TPLink T9UH USB WiFi Adapter Not Working

Expected Behavior

Added the USB adapter T9UH to one of the usb3.0 ports in my RPi4. I've installed the driver kmod-rtl8192cu (hope this is the correct one). I'm supposed to see the new WiFi radios in the wireless screen (along with the inbuilt radio).

Current Behavior

I'm seeing only the inbuilt radio of my RPi4

Possible Solution

Am I using the correct driver ? I see more rtl drivers in the software section & in fact installed all of them.

Steps to Reproduce the Problem

Add T9UH to one of the usb ports
Install the driver
Look for the new radio in wireless section

Context (Environment)

Specifications

OpenMPTCProuter version: v0.55.3
OpenMPTCProuter VPS version: 0.1017 5.4.52-mptcp
OpenMPTCProuter platform: RPI4

Below is the kernel log

_[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.4.58 (circleci@default-2a7790e6-62ca-4901-8399-62d30064fe6c) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r0+14198-da98603597)) #0 SMP Tue Aug 18 16:14:54 2020 [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2 [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 3792 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242688 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 12032 pages used for memmap [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 21 pages/cpu s45144 r8192 d32680 u86016 [ 0.000000] pcpu-alloc: s45144 r8192 d32680 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:99:93:8B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x37400000-0x3b400000] (64MB) [ 0.000000] Memory: 3828792K/4050944K available (7038K kernel code, 430K rwdata, 1836K rodata, 512K init, 539K bss, 156616K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x2dc/0x3dc with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000156] Console: colour dummy device 80x25 [ 0.000395] printk: console [tty1] enabled [ 0.000428] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000450] pid_max: default: 32768 minimum: 301 [ 0.000643] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000727] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001371] Disabling memory control group subsystem [ 0.002064] ASID allocator initialised with 32768 entries [ 0.002153] rcu: Hierarchical SRCU implementation. [ 0.002783] smp: Bringing up secondary CPUs ... [ 0.003171] Detected PIPT I-cache on CPU1 [ 0.003223] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.003660] Detected PIPT I-cache on CPU2 [ 0.003695] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.004194] Detected PIPT I-cache on CPU3 [ 0.004227] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.004298] smp: Brought up 1 node, 4 CPUs [ 0.004326] SMP: Total of 4 processors activated. [ 0.004339] CPU features: detected: 32-bit EL0 Support [ 0.004352] CPU features: detected: CRC32 instructions [ 0.004403] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.004421] CPU: All CPU(s) started at EL2 [ 0.004449] alternatives: patching kernel code [ 0.005584] devtmpfs: initialized [ 0.012504] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.012547] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.014250] pinctrl core: initialized pinctrl subsystem [ 0.014531] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT [ 0.015134] NET: Registered protocol family 16 [ 0.016506] DMA: preallocated 1024 KiB pool for atomic allocations [ 0.017030] cpuidle: using governor ladder [ 0.017061] cpuidle: using governor menu [ 0.017328] Serial: AMBA PL011 UART driver [ 0.018805] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.028045] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-04-15 11:41, variant start [ 0.032042] raspberrypi-firmware soc:firmware: Firmware hash is 1103ec16df2571274600b377411499bf5aed6d0d [ 0.056826] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.057659] reg-fixed-voltage fixedregulator_3v3: GPIO lookup for consumer (null) [ 0.057666] reg-fixed-voltage fixedregulator_3v3: using device tree for GPIO lookup [ 0.057683] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator_3v3[0]' [ 0.057696] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_3v3[0]' [ 0.057705] reg-fixed-voltage fixedregulator_3v3: using lookup tables for GPIO lookup [ 0.057713] reg-fixed-voltage fixedregulator_3v3: No GPIO consumer (null) found [ 0.057907] reg-fixed-voltage fixedregulator_5v0: GPIO lookup for consumer (null) [ 0.057913] reg-fixed-voltage fixedregulator_5v0: using device tree for GPIO lookup [ 0.057926] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator_5v0[0]' [ 0.057937] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_5v0[0]' [ 0.057945] reg-fixed-voltage fixedregulator_5v0: using lookup tables for GPIO lookup [ 0.057952] reg-fixed-voltage fixedregulator_5v0: No GPIO consumer (null) found [ 0.058151] reg-fixed-voltage sd_vcc_reg: GPIO lookup for consumer (null) [ 0.058157] reg-fixed-voltage sd_vcc_reg: using device tree for GPIO lookup [ 0.058170] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/sd_vcc_reg[0]' [ 0.058186] reg-fixed-voltage sd_vcc_reg: No GPIO consumer (null) found [ 0.058329] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer (null) [ 0.058335] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup [ 0.058349] gpio-regulator sd_io_1v8_reg: No GPIO consumer (null) found [ 0.058657] SCSI subsystem initialized [ 0.058803] usbcore: registered new interface driver usbfs [ 0.058845] usbcore: registered new interface driver hub [ 0.058900] usbcore: registered new device driver usb [ 0.059801] clocksource: Switched to clocksource arch_sys_counter [ 0.065404] thermal_sys: Registered thermal governor 'step_wise' [ 0.065658] NET: Registered protocol family 2 [ 0.066375] MPTCP tokens hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.066486] MPTCP request tokens hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.066630] default registered [ 0.066641] default registered [ 0.066650] MPTCP: Unstable branch [ 0.066664] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.066719] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.066920] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.067391] TCP: Hash tables configured (established 