cooper1025
commented
1 year ago kernel log:
root@OpenMPTCProuter:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.15.86 (runner@fv-az565-298) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.2.0 r0+21757-895f38ca1e) 12.2.0, GNU ld (GNU Binutils) 2.39) #0 SMP Tue Jan 10 23:05:18 2023
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.1
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 17 pages/cpu s32088 r8192 d29352 u69632
[ 0.000000] pcpu-alloc: s32088 r8192 d29352 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:E5:A0:3C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 coherent_pool=8M root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rw rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 3826456K/4050944K available (8256K kernel code, 928K rwdata, 2064K rodata, 448K init, 557K bss, 158952K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000218] Console: colour dummy device 80x25
[ 0.000504] printk: console [tty1] enabled
[ 0.000546] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.000571] pid_max: default: 32768 minimum: 301
[ 0.000783] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000866] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001451] cgroup: Disabling memory control group subsystem
[ 0.002606] rcu: Hierarchical SRCU implementation.
[ 0.002807] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.003361] smp: Bringing up secondary CPUs ...
[ 0.003830] Detected PIPT I-cache on CPU1
[ 0.003897] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.004430] Detected PIPT I-cache on CPU2
[ 0.004472] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.004964] Detected PIPT I-cache on CPU3
[ 0.005007] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.005082] smp: Brought up 1 node, 4 CPUs
[ 0.005142] SMP: Total of 4 processors activated.
[ 0.005154] CPU features: detected: 32-bit EL0 Support
[ 0.005168] CPU features: detected: CRC32 instructions
[ 0.005242] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.005262] CPU: All CPU(s) started at EL2
[ 0.005292] alternatives: patching kernel code
[ 0.006274] devtmpfs: initialized
[ 0.013946] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014003] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.015448] pinctrl core: initialized pinctrl subsystem
[ 0.015754] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT
[ 0.016729] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.018402] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.019162] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.019949] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.020384] thermal_sys: Registered thermal governor 'step_wise'
[ 0.020522] cpuidle: using governor ladder
[ 0.020561] cpuidle: using governor menu
[ 0.020767] ASID allocator initialised with 65536 entries
[ 0.020867] Serial: AMBA PL011 UART driver
[ 0.024985] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.039963] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-19T12:27:01, variant start
[ 0.049964] raspberrypi-firmware soc:firmware: Firmware hash is ef2c018dccdeb94b0376db62a2ea4c882f9b500d
[ 0.081777] cryptd: max_cpu_qlen set to 1000
[ 0.083628] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.084618] reg-fixed-voltage sd_vcc_reg: GPIO lookup for consumer (null)
[ 0.084630] reg-fixed-voltage sd_vcc_reg: using device tree for GPIO lookup
[ 0.084647] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/sd_vcc_reg[0]'
[ 0.084675] reg-fixed-voltage sd_vcc_reg: No GPIO consumer (null) found
[ 0.084753] reg-fixed-voltage cam1_regulator: GPIO lookup for consumer (null)
[ 0.084762] reg-fixed-voltage cam1_regulator: using device tree for GPIO lookup
[ 0.084774] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/cam1_regulator[0]'
[ 0.084797] reg-fixed-voltage cam1_regulator: No GPIO consumer (null) found
[ 0.084865] reg-fixed-voltage cam_dummy_reg: GPIO lookup for consumer (null)
[ 0.084873] reg-fixed-voltage cam_dummy_reg: using device tree for GPIO lookup
[ 0.084885] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/cam_dummy_reg[0]'
[ 0.084903] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/cam_dummy_reg[0]'
[ 0.084918] reg-fixed-voltage cam_dummy_reg: using lookup tables for GPIO lookup
[ 0.084926] reg-fixed-voltage cam_dummy_reg: No GPIO consumer (null) found
[ 0.085126] reg-fixed-voltage fixedregulator_3v3: GPIO lookup for consumer (null)
[ 0.085135] reg-fixed-voltage fixedregulator_3v3: using device tree for GPIO lookup
[ 0.085147] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator_3v3[0]'
[ 0.085165] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_3v3[0]'
[ 0.085181] reg-fixed-voltage fixedregulator_3v3: using lookup tables for GPIO lookup
[ 0.085188] reg-fixed-voltage fixedregulator_3v3: No GPIO consumer (null) found
[ 0.085369] reg-fixed-voltage fixedregulator_5v0: GPIO lookup for consumer (null)
[ 0.085378] reg-fixed-voltage fixedregulator_5v0: using device tree for GPIO lookup
[ 0.085389] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator_5v0[0]'
[ 0.085407] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_5v0[0]'
[ 0.085422] reg-fixed-voltage fixedregulator_5v0: using lookup tables for GPIO lookup
[ 0.085429] reg-fixed-voltage fixedregulator_5v0: No GPIO consumer (null) found
[ 0.085688] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer (null)
[ 0.085697] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup
[ 0.085713] gpio-regulator sd_io_1v8_reg: No GPIO consumer (null) found
[ 0.085991] SCSI subsystem initialized
[ 0.086135] usbcore: registered new interface driver usbfs
[ 0.086179] usbcore: registered new interface driver hub
[ 0.086220] usbcore: registered new device driver usb
[ 0.086298] usb_phy_generic phy: GPIO lookup for consumer reset
[ 0.086307] usb_phy_generic phy: using device tree for GPIO lookup
[ 0.086320] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/phy[0]'
[ 0.086340] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/phy[0]'
[ 0.086356] usb_phy_generic phy: using lookup tables for GPIO lookup
[ 0.086363] usb_phy_generic phy: No GPIO consumer reset found
[ 0.086370] usb_phy_generic phy: GPIO lookup for consumer vbus-detect
[ 0.086377] usb_phy_generic phy: using device tree for GPIO lookup
[ 0.086388] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/phy[0]'
[ 0.086405] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/phy[0]'
[ 0.086419] usb_phy_generic phy: using lookup tables for GPIO lookup
[ 0.086426] usb_phy_generic phy: No GPIO consumer vbus-detect found
[ 0.086450] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.086563] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.087774] clocksource: Switched to clocksource arch_sys_counter
[ 0.093300] NET: Registered PF_INET protocol family
[ 0.093913] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.096675] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.096738] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.096763] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.096996] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.097514] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.097986] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.098108] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.098182] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.098420] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.098459] PCI: CLS 0 bytes, default 64
[ 0.102283] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.106509] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.169633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.170868] pinctrl-bcm2835 fe200000.gpio: try to register 58 pins ...
