=0x00 PREC=0x00 TTL=63 ID=28486 PROTO=UDP SPT=51413 DPT=162 LEN=38 MARK=0x2 [ 8522.164104] nf_ct_snmp_trap: dropping packet: parser failed [ 8522.164104] IN= OUT= SRC=10.255.255.2 DST=193.114.250.51 LEN=58 TOS=0x00 PREC=0x00 TTL=63 ID=28537 PROTO=UDP SPT=51413 DPT=162 LEN=38 MARK=0x2 [ 9954.443551] traps: logread[694] general protection fault ip:7f2b23091547 sp:7ffcc25ebfb0 error:0 in libc.so[7f2b23050000+49000] [39556.192978] traps: logread[13648] general protection fault ip:7f7e50450547 sp:7ffd26ea3de0 error:0 in libc.so[7f7e5040f000+49000] [74343.144043] traps: logread[30395] general protection fault ip:7f8d737af547 sp:7ffe838d6b60 error:0 in libc.so[7f8d7376e000+49000] [87084.673515] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87089.676470] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87095.237279] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87100.240686] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87105.244458] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87138.812450] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87143.815973] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87538.948532] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87544.166171] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87585.251784] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87590.255652] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87595.567270] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87630.739416] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87635.753779] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87889.771939] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87915.591258] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87920.609175] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87927.166801] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87932.187323] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87937.211145] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87962.354488] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87967.371342] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87993.248513] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [87998.266089] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88004.590363] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88009.605518] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88015.032066] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88020.039660] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88025.048351] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88030.380741] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88035.393900] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88040.403238] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88055.251725] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88060.274174] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88065.286445] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88070.639942] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88075.645749] Dead loop on virtual device 6in4-omr6in4, fix it urgently! [88080.655797] Dead loop on virtual device 6in4-omr6in4, fix it urgently!

Ysurac commented 4 years ago

For the test, can you use omr-test-speed on the router and with each interface and test for about 2 minutes ?

vinceducat commented 4 years ago

via VPS

root@OpenMPTCProuter:~# omr-test-speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 31 10.0G 31 3269M 0 0 22.1M 0 0:07:42 0:02:27 0:05:15 23.3M^C root@OpenMPTCProuter:~# omr-test-speed wan1 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 10.0G 0 68.5M 0 0 571k 0 5:05:31 0:02:02 5:03:29 628k^C

root@OpenMPTCProuter:~# omr-test-speed wan2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 3 10.0G 3 329M 0 0 2664k 0 1:05:34 0:02:06 1:03:28 1538k^C => always this strange speed compare to "omr-test-speed"

vinceducat commented 4 years ago

without vps

root@OpenMPTCProuter:~# omr-test-speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 3 10.0G 3 320M 0 0 2656k 0 1:05:47 0:02:03 1:03:44 2301k^C

root@OpenMPTCProuter:~# omr-test-speed wan1 ipset v7.4: The set with the given name does not exist % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 10.0G 0 64.7M 0 0 539k 0 5:24:01 0:02:02 5:21:59 544k^C

% Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 5 10.0G 5 604M 0 0 2226k 0 1:18:30 0:04:37 1:13:53 1080k^C

but in the same time testdebit.info give me : 263Mb/s down 42Mb/s up and 40ms ping ....

Ysurac commented 4 years ago

How do you test without VPS ?

vinceducat commented 4 years ago

y change ip of vps in the config with a flase ip

vinceducat commented 4 years ago

redo the test with disable server option same result ...

Ysurac commented 4 years ago

You can try a fresh install of OMR, maybe some configuration issues.

vinceducat commented 4 years ago

i will try tomorrow not possible now ;-( (i wan t home customer go on strike :-) :-) :-) )

vinceducat commented 4 years ago

fresh install without reloaded backup ?..

Ysurac commented 4 years ago

yes

vinceducat commented 4 years ago

do a fesh full install OMR 0.55.2 and same perf 100mb/s ........ :-(

perhaps a probleme on VPS ..??

vinceducat commented 4 years ago

also try a vps on hetzner type cpx11 2vcpu 2go ram ... and perf are ok => 270Mb/s :-) :-)

detail

Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 40 bits physical, 48 bits virtual CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: AuthenticAMD CPU family: 23 Model: 1 Model name: AMD EPYC Processor (with IBPB) Stepping: 2 CPU MHz: 2495.312 BogoMIPS: 4990.62 Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 64K L2 cache: 512K L3 cache: 8192K NUMA node0 CPU(s): 0,1 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm rep_good nopl cpuid extd_apicid tsc_known_freq pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw topoext ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 arat

compare to milky perf1

Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 40 bits physical, 48 bits virtual CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 44 Model name: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz Stepping: 2 CPU MHz: 2666.760 BogoMIPS: 5333.52 Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K L3 cache: 16384K NUMA node0 CPU(s): 0,1 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl xtopology cpuid tsc_known_freq pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes hypervisor lahf_lm cpuid_fault pti tsc_adjust arat

@Ysurac do you think some caracteristics explain the diff ?

vinceducat commented 4 years ago

@Ysurac no idea about this difference ?

Ysurac commented 4 years ago

Difficult to compare vCPU, some can have more dedicated ressources...

rifaterdemsahin commented 4 years ago

I gave up the VGPUs last month and i will go for i5 with enough ram and nvme

Rationale : routers should be easy reset start stop...

my planned purchase https://www.amazon.co.uk/gp/product/B076B6SWG5/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=rifaterdemsah-21&creative=6738&linkCode=as2&creativeASIN=B076B6SWG5&linkId=7eb4dbb17a7cbf769408adc483f40887

github-actions[bot] commented 3 years ago

This issue is stale because it has been open 90 days with no activity. Remove stale label or comment or this will be closed in 5 days