32768 bind 32768) [ 0.067589] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.067653] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.067903] NET: Registered protocol family 1 [ 0.067942] PCI: CLS 0 bytes, default 64 [ 0.069024] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.073551] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.097636] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.098247] pinctrl-bcm2835 fe200000.gpio: try to register 54 pins ... [ 0.098255] pinctrl core: registered pin 0 (gpio0) on pinctrl-bcm2835 [ 0.098261] pinctrl core: registered pin 1 (gpio1) on pinctrl-bcm2835 [ 0.098266] pinctrl core: registered pin 2 (gpio2) on pinctrl-bcm2835 [ 0.098270] pinctrl core: registered pin 3 (gpio3) on pinctrl-bcm2835 [ 0.098275] pinctrl core: registered pin 4 (gpio4) on pinctrl-bcm2835 [ 0.098279] pinctrl core: registered pin 5 (gpio5) on pinctrl-bcm2835 [ 0.098284] pinctrl core: registered pin 6 (gpio6) on pinctrl-bcm2835 [ 0.098288] pinctrl core: registered pin 7 (gpio7) on pinctrl-bcm2835 [ 0.098292] pinctrl core: registered pin 8 (gpio8) on pinctrl-bcm2835 [ 0.098297] pinctrl core: registered pin 9 (gpio9) on pinctrl-bcm2835 [ 0.098302] pinctrl core: registered pin 10 (gpio10) on pinctrl-bcm2835 [ 0.098306] pinctrl core: registered pin 11 (gpio11) on pinctrl-bcm2835 [ 0.098311] pinctrl core: registered pin 12 (gpio12) on pinctrl-bcm2835 [ 0.098318] pinctrl core: registered pin 13 (gpio13) on pinctrl-bcm2835 [ 0.098323] pinctrl core: registered pin 14 (gpio14) on pinctrl-bcm2835 [ 0.098327] pinctrl core: registered pin 15 (gpio15) on pinctrl-bcm2835 [ 0.098332] pinctrl core: registered pin 16 (gpio16) on pinctrl-bcm2835 [ 0.098336] pinctrl core: registered pin 17 (gpio17) on pinctrl-bcm2835 [ 0.098341] pinctrl core: registered pin 18 (gpio18) on pinctrl-bcm2835 [ 0.098345] pinctrl core: registered pin 19 (gpio19) on pinctrl-bcm2835 [ 0.098350] pinctrl core: registered pin 20 (gpio20) on pinctrl-bcm2835 [ 0.098354] pinctrl core: registered pin 21 (gpio21) on pinctrl-bcm2835 [ 0.098359] pinctrl core: registered pin 22 (gpio22) on pinctrl-bcm2835 [ 0.098363] pinctrl core: registered pin 23 (gpio23) on pinctrl-bcm2835 [ 0.098368] pinctrl core: registered pin 24 (gpio24) on pinctrl-bcm2835 [ 0.098372] pinctrl core: registered pin 25 (gpio25) on pinctrl-bcm2835 [ 0.098377] pinctrl core: registered pin 26 (gpio26) on pinctrl-bcm2835 [ 0.098381] pinctrl core: registered pin 27 (gpio27) on pinctrl-bcm2835 [ 0.098386] pinctrl core: registered pin 28 (gpio28) on pinctrl-bcm2835 [ 0.098390] pinctrl core: registered pin 29 (gpio29) on pinctrl-bcm2835 [ 0.098394] pinctrl core: registered pin 30 (gpio30) on pinctrl-bcm2835 [ 0.098399] pinctrl core: registered pin 31 (gpio31) on pinctrl-bcm2835 [ 0.098403] pinctrl core: registered pin 32 (gpio32) on pinctrl-bcm2835 [ 0.098408] pinctrl core: registered pin 33 (gpio33) on pinctrl-bcm2835 [ 0.098412] pinctrl core: registered pin 34 (gpio34) on pinctrl-bcm2835 [ 0.098416] pinctrl core: registered pin 35 (gpio35) on pinctrl-bcm2835 [ 0.098421] pinctrl core: registered pin 36 (gpio36) on pinctrl-bcm2835 [ 0.098425] pinctrl core: registered pin 37 (gpio37) on pinctrl-bcm2835 [ 0.098430] pinctrl core: registered pin 38 (gpio38) on pinctrl-bcm2835 [ 0.098434] pinctrl core: registered pin 39 (gpio39) on pinctrl-bcm2835 [ 0.098439] pinctrl core: registered pin 40 (gpio40) on pinctrl-bcm2835 [ 0.098443] pinctrl core: registered pin 41 (gpio41) on pinctrl-bcm2835 [ 0.098447] pinctrl core: registered pin 42 (gpio42) on pinctrl-bcm2835 [ 0.098452] pinctrl core: registered pin 43 (gpio43) on pinctrl-bcm2835 [ 0.098456] pinctrl core: registered pin 44 (gpio44) on pinctrl-bcm2835 [ 0.098464] pinctrl core: registered pin 45 (gpio45) on pinctrl-bcm2835 [ 0.098468] pinctrl core: registered pin 46 (gpio46) on pinctrl-bcm2835 [ 0.098473] pinctrl core: registered pin 47 (gpio47) on pinctrl-bcm2835 [ 0.098477] pinctrl core: registered pin 48 (gpio48) on pinctrl-bcm2835 [ 0.098482] pinctrl core: registered pin 49 (gpio49) on pinctrl-bcm2835 [ 0.098486] pinctrl core: registered pin 50 (gpio50) on pinctrl-bcm2835 [ 0.098490] pinctrl core: registered pin 51 (gpio51) on pinctrl-bcm2835 [ 0.098495] pinctrl core: registered pin 52 (gpio52) on pinctrl-bcm2835 [ 0.098499] pinctrl core: registered pin 53 (gpio53) on pinctrl-bcm2835 [ 0.098510] pinctrl-bcm2835 fe200000.gpio: no hogs found [ 0.098726] pinctrl-bcm2835 fe200000.gpio: get 00000000 (0 => gpio_in) [ 0.098733] pinctrl-bcm2835 fe200000.gpio: get 00000000 (1 => gpio_in) [ 0.098740] pinctrl-bcm2835 fe200000.gpio: get 00000000 (2 => gpio_in) [ 0.098747] pinctrl-bcm2835 fe200000.gpio: get 00000000 (3 => gpio_in) [ 0.098753] pinctrl-bcm2835 fe200000.gpio: get 00000000 (4 => gpio_in) [ 0.098759] pinctrl-bcm2835 fe200000.gpio: get 00000000 (5 => gpio_in) [ 0.098766] pinctrl-bcm2835 fe200000.gpio: get 00000000 (6 => gpio_in) [ 0.098772] pinctrl-bcm2835 fe200000.gpio: get 00000000 (7 => gpio_in) [ 0.098778] pinctrl-bcm2835 fe200000.gpio: get 00000000 (8 => gpio_in) [ 0.098784] pinctrl-bcm2835 fe200000.gpio: get 00000000 (9 => gpio_in) [ 0.098791] pinctrl-bcm2835 fe200000.gpio: get 00024000 (10 => gpio_in) [ 0.098798] pinctrl-bcm2835 fe200000.gpio: get 00024000 (11 => gpio_in) [ 0.098805] pinctrl-bcm2835 fe200000.gpio: get 00024000 (12 => gpio_in) [ 0.098811] pinctrl-bcm2835 fe200000.gpio: get 00024000 (13 => gpio_in) [ 0.098818] pinctrl-bcm2835 fe200000.gpio: get 00024000 (14 => alt0) [ 0.098824] pinctrl-bcm2835 fe200000.gpio: get 00024000 (15 => alt0) [ 0.098831] pinctrl-bcm2835 fe200000.gpio: get 00024000 (16 => gpio_in) [ 0.098837] pinctrl-bcm2835 fe200000.gpio: get 00024000 (17 => gpio_in) [ 0.098844] pinctrl-bcm2835 fe200000.gpio: get 00024000 (18 => gpio_in) [ 0.098850] pinctrl-bcm2835 fe200000.gpio: get 00024000 (19 => gpio_in) [ 0.098857] pinctrl-bcm2835 fe200000.gpio: get 12000000 (20 => gpio_in) [ 0.098863] pinctrl-bcm2835 fe200000.gpio: get 12000000 (21 => gpio_in) [ 0.098870] pinctrl-bcm2835 fe200000.gpio: get 12000000 (22 => gpio_in) [ 0.098876] pinctrl-bcm2835 fe200000.gpio: get 12000000 (23 => gpio_in) [ 0.098882] pinctrl-bcm2835 fe200000.gpio: get 12000000 (24 => gpio_in) [ 