[ 0.170883] pinctrl core: registered pin 0 (gpio0) on pinctrl-bcm2711
[ 0.170893] pinctrl core: registered pin 1 (gpio1) on pinctrl-bcm2711
[ 0.170900] pinctrl core: registered pin 2 (gpio2) on pinctrl-bcm2711
[ 0.170907] pinctrl core: registered pin 3 (gpio3) on pinctrl-bcm2711
[ 0.170915] pinctrl core: registered pin 4 (gpio4) on pinctrl-bcm2711
[ 0.170921] pinctrl core: registered pin 5 (gpio5) on pinctrl-bcm2711
[ 0.170927] pinctrl core: registered pin 6 (gpio6) on pinctrl-bcm2711
[ 0.170933] pinctrl core: registered pin 7 (gpio7) on pinctrl-bcm2711
[ 0.170939] pinctrl core: registered pin 8 (gpio8) on pinctrl-bcm2711
[ 0.170945] pinctrl core: registered pin 9 (gpio9) on pinctrl-bcm2711
[ 0.170951] pinctrl core: registered pin 10 (gpio10) on pinctrl-bcm2711
[ 0.170959] pinctrl core: registered pin 11 (gpio11) on pinctrl-bcm2711
[ 0.170966] pinctrl core: registered pin 12 (gpio12) on pinctrl-bcm2711
[ 0.170972] pinctrl core: registered pin 13 (gpio13) on pinctrl-bcm2711
[ 0.170978] pinctrl core: registered pin 14 (gpio14) on pinctrl-bcm2711
[ 0.170984] pinctrl core: registered pin 15 (gpio15) on pinctrl-bcm2711
[ 0.170994] pinctrl core: registered pin 16 (gpio16) on pinctrl-bcm2711
[ 0.171000] pinctrl core: registered pin 17 (gpio17) on pinctrl-bcm2711
[ 0.171006] pinctrl core: registered pin 18 (gpio18) on pinctrl-bcm2711
[ 0.171013] pinctrl core: registered pin 19 (gpio19) on pinctrl-bcm2711
[ 0.171019] pinctrl core: registered pin 20 (gpio20) on pinctrl-bcm2711
[ 0.171025] pinctrl core: registered pin 21 (gpio21) on pinctrl-bcm2711
[ 0.171031] pinctrl core: registered pin 22 (gpio22) on pinctrl-bcm2711
[ 0.171037] pinctrl core: registered pin 23 (gpio23) on pinctrl-bcm2711
[ 0.171043] pinctrl core: registered pin 24 (gpio24) on pinctrl-bcm2711
[ 0.171050] pinctrl core: registered pin 25 (gpio25) on pinctrl-bcm2711
[ 0.171056] pinctrl core: registered pin 26 (gpio26) on pinctrl-bcm2711
[ 0.171062] pinctrl core: registered pin 27 (gpio27) on pinctrl-bcm2711
[ 0.171068] pinctrl core: registered pin 28 (gpio28) on pinctrl-bcm2711
[ 0.171074] pinctrl core: registered pin 29 (gpio29) on pinctrl-bcm2711
[ 0.171080] pinctrl core: registered pin 30 (gpio30) on pinctrl-bcm2711
[ 0.171086] pinctrl core: registered pin 31 (gpio31) on pinctrl-bcm2711
[ 0.171092] pinctrl core: registered pin 32 (gpio32) on pinctrl-bcm2711
[ 0.171098] pinctrl core: registered pin 33 (gpio33) on pinctrl-bcm2711
[ 0.171105] pinctrl core: registered pin 34 (gpio34) on pinctrl-bcm2711
[ 0.171111] pinctrl core: registered pin 35 (gpio35) on pinctrl-bcm2711
[ 0.171117] pinctrl core: registered pin 36 (gpio36) on pinctrl-bcm2711
[ 0.171123] pinctrl core: registered pin 37 (gpio37) on pinctrl-bcm2711
[ 0.171129] pinctrl core: registered pin 38 (gpio38) on pinctrl-bcm2711
[ 0.171135] pinctrl core: registered pin 39 (gpio39) on pinctrl-bcm2711
[ 0.171141] pinctrl core: registered pin 40 (gpio40) on pinctrl-bcm2711
[ 0.171148] pinctrl core: registered pin 41 (gpio41) on pinctrl-bcm2711
[ 0.171154] pinctrl core: registered pin 42 (gpio42) on pinctrl-bcm2711
[ 0.171160] pinctrl core: registered pin 43 (gpio43) on pinctrl-bcm2711
[ 0.171166] pinctrl core: registered pin 44 (gpio44) on pinctrl-bcm2711
[ 0.171173] pinctrl core: registered pin 45 (gpio45) on pinctrl-bcm2711
[ 0.171179] pinctrl core: registered pin 46 (gpio46) on pinctrl-bcm2711
[ 0.171185] pinctrl core: registered pin 47 (gpio47) on pinctrl-bcm2711
[ 0.171193] pinctrl core: registered pin 48 (gpio48) on pinctrl-bcm2711
[ 0.171200] pinctrl core: registered pin 49 (gpio49) on pinctrl-bcm2711
[ 0.171206] pinctrl core: registered pin 50 (gpio50) on pinctrl-bcm2711
[ 0.171212] pinctrl core: registered pin 51 (gpio51) on pinctrl-bcm2711
[ 0.171219] pinctrl core: registered pin 52 (gpio52) on pinctrl-bcm2711
[ 0.171225] pinctrl core: registered pin 53 (gpio53) on pinctrl-bcm2711
[ 0.171231] pinctrl core: registered pin 54 (gpio54) on pinctrl-bcm2711
[ 0.171237] pinctrl core: registered pin 55 (gpio55) on pinctrl-bcm2711
[ 0.171243] pinctrl core: registered pin 56 (gpio56) on pinctrl-bcm2711
[ 0.171249] pinctrl core: registered pin 57 (gpio57) on pinctrl-bcm2711
[ 0.171260] pinctrl-bcm2835 fe200000.gpio: no hogs found
[ 0.171426] gpio gpiochip0: (pinctrl-bcm2711): created GPIO range 0->57 ==> fe200000.gpio PIN 0->57
[ 0.171581] pinctrl-bcm2835 fe200000.gpio: get 00000000 (0 => gpio_in)
[ 0.171592] pinctrl-bcm2835 fe200000.gpio: get 00000000 (1 => gpio_in)
[ 0.171602] pinctrl-bcm2835 fe200000.gpio: get 00000000 (2 => gpio_in)
[ 0.171611] pinctrl-bcm2835 fe200000.gpio: get 00000000 (3 => gpio_in)
[ 0.171620] pinctrl-bcm2835 fe200000.gpio: get 00000000 (4 => gpio_in)
[ 0.171629] pinctrl-bcm2835 fe200000.gpio: get 00000000 (5 => gpio_in)
[ 0.171637] pinctrl-bcm2835 fe200000.gpio: get 00000000 (6 => gpio_in)
[ 0.171646] pinctrl-bcm2835 fe200000.gpio: get 00000000 (7 => gpio_in)
[ 0.171654] pinctrl-bcm2835 fe200000.gpio: get 00000000 (8 => gpio_in)
[ 0.171662] pinctrl-bcm2835 fe200000.gpio: get 00000000 (9 => gpio_in)
[ 0.171670] pinctrl-bcm2835 fe200000.gpio: get 00024000 (10 => gpio_in)
[ 0.171680] pinctrl-bcm2835 fe200000.gpio: get 00024000 (11 => gpio_in)
[ 0.171688] pinctrl-bcm2835 fe200000.gpio: get 00024000 (12 => gpio_in)