0.098889] pinctrl-bcm2835 fe200000.gpio: get 12000000 (25 => gpio_in) [ 0.098895] pinctrl-bcm2835 fe200000.gpio: get 12000000 (26 => gpio_in) [ 0.098901] pinctrl-bcm2835 fe200000.gpio: get 12000000 (27 => gpio_in) [ 0.098908] pinctrl-bcm2835 fe200000.gpio: get 12000000 (28 => alt5) [ 0.098914] pinctrl-bcm2835 fe200000.gpio: get 12000000 (29 => alt5) [ 0.098920] pinctrl-bcm2835 fe200000.gpio: get 00000000 (30 => gpio_in) [ 0.098927] pinctrl-bcm2835 fe200000.gpio: get 00000000 (31 => gpio_in) [ 0.098933] pinctrl-bcm2835 fe200000.gpio: get 00000000 (32 => gpio_in) [ 0.098939] pinctrl-bcm2835 fe200000.gpio: get 00000000 (33 => gpio_in) [ 0.098946] pinctrl-bcm2835 fe200000.gpio: get 00000000 (34 => gpio_in) [ 0.098952] pinctrl-bcm2835 fe200000.gpio: get 00000000 (35 => gpio_in) [ 0.098958] pinctrl-bcm2835 fe200000.gpio: get 00000000 (36 => gpio_in) [ 0.098964] pinctrl-bcm2835 fe200000.gpio: get 00000000 (37 => gpio_in) [ 0.098971] pinctrl-bcm2835 fe200000.gpio: get 00000000 (38 => gpio_in) [ 0.098977] pinctrl-bcm2835 fe200000.gpio: get 00000000 (39 => gpio_in) [ 0.098983] pinctrl-bcm2835 fe200000.gpio: get 00000064 (40 => alt0) [ 0.098990] pinctrl-bcm2835 fe200000.gpio: get 00000064 (41 => alt0) [ 0.098996] pinctrl-bcm2835 fe200000.gpio: get 00000064 (42 => gpio_out) [ 0.099003] pinctrl-bcm2835 fe200000.gpio: get 00000064 (43 => gpio_in) [ 0.099009] pinctrl-bcm2835 fe200000.gpio: get 00000064 (44 => gpio_in) [ 0.099016] pinctrl-bcm2835 fe200000.gpio: get 00000064 (45 => gpio_in) [ 0.099022] pinctrl-bcm2835 fe200000.gpio: get 00000064 (46 => gpio_in) [ 0.099028] pinctrl-bcm2835 fe200000.gpio: get 00000064 (47 => gpio_in) [ 0.099035] pinctrl-bcm2835 fe200000.gpio: get 00000064 (48 => gpio_in) [ 0.099041] pinctrl-bcm2835 fe200000.gpio: get 00000064 (49 => gpio_in) [ 0.099047] pinctrl-bcm2835 fe200000.gpio: get 00000000 (50 => gpio_in) [ 0.099054] pinctrl-bcm2835 fe200000.gpio: get 00000000 (51 => gpio_in) [ 0.099060] pinctrl-bcm2835 fe200000.gpio: get 00000000 (52 => gpio_in) [ 0.099066] pinctrl-bcm2835 fe200000.gpio: get 00000000 (53 => gpio_in) [ 0.099204] gpio gpiochip0: (pinctrl-bcm2835): added GPIO chardev (254:0) [ 0.099211] gpiochip_setup_dev: registered GPIOs 0 to 53 on device: gpiochip0 (pinctrl-bcm2835) [ 0.099523] gpiochip_find_base: found new base at 504 [ 0.099933] gpio gpiochip1: (raspberrypi-exp-gpio): added GPIO chardev (254:1) [ 0.099939] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (raspberrypi-exp-gpio) [ 0.100202] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.100228] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 0.100265] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 0.100299] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000 [ 0.149870] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC) [ 0.150030] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.150049] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.150068] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.150108] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.150196] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.153500] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.153656] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.153740] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.153904] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.157139] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.157175] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.157196] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.157257] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.157273] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.157314] pcieport 0000:00:00.0: no of_node; not parsing pinctrl DT [ 0.157419] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 0.157496] pcie_pme 0000:00:00.0:pcie001: no of_node; not parsing pinctrl DT [ 0.157545] pcieport 0000:00:00.0: PME: Signaling with IRQ 38 [ 0.157635] aer 0000:00:00.0:pcie002: no of_node; not parsing pinctrl DT [ 0.157772] pcieport 0000:00:00.0: AER: enabled with IRQ 38 [ 0.157942] pci 0000:01:00.0: enabling device (0000 -> 0002) [ 0.158301] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver. [ 0.158327] bcm2708_fb: probe of soc:fb failed with error -2 [ 0.159149] raspberrypi-clk firmware-clocks: CPU frequency range: min 600000000, max 1500000000 [ 0.160587] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.160842] serial8250 serial8250: no of_node; not parsing pinctrl DT [ 0.161476] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.161929] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 0.162140] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.168661] brd: module loaded [ 0.172089] loop: module loaded [ 0.172408] bcm2835-power bcm2835-power: no of_node; not parsing pinctrl DT [ 0.172829] Loading iSCSI transport class v2.0-870. [ 0.173911] mdio_bus fixed-0: GPIO lookup for consumer reset [ 0.173917] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 0.173925] mdio_bus fixed-0: No GPIO consumer reset found [ 0.173943] libphy: Fixed MDIO Bus: probed [ 0.174188] bcmgenet fd580000.ethernet: failed to get enet clock [ 0.174208] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 0.174226] bcmgenet fd580000.ethernet: failed to get enet-wol clock [ 0.174242] bcmgenet fd580000.ethernet: failed to get enet-eee clock [ 0.174267] bcmgenet: Skipping UMAC reset [ 0.174491] mdio_bus unimac-mdio--19: GPIO lookup for consumer reset [ 0.174497] mdio_bus unimac-mdio--19: using device tree for GPIO lookup [ 0.174514] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/scb/ethernet@7d580000/mdio@e14[0]' [ 0.174527] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/scb/ethernet@7d580000/mdio@e14[0]' [ 0.174536] mdio_bus unimac-mdio--19: using lookup tables for GPIO lookup [ 0.174543] mdio_bus unimac-mdio--19: No GPIO consumer reset found [ 0.187825] libphy: bcmgenet MII bus: probed [ 0.212067] mdio_bus unimac-mdio--19:01: GPIO lookup for consumer reset [ 0.212074] mdio_bus unimac-mdio--19:01: using device tree for GPIO lookup [ 0.212091] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/scb/ethernet@7d580000/mdio@e14/ethernet-phy@1[0]' [ 0.212105] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/scb/ethernet@7d580000/mdio@e14/ethernet-phy@1[0]' [ 0.212113] mdio_bus unimac-mdio--19:01: using lookup tables for GPIO lookup [ 0.212120] mdio_bus unimac-mdio--19:01: No GPIO consumer reset found [ 0.235842] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 0.236525] xhci_hcd 0000:01:00.0: no of_node; not parsing pinctrl DT [ 0.236743] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.236776] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.237491] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 0.238128] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.238149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.238168] usb usb1: Product: xHCI Host Controller [ 0.238182] usb usb1: Manufacturer: Linux 5.4.58 xhci-hcd [ 0.238196] usb usb1: SerialNumber: 0000:01:00.0 [ 0.238562] hub 1-0:1.0: no of_node; not parsing pinctrl DT [ 0.238585] hub 1-0:1.0: USB hub found [ 0.238653] hub 1-0:1.0: 1 port detected [ 0.239056] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.239078] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.239102] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.239326] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.239346] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.239363] usb usb2: Product: xHCI Host Controller [ 0.239377] usb usb2: Manufacturer: Linux 5.4.58 xhci-hcd [ 0.239390] usb usb2: SerialNumber: 0000:01:00.0 [ 0.239710] hub 2-0:1.0: no of_node; not parsing pinctrl DT [ 0.239729] hub 2-0:1.0: USB hub found [ 0.239813] hub 2-0:1.0: 4 ports detected [ 0.240565] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.240655] dwc_otg: FIQ enabled [ 0.240659] dwc_otg: NAK holdoff enabled [ 0.240662] dwc_otg: FIQ split-transaction FSM enabled [ 0.240668] Module dwc_common_port init [ 0.240907] usbcore: registered new interface driver uas [ 0.240982] usbcore: registered new interface driver usb-storage [ 0.241107] mousedev: PS/2 mouse device common for all mice [ 0.241404] bcm2835-wdt bcm2835-wdt: no of_node; not parsing pinctrl DT [ 0.241589] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.241752] raspberrypi-cpufreq raspberrypi-cpufreq: no of_node; not parsing pinctrl DT [ 0.242127] cpufreq-dt cpufreq-dt: no of_node; not parsing pinctrl DT [ 0.242533] sdhci: Secure Digital Host Controller Interface driver [ 0.242547] sdhci: Copyright(c) Pierre Ossman [ 0.242629] pinctrl core: add 12 pinctrl maps [ 0.242650] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34 [ 0.242669] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35 [ 0.242681] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36 [ 0.242693] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37 [ 0.242705] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38 [ 0.242717] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39 [ 0.242730] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr [ 0.242740] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in) [ 0.242747] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3) [ 0.242757] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr [ 0.242764] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in) [ 0.242771] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3) [ 0.242778] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr [ 0.242785] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in) [ 0.242792] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3) [ 0.242799] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr [ 0.242806] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in) [ 0.242812] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3) [ 0.242819] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr [ 0.242826] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in) [ 0.242833] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3) [ 0.242839] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr [ 0.242846] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in) [ 0.242853] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3) [ 0.242983] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 0.243040] pinctrl-bcm2835 fe200000.gpio: read 3ffff000 (34 => alt3) [ 0.243047] pinctrl-bcm2835 fe200000.gpio: write 3fff8000 (34 <= gpio_in) [ 0.243055] pinctrl-bcm2835 fe200000.gpio: read 3fff8000 (35 => alt3) [ 0.243061] pinctrl-bcm2835 fe200000.gpio: write 3ffc0000 (35 <= gpio_in) [ 0.243068] pinctrl-bcm2835 fe200000.gpio: read 3ffc0000 (36 => alt3) [ 0.243074] pinctrl-bcm2835 fe200000.gpio: write 3fe00000 (36 <= gpio_in) [ 0.243081] pinctrl-bcm2835 fe200000.gpio: read 3fe00000 (37 => alt3) [ 0.243088] pinctrl-bcm2835 fe200000.gpio: write 3f000000 (37 <= gpio_in) [ 0.243095] pinctrl-bcm2835 fe200000.gpio: read 3f000000 (38 => alt3) [ 0.243102] pinctrl-bcm2835 fe200000.gpio: write 38000000 (38 <= gpio_in) [ 0.243108] pinctrl-bcm2835 fe200000.gpio: read 38000000 (39 => alt3) [ 0.243115] pinctrl-bcm2835 fe200000.gpio: write 00000000 (39 <= gpio_in) [ 0.243259] Error: Driver 'sdhost-bcm2835' is already registered, aborting... [ 0.243273] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.243362] pinctrl core: add 12 pinctrl maps [ 0.243378] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34 [ 0.243391] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35 [ 0.243403] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36 [ 0.243415] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37 [ 0.243428] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38 [ 0.243440] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39 [ 0.243451] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr [ 0.243459] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in) [ 0.243466] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3) [ 0.243473] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr [ 0.243480] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in) [ 0.243487] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3) [ 0.243494] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr [ 0.243500] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in) [ 0.243507] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3) [ 