[ 0.171697] pinctrl-bcm2835 fe200000.gpio: get 00024000 (13 => gpio_in)
[ 0.171705] pinctrl-bcm2835 fe200000.gpio: get 00024000 (14 => alt0)
[ 0.171714] pinctrl-bcm2835 fe200000.gpio: get 00024000 (15 => alt0)
[ 0.171722] pinctrl-bcm2835 fe200000.gpio: get 00024000 (16 => gpio_in)
[ 0.171731] pinctrl-bcm2835 fe200000.gpio: get 00024000 (17 => gpio_in)
[ 0.171739] pinctrl-bcm2835 fe200000.gpio: get 00024000 (18 => gpio_in)
[ 0.171748] pinctrl-bcm2835 fe200000.gpio: get 00024000 (19 => gpio_in)
[ 0.171756] pinctrl-bcm2835 fe200000.gpio: get 12000000 (20 => gpio_in)
[ 0.171765] pinctrl-bcm2835 fe200000.gpio: get 12000000 (21 => gpio_in)
[ 0.171773] pinctrl-bcm2835 fe200000.gpio: get 12000000 (22 => gpio_in)
[ 0.171782] pinctrl-bcm2835 fe200000.gpio: get 12000000 (23 => gpio_in)
[ 0.171790] pinctrl-bcm2835 fe200000.gpio: get 12000000 (24 => gpio_in)
[ 0.171799] pinctrl-bcm2835 fe200000.gpio: get 12000000 (25 => gpio_in)
[ 0.171807] pinctrl-bcm2835 fe200000.gpio: get 12000000 (26 => gpio_in)
[ 0.171816] pinctrl-bcm2835 fe200000.gpio: get 12000000 (27 => gpio_in)
[ 0.171824] pinctrl-bcm2835 fe200000.gpio: get 12000000 (28 => alt5)
[ 0.171833] pinctrl-bcm2835 fe200000.gpio: get 12000000 (29 => alt5)
[ 0.171841] pinctrl-bcm2835 fe200000.gpio: get 00000000 (30 => gpio_in)
[ 0.171850] pinctrl-bcm2835 fe200000.gpio: get 00000000 (31 => gpio_in)
[ 0.171858] pinctrl-bcm2835 fe200000.gpio: get 00000000 (32 => gpio_in)
[ 0.171866] pinctrl-bcm2835 fe200000.gpio: get 00000000 (33 => gpio_in)
[ 0.171874] pinctrl-bcm2835 fe200000.gpio: get 00000000 (34 => gpio_in)
[ 0.171883] pinctrl-bcm2835 fe200000.gpio: get 00000000 (35 => gpio_in)
[ 0.171891] pinctrl-bcm2835 fe200000.gpio: get 00000000 (36 => gpio_in)
[ 0.171900] pinctrl-bcm2835 fe200000.gpio: get 00000000 (37 => gpio_in)
[ 0.171908] pinctrl-bcm2835 fe200000.gpio: get 00000000 (38 => gpio_in)
[ 0.171916] pinctrl-bcm2835 fe200000.gpio: get 00000000 (39 => gpio_in)
[ 0.171924] pinctrl-bcm2835 fe200000.gpio: get 24000040 (40 => gpio_in)
[ 0.171933] pinctrl-bcm2835 fe200000.gpio: get 24000040 (41 => gpio_in)
[ 0.171941] pinctrl-bcm2835 fe200000.gpio: get 24000040 (42 => gpio_out)
[ 0.171950] pinctrl-bcm2835 fe200000.gpio: get 24000040 (43 => gpio_in)
[ 0.171958] pinctrl-bcm2835 fe200000.gpio: get 24000040 (44 => gpio_in)
[ 0.171966] pinctrl-bcm2835 fe200000.gpio: get 24000040 (45 => gpio_in)
[ 0.171975] pinctrl-bcm2835 fe200000.gpio: get 24000040 (46 => gpio_in)
[ 0.171983] pinctrl-bcm2835 fe200000.gpio: get 24000040 (47 => gpio_in)
[ 0.171992] pinctrl-bcm2835 fe200000.gpio: get 24000040 (48 => alt0)
[ 0.172000] pinctrl-bcm2835 fe200000.gpio: get 24000040 (49 => alt0)
[ 0.172008] pinctrl-bcm2835 fe200000.gpio: get 00000924 (50 => alt0)
[ 0.172017] pinctrl-bcm2835 fe200000.gpio: get 00000924 (51 => alt0)
[ 0.172025] pinctrl-bcm2835 fe200000.gpio: get 00000924 (52 => alt0)
[ 0.172034] pinctrl-bcm2835 fe200000.gpio: get 00000924 (53 => alt0)
[ 0.172042] pinctrl-bcm2835 fe200000.gpio: get 00000924 (54 => gpio_in)
[ 0.172050] pinctrl-bcm2835 fe200000.gpio: get 00000924 (55 => gpio_in)
[ 0.172058] pinctrl-bcm2835 fe200000.gpio: get 00000924 (56 => gpio_in)
[ 0.172067] pinctrl-bcm2835 fe200000.gpio: get 00000924 (57 => gpio_in)
[ 0.172254] gpio gpiochip0: (pinctrl-bcm2711): added GPIO chardev (254:0)
[ 0.172314] gpio gpiochip0: registered GPIOs 0 to 57 on pinctrl-bcm2711
[ 0.172949] gpiochip_find_base: found new base at 504
[ 0.173057] gpio gpiochip1: Persistence not supported for GPIO 3
[ 0.174353] gpio-507 (ant1): hogged as output/high
[ 0.174424] gpio gpiochip1: Persistence not supported for GPIO 7
[ 0.175713] gpio-511 (ant2): hogged as output/low
[ 0.179041] gpio gpiochip1: (raspberrypi-exp-gpio): added GPIO chardev (254:1)
[ 0.179103] gpio gpiochip1: registered GPIOs 504 to 511 on raspberrypi-exp-gpio
[ 0.179483] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.179514] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 0.179560] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 0.179602] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 0.777774] brcm-pcie fd500000.pcie: link down
[ 0.778019] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
[ 0.778040] bcm2708_fb: probe of soc:fb failed with error -2
[ 0.783433] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.783708] serial8250 serial8250: no of_node; not parsing pinctrl DT
[ 0.784345] iproc-rng200 fe104000.rng: hwrng registered
[ 0.784370] random: crng init done
[ 0.784471] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.785033] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 0.792956] brd: module loaded
[ 0.796455] loop: module loaded
[ 0.796811] bcm2835-power bcm2835-power: no of_node; not parsing pinctrl DT
[ 0.797125] Loading iSCSI transport class v2.0-870.
[ 0.798658] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 0.798672] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 0.798681] mdio_bus fixed-0: No GPIO consumer reset found
[ 0.799074] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 0.799590] mdio_bus unimac-mdio--19: GPIO lookup for consumer reset
[ 0.799600] mdio_bus unimac-mdio--19: using device tree for GPIO lookup
[ 0.799620] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/scb/ethernet@7d580000/mdio@e14[0]'