0.243514] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr [ 0.243521] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in) [ 0.243527] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3) [ 0.243534] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr [ 0.243541] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in) [ 0.243547] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3) [ 0.243554] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr [ 0.243561] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in) [ 0.243567] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3) [ 0.243655] sdhci-iproc fe300000.mmcnr: GPIO lookup for consumer wp [ 0.243661] sdhci-iproc fe300000.mmcnr: using device tree for GPIO lookup [ 0.243678] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmcnr@7e300000[0]' [ 0.243691] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmcnr@7e300000[0]' [ 0.243700] sdhci-iproc fe300000.mmcnr: using lookup tables for GPIO lookup [ 0.243707] sdhci-iproc fe300000.mmcnr: No GPIO consumer wp found [ 0.243765] pinctrl-bcm2835 fe200000.gpio: read 3ffff000 (34 => alt3) [ 0.243772] pinctrl-bcm2835 fe200000.gpio: write 3fff8000 (34 <= gpio_in) [ 0.243779] pinctrl-bcm2835 fe200000.gpio: read 3fff8000 (35 => alt3) [ 0.243818] pinctrl-bcm2835 fe200000.gpio: write 3ffc0000 (35 <= gpio_in) [ 0.243825] pinctrl-bcm2835 fe200000.gpio: read 3ffc0000 (36 => alt3) [ 0.243832] pinctrl-bcm2835 fe200000.gpio: write 3fe00000 (36 <= gpio_in) [ 0.243839] pinctrl-bcm2835 fe200000.gpio: read 3fe00000 (37 => alt3) [ 0.243846] pinctrl-bcm2835 fe200000.gpio: write 3f000000 (37 <= gpio_in) [ 0.243853] pinctrl-bcm2835 fe200000.gpio: read 3f000000 (38 => alt3) [ 0.243859] pinctrl-bcm2835 fe200000.gpio: write 38000000 (38 <= gpio_in) [ 0.243866] pinctrl-bcm2835 fe200000.gpio: read 38000000 (39 => alt3) [ 0.243872] pinctrl-bcm2835 fe200000.gpio: write 00000000 (39 <= gpio_in) [ 0.244016] sdhci-iproc fe340000.emmc2: GPIO lookup for consumer cd [ 0.244021] sdhci-iproc fe340000.emmc2: using device tree for GPIO lookup [ 0.244036] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/emmc2bus/emmc2@7e340000[0]' [ 0.244048] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/emmc2bus/emmc2@7e340000[0]' [ 0.244056] sdhci-iproc fe340000.emmc2: using lookup tables for GPIO lookup [ 0.244062] sdhci-iproc fe340000.emmc2: No GPIO consumer cd found [ 0.244069] sdhci-iproc fe340000.emmc2: GPIO lookup for consumer wp [ 0.244074] sdhci-iproc fe340000.emmc2: using device tree for GPIO lookup [ 0.244086] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/emmc2bus/emmc2@7e340000[0]' [ 0.244097] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/emmc2bus/emmc2@7e340000[0]' [ 0.244104] sdhci-iproc fe340000.emmc2: using lookup tables for GPIO lookup [ 0.244110] sdhci-iproc fe340000.emmc2: No GPIO consumer wp found [ 0.244276] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/act[0]' - status (0) [ 0.244291] pinctrl-bcm2835 fe200000.gpio: request pin 42 (gpio42) for pinctrl-bcm2835:42 [ 0.244300] pinctrl-bcm2835 fe200000.gpio: get 00000064 (42 => gpio_out) [ 0.244311] gpio gpiochip0: Persistence not supported for GPIO 42 [ 0.244316] no flags found for gpios [ 0.244333] pinctrl-bcm2835 fe200000.gpio: read 00000064 (42 => gpio_out) [ 0.244416] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/pwr[0]' - status (0) [ 0.244503] no flags found for gpios [ 0.250097] vchiq: vchiq_init_state: slot_zero = (ptrval) [ 0.251697] NET: Registered protocol family 10 [ 0.252125] Segment Routing with IPv6 [ 0.252171] fullmesh registered [ 0.252176] ndiffports registered [ 0.252183] binder registered [ 0.252198] netlink registered [ 0.252203] roundrobin registered [ 0.252207] redundant registered [ 0.252210] blest registered [ 0.252214] ecf registered [ 0.252219] NET: Registered protocol family 17 [ 0.252238] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.252246] 8021q: 802.1Q VLAN Support v1.8 [ 0.252489] Key type ._fscrypt registered [ 0.252495] Key type .fscrypt registered [ 0.255219] pinctrl core: add 0 pinctrl maps [ 0.255267] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 0.255315] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 14, base_baud = 0) is a PL011 rev2 [ 0.591793] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 0.594173] printk: console [ttyAMA0] enabled [ 0.745913] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 0.747842] reg-fixed-voltage sd_vcc_reg: GPIO lookup for consumer (null) [ 0.755574] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 0.762871] reg-fixed-voltage sd_vcc_reg: using device tree for GPIO lookup [ 0.769388] usb 1-1: Product: USB2.0 Hub [ 0.776084] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/sd_vcc_reg[0]' [ 0.787620] usb 1-1: no of_node; not parsing pinctrl DT [ 0.791477] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sd_vcc_reg[0]' - status (0) [ 0.798643] hub 1-1:1.0: no of_node; not parsing pinctrl DT [ 0.805423] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer (null) [ 0.811123] hub 1-1:1.0: USB hub found [ 0.818075] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup [ 0.827304] hub 1-1:1.0: 4 ports detected [ 0.835198] of_get_named_gpiod_flags: parsed 'gpios' property of node '/sd_io_1v8_reg[0]' - status (0) [ 1.135791] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd [ 1.142533] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer enable [ 1.248271] usb 1-1.1: New USB device found, idVendor=2357, idProduct=0106, bcdDevice= 0.00 [ 1.250779] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup [ 1.255212] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.258866] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/sd_io_1v8_reg[0]' [ 1.261994] usb 1-1.1: Product: 802.11ac NIC [ 1.265301] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/sd_io_1v8_reg[0]' [ 1.268254] usb 1-1.1: Manufacturer: Realtek [ 1.268256] usb 1-1.1: SerialNumber: 123456 [ 1.271299] gpio-regulator sd_io_1v8_reg: using lookup tables for GPIO lookup [ 1.274686] usb 1-1.1: no of_node; not parsing pinctrl DT [ 1.277820] gpio-regulator sd_io_1v8_reg: No GPIO consumer enable found [ 1.278175] bcm2835-power bcm2835-power: no of_node; not parsing pinctrl DT [ 1.400986] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.408273] pinctrl core: add 12 pinctrl maps [ 1.408283] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34 [ 1.408292] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35 [ 1.408298] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36 [ 1.408303] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37 [ 1.408308] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38 [ 1.408313] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39 [ 1.408319] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr [ 1.408323] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in) [ 1.408326] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3) [ 1.408330] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr [ 1.408333] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in) [ 1.408336] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3) [ 1.408339] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr [ 1.408341] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in) [ 1.408344] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3) [ 1.408347] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr [ 1.408350] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in) [ 1.408352] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3) [ 1.408355] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr [ 1.408358] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in) [ 1.408360] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3) [ 1.408363] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr [ 1.408366] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in) [ 1.408369] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3) [ 1.408446] mmc-bcm2835 fe300000.mmcnr: GPIO lookup for consumer wp [ 1.408448] mmc-bcm2835 fe300000.mmcnr: using device tree for GPIO lookup [ 1.408455] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmcnr@7e300000[0]' [ 1.408460] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmcnr@7e300000[0]' [ 1.408464] mmc-bcm2835 fe300000.mmcnr: using lookup tables for GPIO lookup [ 1.408467] mmc-bcm2835 fe300000.mmcnr: No GPIO consumer wp found [ 1.408488] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.414493] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.445697] sdhci-iproc fe340000.emmc2: GPIO lookup for consumer cd [ 1.445703] sdhci-iproc fe340000.emmc2: using device tree for GPIO lookup [ 1.445718] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/emmc2bus/emmc2@7e340000[0]' [ 1.445730] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/emmc2bus/emmc2@7e340000[0]' [ 1.445739] sdhci-iproc fe340000.emmc2: using lookup tables for GPIO lookup [ 1.445745] sdhci-iproc fe340000.emmc2: No GPIO consumer cd found [ 1.445752] sdhci-iproc fe340000.emmc2: GPIO lookup for consumer wp [ 1.445758] sdhci-iproc fe340000.emmc2: using device tree for GPIO lookup [ 1.445770] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/emmc2bus/emmc2@7e340000[0]' [ 1.445781] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/emmc2bus/emmc2@7e340000[0]' [ 1.445788] sdhci-iproc fe340000.emmc2: using lookup tables for GPIO lookup [ 1.445794] sdhci-iproc fe340000.emmc2: No GPIO consumer wp found [ 1.466971] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.473979] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.480983] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.486497] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 1.494461] of_cfs_init [ 1.496963] of_cfs_init: OK [ 1.500442] Waiting for root device /dev/mmcblk0p2... [ 1.507631] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.514587] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.530507] random: fast init done [ 1.615429] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 1.622016] mmcblk mmc0:aaaa: no of_node; not parsing pinctrl DT [ 1.622399] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 1.628406] mmc1: new high speed SDIO card at address 0001 [ 1.633942] mmcblk mmc1:0001: no of_node; not parsing pinctrl DT [ 1.634047] mmcblk0: p1 p2 [ 1.659829] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 1.667375] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.676682] devtmpfs: mounted [ 1.679933] Freeing unused kernel memory: 512K [ 1.684432] Run /sbin/init as init process [ 1.751406] init: Console is alive [ 1.754896] init: - watchdog - [ 2.314349] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 2.329850] pps_core: LinuxPPS API ver. 1 registered [ 2.334840] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 2.348355] PTP clock support registered [ 2.360414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.368069] ehci-fsl: Freescale EHCI Host controller driver [ 2.374074] ehci-platform: EHCI generic platform driver [ 2.388717] libata version 3.00 loaded. [ 2.392252] uhci_hcd: USB Universal Host Controller Interface driver [ 2.400116] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 2.408881] init: - preinit - [ 2.885743] bcmgenet: Skipping UMAC reset [ 2.891074] bcmgenet fd580000.ethernet: configuring instance for external RGMII [ 2.898840] bcmgenet fd580000.ethernet eth0: Link is Down [ 6.949852] mount_root: mounting /dev/root [ 6.958050] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.963627] mount_root: loading kmods from internal overlay [ 6.990828] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 6.998599] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 7.067177] block: attempting to load /etc/config/fstab [ 7.075375] block: extroot: not configured [ 7.082595] random: procd: uninitialized urandom read (4 bytes read) [ 7.106863] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.117808] urandom-seed: Seeding with /etc/urandom.seed [ 7.161914] procd: - early - [ 7.164878] procd: - watchdog - [ 7.215611] random: jshn: uninitialized urandom read (4 bytes read) [ 7.262763] random: jshn: uninitialized urandom read (4 bytes read) [ 7.679818] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd [ 7.694585] procd: - watchdog - [ 7.697876] procd: - ubus - [ 7.751226] procd: - init - [ 7.757297] uart-pl011 fe201000.serial: no DMA platform data [ 7.789106] usb 1-1.4: New USB device