[ 0.799649] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/scb/ethernet@7d580000/mdio@e14[0]'
[ 0.799674] mdio_bus unimac-mdio--19: using lookup tables for GPIO lookup
[ 0.799682] mdio_bus unimac-mdio--19: No GPIO consumer reset found
[ 0.858180] mdio_bus unimac-mdio--19:00: GPIO lookup for consumer reset
[ 0.858191] mdio_bus unimac-mdio--19:00: using device tree for GPIO lookup
[ 0.858204] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/scb/ethernet@7d580000/mdio@e14/ethernet-phy@0[0]'
[ 0.858238] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/scb/ethernet@7d580000/mdio@e14/ethernet-phy@0[0]'
[ 0.858266] mdio_bus unimac-mdio--19:00: using lookup tables for GPIO lookup
[ 0.858273] mdio_bus unimac-mdio--19:00: No GPIO consumer reset found
[ 0.907831] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 0.908773] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.908868] dwc_otg: FIQ enabled
[ 0.908873] dwc_otg: NAK holdoff enabled
[ 0.908878] dwc_otg: FIQ split-transaction FSM enabled
[ 0.908885] Module dwc_common_port init
[ 0.909137] usbcore: registered new interface driver uas
[ 0.909185] usbcore: registered new interface driver usb-storage
[ 0.909341] mousedev: PS/2 mouse device common for all mice
[ 0.909715] bcm2835-wdt bcm2835-wdt: no of_node; not parsing pinctrl DT
[ 0.909911] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.910045] raspberrypi-cpufreq raspberrypi-cpufreq: no of_node; not parsing pinctrl DT
[ 0.910871] cpufreq-dt cpufreq-dt: no of_node; not parsing pinctrl DT
[ 0.911399] sdhci: Secure Digital Host Controller Interface driver
[ 0.911416] sdhci: Copyright(c) Pierre Ossman
[ 0.911495] pinctrl core: add 12 pinctrl maps
[ 0.911519] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34
[ 0.911541] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35
[ 0.911557] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36
[ 0.911572] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37
[ 0.911586] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38
[ 0.911601] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39
[ 0.911615] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr
[ 0.911627] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in)
[ 0.911637] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3)
[ 0.911647] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr
[ 0.911657] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in)
[ 0.911666] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3)
[ 0.911675] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr
[ 0.911684] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in)
[ 0.911693] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3)
[ 0.911702] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr
[ 0.911711] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in)
[ 0.911720] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3)
[ 0.911728] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr
[ 0.911737] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in)
[ 0.911746] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3)
[ 0.911755] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr
[ 0.911764] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in)
[ 0.911772] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3)
[ 0.912026] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 0.912284] pinctrl-bcm2835 fe200000.gpio: get 3ffff000 (34 => alt3)
[ 0.912297] pinctrl-bcm2835 fe200000.gpio: read 3ffff000 (34 => alt3)
[ 0.912307] pinctrl-bcm2835 fe200000.gpio: write 3fff8000 (34 <= gpio_in)
[ 0.912317] pinctrl-bcm2835 fe200000.gpio: get 3fff8000 (35 => alt3)
[ 0.912326] pinctrl-bcm2835 fe200000.gpio: read 3fff8000 (35 => alt3)
[ 0.912335] pinctrl-bcm2835 fe200000.gpio: write 3ffc0000 (35 <= gpio_in)
[ 0.912344] pinctrl-bcm2835 fe200000.gpio: get 3ffc0000 (36 => alt3)
[ 0.912352] pinctrl-bcm2835 fe200000.gpio: read 3ffc0000 (36 => alt3)
[ 0.912361] pinctrl-bcm2835 fe200000.gpio: write 3fe00000 (36 <= gpio_in)
[ 0.912370] pinctrl-bcm2835 fe200000.gpio: get 3fe00000 (37 => alt3)
[ 0.912378] pinctrl-bcm2835 fe200000.gpio: read 3fe00000 (37 => alt3)
[ 0.912386] pinctrl-bcm2835 fe200000.gpio: write 3f000000 (37 <= gpio_in)
[ 0.912395] pinctrl-bcm2835 fe200000.gpio: get 3f000000 (38 => alt3)
[ 0.912404] pinctrl-bcm2835 fe200000.gpio: read 3f000000 (38 => alt3)
[ 0.912412] pinctrl-bcm2835 fe200000.gpio: write 38000000 (38 <= gpio_in)
[ 0.912421] pinctrl-bcm2835 fe200000.gpio: get 38000000 (39 => alt3)
[ 0.912429] pinctrl-bcm2835 fe200000.gpio: read 38000000 (39 => alt3)
[ 0.912437] pinctrl-bcm2835 fe200000.gpio: write 00000000 (39 <= gpio_in)
[ 0.912585] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.912736] pinctrl core: add 12 pinctrl maps
[ 0.912756] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34
[ 0.912775] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35
[ 0.912792] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36
[ 0.912807] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37
[ 0.912821] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38
[ 0.912835] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39
[ 0.912848] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr
[ 0.912839] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led-act[0]' - status (0)