found, idVendor=12d1, idProduct=1f01, bcdDevice= 1.02 [ 7.797502] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.804820] usb 1-1.4: Product: HUAWEI Mobile [ 7.809177] usb 1-1.4: Manufacturer: HUAWEI [ 7.813361] usb 1-1.4: SerialNumber: FFFFFFFFFFFFFFFF [ 7.818834] usb 1-1.4: no of_node; not parsing pinctrl DT [ 7.828834] uas 1-1.4:1.0: no of_node; not parsing pinctrl DT [ 7.828881] usb-storage 1-1.4:1.0: no of_node; not parsing pinctrl DT [ 7.828895] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 7.835395] scsi host0: usb-storage 1-1.4:1.0 [ 7.875481] urngd: v1.0.2 started. [ 7.894848] random: crng init done [ 7.898273] random: 7 urandom warning(s) missed due to ratelimiting [ 7.967004] kmodloader: loading kernel modules from /etc/modules.d/* [ 7.990457] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 7.990457] originally by Donald Becker becker@scyld.com [ 7.990457] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 8.011963] zram: Added device: zram0 [ 8.018882] NET: Registered protocol family 8 [ 8.023297] NET: Registered protocol family 20 [ 8.034677] NET: Registered protocol family 15 [ 8.040405] Initializing XFRM netlink socket [ 8.049941] Modular ISDN core version 1.1.29 [ 8.054421] NET: Registered protocol family 34 [ 8.059729] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 8.065267] 0 virtual devices registered [ 8.070987] DSP module 2.0 [ 8.073726] mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies. [ 8.099295] tun: Universal TUN/TAP device driver, 1.6 [ 8.107888] mISDN: HFC-multi driver 2.03 [ 8.131596] sctp: Hash tables configured (bind 256/256) [ 8.140796] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.148344] nat46: module (version 71e9f0941a666c7010bb6d31d45bb795439038fa) loaded. [ 8.159287] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 8.166381] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 8.176007] VMware vmxnet3 virtual NIC driver - version 1.4.17.0-k-NAPI [ 8.185762] gre: GRE over IPv4 demultiplexor driver [ 8.191589] ip_gre: GRE over IPv4 tunneling driver [ 8.200624] ip6_gre: GRE over IPv6 tunneling driver [ 8.235573] i2c /dev entries driver [ 8.247116] hidraw: raw HID events driver (C) Jiri Kosina [ 8.255702] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 8.269965] Mirror/redirect action on [ 8.279176] u32 classifier [ 8.281935] input device check on [ 8.285612] Actions configured [ 8.295167] GACT probability on [ 8.299877] Simple TC action Loaded [ 8.314426] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 8.382426] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 8.387861] Copyright (c) 2007 Atheros Corporation. [ 8.395765] usbcore: registered new interface driver cdc_acm [ 8.401467] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 8.410178] usbcore: registered new interface driver cdc_wdm [ 8.416280] Loading modules backported from Linux version v5.8-0-gbcf876870b95 [ 8.423525] Backport generated by backports.git v5.8-1-0-g79400d9e [ 8.431581] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 8.437699] e100: Copyright(c) 1999-2006 Intel Corporation [ 8.448750] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 8.454628] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 8.467289] hso: drivers/net/usb/hso.c: Option Wireless [ 8.472600] usbcore: registered new interface driver hso [ 8.479879] usbcore: registered new interface driver ipheth [ 8.489196] usbcore: registered new interface driver kaweth [ 8.496724] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 8.534619] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 8.542233] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 8.549723] usbcore: registered new interface driver pegasus [ 8.557152] usbcore: registered new interface driver r8152 [ 8.567203] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 8.578773] usbcore: registered new interface driver r8712u [ 8.585286] usbcore: registered new interface driver rtl8150 [ 8.593007] sis900.c: v1.08.10 Apr. 2 2006 [ 8.598832] sky2: driver version 1.30 [ 8.604293] Solos PCI Driver Version 1.04 [ 8.610121] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 8.616854] tulip: tulip: unknown CPU architecture, using default csr0 [ 8.625044] usbcore: registered new interface driver usbhid [ 8.630641] usbhid: USB HID core driver [ 8.638074] usbcore: registered new interface driver usbserial_generic [ 8.644676] usbserial: USB Serial support registered for generic [ 8.651561] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker [ 8.659738] usbcore: registered new interface driver visor [ 8.665276] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 8.672978] usbserial: USB Serial support registered for Sony Clie 5.0 [ 8.679552] usbserial: USB Serial support registered for Sony Clie 3.5 [ 8.777086] xt_ndpi v1.2 ndpi 3.3.0 IPv6=YES debug_message=no [ 8.777086] BT: hash_size 0k, hash_expiation 0 sec, log_size 128kb [ 8.777086] sizeof hash_ip4p_node=44 id_struct=296 [ 8.777086] flow_struct=2248 packet_struct=1400 [ 8.777086] flow_tcp_struct=96 flow_udp_struct=40 int_one_line_struct=16 [ 8.777086] ndpi_ip_addr_t=16 ndpi_protocol=4 nf_ct_ext_ndpi=176 [ 8.777086] flow_info=112 spinlock_t=4 NF_EXT_ID 7 [ 8.816587] xt_ndpi: MAX_PROTOCOLS 320 LAST_PROTOCOL 252 [ 8.821906] xt_ndpi: flow acctounting OFF [ 8.830517] xt_time: kernel timezone is -0000 [ 8.835428] usbcore: registered new interface driver ark3116 [ 8.841158] usbserial: USB Serial support registered for ark3116 [ 8.848503] usbcore: registered new interface driver asix [ 8.854713] usbcore: registered new interface driver ax88179_178a [ 8.861338] usbcore: registered new interface driver belkin_sa [ 8.867239] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 8.877074] usbcore: registered new interface driver cdc_eem [ 8.881332] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 8.891113] sd 0:0:0:0: no of_node; not parsing pinctrl DT [ 8.891448] usbcore: registered new interface driver cdc_ether [ 8.898667] usbcore: registered new interface driver cdc_ncm [ 8.905022] usbcore: registered new interface driver cdc_subset [ 8.931825] usbcore: registered new interface driver ch341 [ 8.937379] usbserial: USB Serial support registered