[ 0.912859] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in)
[ 0.912870] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3)
[ 0.912873] pinctrl-bcm2835 fe200000.gpio: request pin 42 (gpio42) for pinctrl-bcm2711:42
[ 0.912881] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr
[ 0.912885] pinctrl-bcm2835 fe200000.gpio: get 24000040 (42 => gpio_out)
[ 0.912891] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in)
[ 0.912900] gpio gpiochip0: Persistence not supported for GPIO 42
[ 0.912900] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3)
[ 0.912910] gpio-42 (?): no flags found for gpios
[ 0.912910] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr
[ 0.912919] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in)
[ 0.912927] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3)
[ 0.912928] pinctrl-bcm2835 fe200000.gpio: read 24000040 (42 => gpio_out)
[ 0.912938] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr
[ 0.912947] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in)
[ 0.912955] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3)
[ 0.912963] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr
[ 0.912972] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in)
[ 0.912979] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3)
[ 0.912988] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr
[ 0.912996] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in)
[ 0.913004] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3)
[ 0.913010] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led-pwr[0]' - status (0)
[ 0.913180] sdhci-iproc fe300000.mmcnr: GPIO lookup for consumer wp
[ 0.913189] sdhci-iproc fe300000.mmcnr: using device tree for GPIO lookup
[ 0.913207] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmcnr@7e300000[0]'
[ 0.913233] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmcnr@7e300000[0]'
[ 0.913253] sdhci-iproc fe300000.mmcnr: using lookup tables for GPIO lookup
[ 0.913261] sdhci-iproc fe300000.mmcnr: No GPIO consumer wp found
[ 0.913420] pinctrl-bcm2835 fe200000.gpio: get 3ffff000 (34 => alt3)
[ 0.913432] pinctrl-bcm2835 fe200000.gpio: read 3ffff000 (34 => alt3)
[ 0.913441] pinctrl-bcm2835 fe200000.gpio: write 3fff8000 (34 <= gpio_in)
[ 0.913457] pinctrl-bcm2835 fe200000.gpio: get 3fff8000 (35 => alt3)
[ 0.913466] pinctrl-bcm2835 fe200000.gpio: read 3fff8000 (35 => alt3)
[ 0.913474] pinctrl-bcm2835 fe200000.gpio: write 3ffc0000 (35 <= gpio_in)
[ 0.913483] pinctrl-bcm2835 fe200000.gpio: get 3ffc0000 (36 => alt3)
[ 0.913491] pinctrl-bcm2835 fe200000.gpio: read 3ffc0000 (36 => alt3)
[ 0.913499] pinctrl-bcm2835 fe200000.gpio: write 3fe00000 (36 <= gpio_in)
[ 0.913508] pinctrl-bcm2835 fe200000.gpio: get 3fe00000 (37 => alt3)
[ 0.913516] pinctrl-bcm2835 fe200000.gpio: read 3fe00000 (37 => alt3)
[ 0.913524] pinctrl-bcm2835 fe200000.gpio: write 3f000000 (37 <= gpio_in)
[ 0.913533] pinctrl-bcm2835 fe200000.gpio: get 3f000000 (38 => alt3)
[ 0.913541] pinctrl-bcm2835 fe200000.gpio: read 3f000000 (38 => alt3)
[ 0.913549] pinctrl-bcm2835 fe200000.gpio: write 38000000 (38 <= gpio_in)
[ 0.913557] pinctrl-bcm2835 fe200000.gpio: get 38000000 (39 => alt3)
[ 0.913566] pinctrl-bcm2835 fe200000.gpio: read 38000000 (39 => alt3)
[ 0.913574] pinctrl-bcm2835 fe200000.gpio: write 00000000 (39 <= gpio_in)
[ 0.913737] sdhci-iproc fe340000.mmc: GPIO lookup for consumer cd
[ 0.913746] sdhci-iproc fe340000.mmc: using device tree for GPIO lookup
[ 0.913759] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/emmc2bus/mmc@7e340000[0]'
[ 0.913782] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/emmc2bus/mmc@7e340000[0]'
[ 0.913802] sdhci-iproc fe340000.mmc: using lookup tables for GPIO lookup
[ 0.913809] sdhci-iproc fe340000.mmc: No GPIO consumer cd found
[ 0.913817] sdhci-iproc fe340000.mmc: GPIO lookup for consumer wp
[ 0.913824] sdhci-iproc fe340000.mmc: using device tree for GPIO lookup
[ 0.913835] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/emmc2bus/mmc@7e340000[0]'
[ 0.913856] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/emmc2bus/mmc@7e340000[0]'
[ 0.913874] sdhci-iproc fe340000.mmc: using lookup tables for GPIO lookup
[ 0.913880] sdhci-iproc fe340000.mmc: No GPIO consumer wp found
[ 0.915584] gpio gpiochip1: Persistence not supported for GPIO 2
[ 0.915588] gpio-506 (?): no flags found for gpios
[ 0.919448] NET: Registered PF_INET6 protocol family
[ 0.919965] Segment Routing with IPv6
[ 0.919982] In-situ OAM (IOAM) with IPv6
[ 0.920016] NET: Registered PF_PACKET protocol family
[ 0.920039] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.920048] 8021q: 802.1Q VLAN Support v1.8
[ 0.920405] Key type .fscrypt registered
[ 0.920413] Key type fscrypt-provisioning registered
[ 0.922952] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 0.923028] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 0.923054] uart-pl011 fe201000.serial: GPIO lookup for consumer rs485-term
[ 0.923058] uart-pl011 fe201000.serial: using device tree for GPIO lookup
[ 0.923066] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@7e201000[0]'
[ 0.923076] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@7e201000[0]'
[ 0.923085] uart-pl011 fe201000.serial: using lookup tables for GPIO lookup
[ 0.923089] uart-pl011 fe201000.serial: No GPIO consumer rs485-term found
[ 0.923122] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 17, base_baud = 0) is a PL011 rev2
[ 1.811675] printk: console [ttyAMA0] enabled
[ 1.816264] reg-fixed-voltage sd_vcc_reg: GPIO lookup for consumer (null)
[ 1.816268] reg-fixed-voltage sd_vcc_reg: using device tree for GPIO lookup
[ 1.816274] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/sd_vcc_reg[0]'
[ 1.816288] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sd_vcc_reg[0]' - status (0)
[ 1.816334] gpio gpiochip1: Persistence not supported for GPIO 6
[ 1.818047] reg-fixed-voltage cam1_regulator: GPIO lookup for consumer (null)
[ 1.818051] reg-fixed-voltage cam1_regulator: using device tree for GPIO lookup
[ 1.818058] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/cam1_regulator[0]'
[ 1.818068] of_get_named_gpiod_flags: parsed 'gpio' property of node '/cam1_regulator[0]' - status (0)
[ 1.818099] gpio gpiochip1: Persistence not supported for GPIO 5
[ 1.819454] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer (null)
[ 1.819458] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup
[ 1.819465] of_get_named_gpiod_flags: parsed 'gpios' property of node '/sd_io_1v8_reg[0]' - status (0)
[ 1.819495] gpio gpiochip1: Persistence not supported for GPIO 4
[ 1.820741] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer enable
[ 1.820745] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup
[ 1.820750] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/sd_io_1v8_reg[0]'
[ 1.820758] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/sd_io_1v8_reg[0]'
[ 1.820765] gpio-regulator sd_io_1v8_reg: using lookup tables for GPIO lookup
[ 1.820768] gpio-regulator sd_io_1v8_reg: No GPIO consumer enable found
[ 1.821160] bcm2835-power bcm2835-power: no of_node; not parsing pinctrl DT
[ 1.821234] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.828548] pinctrl core: add 12 pinctrl maps
[ 1.828559] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34
[ 1.828569] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35
[ 1.828575] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36
[ 1.828582] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37
[ 1.828587] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38
[ 1.828593] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39
[ 1.828600] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr
[ 1.828605] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in)
[ 1.828609] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3)
[ 1.828614] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr
[ 1.828618] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in)
[ 1.828622] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3)
[ 1.828625] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr
[ 1.828629] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in)
[ 1.828632] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3)
[ 1.828636] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr
[ 1.828640] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in)
[ 1.828644] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3)
[ 1.828647] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr
[ 1.828651] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in)
[ 1.828654] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3)
[ 1.828658] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr
[ 1.828661] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in)
[ 1.828665] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3)
[ 1.828773] mmc-bcm2835 fe300000.mmcnr: GPIO lookup for consumer wp
[ 1.828777] mmc-bcm2835 fe300000.mmcnr: using device tree for GPIO lookup
[ 1.828782] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmcnr@7e300000[0]'
[ 1.828792] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmcnr@7e300000[0]'
[ 1.828800] mmc-bcm2835 fe300000.mmcnr: using lookup tables for GPIO lookup
[ 1.828803] mmc-bcm2835 fe300000.mmcnr: No GPIO consumer wp found
[ 1.828824] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.834823] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.866287] sdhci-iproc fe340000.mmc: GPIO lookup for consumer cd
[ 1.866301] sdhci-iproc fe340000.mmc: using device tree for GPIO lookup
[ 1.866315] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/emmc2bus/mmc@7e340000[0]'
[ 1.866343] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/emmc2bus/mmc@7e340000[0]'
[ 1.866364] sdhci-iproc fe340000.mmc: using lookup tables for GPIO lookup
[ 1.866372] sdhci-iproc fe340000.mmc: No GPIO consumer cd found
[ 1.866381] sdhci-iproc fe340000.mmc: GPIO lookup for consumer wp
[ 1.866388] sdhci-iproc fe340000.mmc: using device tree for GPIO lookup
[ 1.866399] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/emmc2bus/mmc@7e340000[0]'
[ 1.866420] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/emmc2bus/mmc@7e340000[0]'
[ 1.866438] sdhci-iproc fe340000.mmc: using lookup tables for GPIO lookup
[ 1.866445] sdhci-iproc fe340000.mmc: No GPIO consumer wp found
[ 1.868405] of_cfs_init
[ 1.870953] of_cfs_init: OK
[ 1.903348] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.910651] Waiting for root device /dev/mmcblk0p2...