for ch341-uart [ 8.944471] usbcore: registered new interface driver cp210x [ 8.950130] usbserial: USB Serial support registered for cp210x [ 8.956926] usbcore: registered new interface driver cypress_m8 [ 8.962914] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 8.970190] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 8.977538] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 8.985749] usbcore: registered new interface driver dm9601 [ 8.993612] usbcore: registered new interface driver ftdi_sio [ 8.999420] usbserial: USB Serial support registered for FTDI USB Serial Device [ 9.007477] usbcore: registered new interface driver garmin_gps [ 9.013452] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 9.021106] usbcore: registered new interface driver huawei_cdc_ncm [ 9.028458] usbcore: registered new interface driver kalmia [ 9.034790] usbcore: registered new interface driver keyspan [ 9.040512] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 9.048391] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 9.055748] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 9.063100] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 9.102910] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 9.110916] usbcore: registered new interface driver mct_u232 [ 9.116746] usbserial: USB Serial support registered for MCT U232 [ 9.124197] usbcore: registered new interface driver mos7720 [ 9.129914] usbserial: USB Serial support registered for Moschip 2 port adapter [ 9.138711] usbcore: registered new interface driver mt7601u [ 9.145158] usbcore: registered new interface driver oti6858 [ 9.150896] usbserial: USB Serial support registered for oti6858 [ 9.157656] usbcore: registered new interface driver pl2303 [ 9.163288] usbserial: USB Serial support registered for pl2303 [ 9.170985] PPP generic driver version 2.4.2 [ 9.176199] NET: Registered protocol family 24 [ 9.181657] usbcore: registered new interface driver qmi_wwan [ 9.209081] RTL8723BS: module init start [ 9.213021] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40 [ 9.220068] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40 [ 9.226632] RTL8723BS: module init ret =0 [ 9.231974] usbcore: registered new interface driver rndis_host [ 9.244133] usbcore: registered new interface driver rtl8187 [ 9.326525] RTL871X: module init start [ 9.330285] RTL871X: rtl8812au v4.3.14_13455.20150212_BTCOEX20150128-51 [ 9.336895] RTL871X: rtl8812au BT-Coex version = BTCOEX20150128-51 [ 9.343168] usbcore: registered new interface driver rtl8812au [ 9.349009] RTL871X: module init ret=0 [ 9.355730] usbcore: registered new interface driver rtl8xxxu [ 9.372407] usbcore: registered new interface driver sierra [ 9.378052] usbserial: USB Serial support registered for Sierra USB modem [ 9.385990] usbcore: registered new interface driver sierra_net [ 9.393093] usbcore: registered new interface driver smsc75xx [ 9.399910] usbcore: registered new interface driver smsc95xx [ 9.406465] usbcore: registered new interface driver sr9700 [ 9.412897] usbcore: registered new interface driver ti_usb_3410_5052 [ 9.419414] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 9.427120] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 9.435460] usbcore: registered new interface driver usb_serial_simple [ 9.442037] usbserial: USB Serial support registered for carelink [ 9.448188] usbserial: USB Serial support registered for zio [ 9.453900] usbserial: USB Serial support registered for funsoft [ 9.459950] usbserial: USB Serial support registered for flashloader [ 9.466355] usbserial: USB Serial support registered for google [ 9.472316] usbserial: USB Serial support registered for libtransistor [ 9.478898] usbserial: USB Serial support registered for vivopay [ 9.484956] usbserial: USB Serial support registered for moto_modem [ 9.491274] usbserial: USB Serial support registered for motorola_tetra [ 9.497937] usbserial: USB Serial support registered for novatel_gps [ 9.504330] usbserial: USB Serial support registered for hp4x [ 9.510145] usbserial: USB Serial support registered for suunto [ 9.516110] usbserial: USB Serial support registered for siemens_mpi [ 9.554281] brcmfmac mmc1:0001:1: no of_node; not parsing pinctrl DT [ 9.554382] brcmfmac mmc1:0001:2: no of_node; not parsing pinctrl DT [ 9.558168] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.727250] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.747875] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43 [ 9.792655] brcmfmac mmc1:0001:3: no of_node; not parsing pinctrl DT [ 9.792763] usbcore: registered new interface driver brcmfmac [ 9.802779] usbcore: registered new interface driver cdc_mbim [ 9.809423] usbcore: registered new interface driver ipw [ 9.814824] usbserial: USB Serial support registered for IPWireless converter [ 9.822816] usbcore: registered new interface driver option [ 9.828454] usbserial: USB Serial support registered for GSM modem (1-port) [ 9.837602] usbcore: registered new interface driver qcserial [ 9.843447] usbserial: USB Serial support registered for Qualcomm USB modem [ 9.855760] usbcore: registered new interface driver rt2800usb [ 9.869811] usbcore: registered new interface driver rtl8192cu [ 9.904064] kmodloader: done loading kernel modules from /etc/modules.d/* [ 10.531109] usb 1-1.4: USB disconnect, device number 4 [ 10.759829] usb 1-1.4: new high-speed USB device number 5 using xhci_hcd [ 10.869096] usb 1-1.4: New USB device found, idVendor=12d1, idProduct=14db, bcdDevice= 1.02 [ 10.877598] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.884943] usb 1-1.4: Product: HUAWEI Mobile [ 10.889310] usb 1-1.4: Manufacturer: HUAWEI [ 10.894248] usb 1-1.4: no of_node; not parsing pinctrl DT [ 10.953010] cdc_ether 1-1.4:1.0: no of_node; not parsing pinctrl DT [ 10.987330] cdc_ether 1-1.4:1.0 eth1: register 'cdc_ether' at usb-0000:01:00.0-1.4, CDC Ethernet Device, 00:1e:10:1f:00:00 [ 12.105380] bcmgenet: Skipping UMAC reset [ 12.111141] bcmgenet fd580000.ethernet: configuring instance for external RGMII [ 12.119051] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.127433] IPv6: ADDRCONF(NETDEVCHANGE): eth0: link becomes ready

Ysurac / openmptcprouter