[ 1.950407] mmc0: new high speed SDHC card at address 0001
[ 1.950921] mmc1: new high speed SDIO card at address 0001
[ 1.956004] mmcblk mmc0:0001: no of_node; not parsing pinctrl DT
[ 1.961471] mmcblk mmc1:0001: no of_node; not parsing pinctrl DT
[ 1.961959] mmcblk0: mmc0:0001 SD 7.39 GiB
[ 1.967023] mmcblk0: p1 p2
[ 1.970004] mmcblk0: mmc0:0001 SD 7.39 GiB
[ 2.004870] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.015902] devtmpfs: mounted
[ 2.019215] Freeing unused kernel memory: 448K
[ 2.037837] Run /sbin/init as init process
[ 2.041929] with arguments:
[ 2.041931] /sbin/init
[ 2.041934] with environment:
[ 2.041936] HOME=/
[ 2.041938] TERM=linux
[ 2.200864] init: Console is alive
[ 2.204379] init: - watchdog -
[ 3.291353] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.339340] pps_core: LinuxPPS API ver. 1 registered
[ 3.344317] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.354891] PTP clock support registered
[ 3.362516] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.369485] ehci-fsl: Freescale EHCI Host controller driver
[ 3.375423] ehci-platform: EHCI generic platform driver
[ 3.382904] libata version 3.00 loaded.
[ 3.384232] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.396698] init: - preinit -
[ 3.784764] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 3.793252] bcmgenet fd580000.ethernet eth0: Link is Down
[ 3.822282] uart-pl011 fe201000.serial: no DMA platform data
[ 5.884504] mount_root: loading kmods from internal overlay
[ 5.914953] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 5.925234] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 6.089498] block: attempting to load /etc/config/fstab
[ 6.097436] block: unable to load configuration (fstab: Entry not found)
[ 6.104190] block: no usable configuration
[ 6.108659] loop0: detected capacity change from 0 to 1048576
[ 6.167796] loop0: detected capacity change from 1048576 to 941696
[ 6.174818] mount_root: overlay filesystem in /dev/loop0 has not been formatted yet
[ 6.549492] F2FS-fs (loop0): Found nat_bits in checkpoint
[ 6.562830] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce271
[ 6.604493] block: attempting to load /etc/config/fstab
[ 6.609833] block: unable to load configuration (fstab: Entry not found)
[ 6.616568] block: no usable configuration
[ 6.621142] mount_root: overlay filesystem has not been fully initialized yet
[ 6.628564] mount_root: switching to f2fs overlay
[ 6.641506] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 6.887941] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.896171] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.972556] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 7.019784] bcmgenet fd580000.ethernet eth0: Link is Down
[ 7.029009] procd: - early -
[ 7.031980] procd: - watchdog -
[ 7.570337] procd: - watchdog -
[ 7.573657] procd: - ubus -
[ 7.644791] procd: - init -
[ 8.189864] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.207041] MACsec IEEE 802.1AE
[ 8.211872] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 8.211872] originally by Donald Becker <becker@scyld.com>
[ 8.211872] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 8.230882] zram: Added device: zram0
[ 8.236028] NET: Registered PF_ATMPVC protocol family
[ 8.241150] NET: Registered PF_ATMSVC protocol family
[ 8.249740] NET: Registered PF_KEY protocol family
[ 8.255927] Initializing XFRM netlink socket
[ 8.262054] Modular ISDN core version 1.1.29
[ 8.266643] NET: Registered PF_ISDN protocol family
[ 8.272284] mISDN: Layer-1-over-IP driver Rev. 2.00
[ 8.277866] 0 virtual devices registered
[ 8.282895] DSP module 2.0
[ 8.285616] mISDN_dsp: DSP clocks every 80 samples. This equals 1 jiffies.
[ 8.295330] tun: Universal TUN/TAP device driver, 1.6
[ 8.302355] mISDN: HFC-multi driver 2.03
[ 8.318435] sctp: Hash tables configured (bind 256/256)
[ 8.324698] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 8.331841] nat46: module (version 95ca1c3b99376da2d0306919f2df4a8d3c9bb78b) loaded.
[ 8.341526] e1000: Intel(R) PRO/1000 Network Driver
[ 8.346419] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 8.353266] VMware vmxnet3 virtual NIC driver - version 1.6.0.0-k-NAPI
[ 8.360507] gre: GRE over IPv4 demultiplexor driver
[ 8.366068] ip_gre: GRE over IPv4 tunneling driver
[ 8.372503] ip6_gre: GRE over IPv6 tunneling driver
[ 8.403203] i2c_dev: i2c /dev entries driver
[ 8.411035] hid: raw HID events driver (C) Jiri Kosina
[ 8.417278] GACT probability on
[ 8.421139] Mirror/redirect action on
[ 8.428206] u32 classifier
[ 8.430929] input device check on
[ 8.434582] Actions configured
[ 8.442090] Simple TC action Loaded
[ 8.451621] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 8.460330] kmodloader: failed to find dependency nf_tproxy_ipv4
[ 8.466395] kmodloader: failed to find dependency nf_tproxy_ipv6
[ 8.482449] usbcore: registered new interface driver cdc_acm
[ 8.488146] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.496816] usbcore: registered new interface driver cdc_wdm
[ 8.502974] Loading modules backported from Linux version v6.1-rc8-0-g76dcd734eca2
[ 8.510592] Backport generated by backports.git v5.15.81-1-41-g02e352527db5
[ 8.520220] e100: Intel(R) PRO/100 Network Driver
[ 8.524944] e100: Copyright(c) 1999-2006 Intel Corporation
[ 8.532324] e1000e: Intel(R) PRO/1000 Network Driver
[ 8.537302] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 8.546696] hso: drivers/net/usb/hso.c: Option Wireless
[ 8.552028] usbcore: registered new interface driver hso
[ 8.559566] usbcore: registered new interface driver ipheth
[ 8.567494] usbcore: registered new interface driver kaweth
[ 8.573938] usbcore: registered new interface driver lan78xx
[ 8.628685] pegasus: Pegasus/Pegasus II USB Ethernet driver
[ 8.634333] usbcore: registered new interface driver pegasus
[ 8.642567] usbcore: registered new interface driver r8152
[ 8.650583] usbcore: registered new interface driver rtl8150
[ 8.657930] sis900.c: v1.08.10 Apr. 2 2006
[ 8.663512] sky2: driver version 1.30
[ 8.669346] Solos PCI Driver Version 1.04
[ 8.674961] tulip: tulip: unknown CPU architecture, using default csr0
[ 8.682878] usbcore: registered new interface driver usbhid
[ 8.688498] usbhid: USB HID core driver
[ 8.695419] usbcore: registered new interface driver usbserial_generic
[ 8.702016] usbserial: USB Serial support registered for generic
[ 8.710151] usbcore: registered new interface driver visor
[ 8.715682] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[ 8.723408] usbserial: USB Serial support registered for Sony Clie 5.0
[ 8.730014] usbserial: USB Serial support registered for Sony Clie 3.5
[ 8.995724] xt_ndpi v1.2 ndpi 4.7.0 IPv6=YES debug_message=no
[ 8.995724] BT: hash_size 0k, hash_expiation 0 sec, log_size 128kb
[ 8.995724] sizeof hash_ip4p_node=44 flow_struct=936 packet_struct=1424
[ 8.995724] flow_tcp_struct=112 flow_udp_struct=96 int_one_line_struct=16
[ 8.995724] ndpi_ip_addr_t=16 ndpi_protocol=6 nf_ct_ext_ndpi=176
[ 8.995724] flow_info=112 spinlock_t=4 NF_LABEL_ID 5
[ 9.032719] xt_ndpi: MAX_PROTOCOLS 512 LAST_PROTOCOL 333
[ 9.038043] xt_ndpi: flow acctounting OFF
[ 9.048002] xt_time: kernel timezone is -0000
[ 9.052983] usbcore: registered new interface driver ark3116
[ 9.058690] usbserial: USB Serial support registered for ark3116
[ 9.065579] usbcore: registered new interface driver asix
[ 9.071854] usbcore: registered new interface driver ax88179_178a
[ 9.078785] usbcore: registered new interface driver belkin_sa
[ 9.084667] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 9.094535] usbcore: registered new interface driver cdc_eem
[ 9.101121] usbcore: registered new interface driver cdc_ether
[ 9.108227] usbcore: registered new interface driver cdc_ncm
[ 9.114500] usbcore: registered new interface driver cdc_subset
[ 9.128434] usbcore: registered new interface driver ch341
[ 9.133989] usbserial: USB Serial support registered for ch341-uart
[ 9.146188] usbcore: registered new interface driver cp210x
[ 9.151866] usbserial: USB Serial support registered for cp210x
[ 9.158872] usbcore: registered new interface driver cypress_m8
[ 9.164880] usbserial: USB Serial support registered for DeLorme Earthmate USB
[ 9.172173] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[ 9.179551] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[ 9.187662] usbcore: registered new interface driver dm9601
[ 9.194936] usbcore: registered new interface driver ftdi_sio
[ 9.200836] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 9.209134] usbcore: registered new interface driver garmin_gps
[ 9.215131] usbserial: USB Serial support registered for Garmin GPS usb/tty
[ 9.223158] usbcore: registered new interface driver huawei_cdc_ncm
[ 9.231177] usbcore: registered new interface driver kalmia
[ 9.253168] usbcore: registered new interface driver keyspan
[ 9.258923] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 9.266790] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 9.274169] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 9.281593] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 9.300421] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 9.308639] usbcore: registered new interface driver mct_u232
[ 9.314435] usbserial: USB Serial support registered for MCT U232
[ 9.322237] usbcore: registered new interface driver mos7720
[ 9.327998] usbserial: USB Serial support registered for Moschip 2 port adapter
[ 9.336421] usbcore: registered new interface driver mt7601u
[ 9.344325] usbcore: registered new interface driver oti6858
[ 9.350080] usbserial: USB Serial support registered for oti6858
[ 9.356944] usbcore: registered new interface driver pl2303
[ 9.362635] usbserial: USB Serial support registered for pl2303
[ 9.370022] PPP generic driver version 2.4.2
[ 9.375199] NET: Registered PF_PPPOX protocol family
[ 9.381090] usbcore: registered new interface driver qmi_wwan
[ 9.387892] usbcore: registered new interface driver rndis_host
[ 9.486602] RTL871X: module init start
[ 9.490406] RTL871X: rtl8812au v4.3.14_13455.20150212_BTCOEX20150128-51
[ 9.497019] RTL871X: rtl8812au BT-Coex version = BTCOEX20150128-51
[ 9.503323] usbcore: registered new interface driver rtl8812au
[ 9.509172] RTL871X: module init ret=0
[ 9.514767] usbcore: registered new interface driver rtl8xxxu
[ 9.524702] usbcore: registered new interface driver sierra
[ 9.530384] usbserial: USB Serial support registered for Sierra USB modem
[ 9.538094] usbcore: registered new interface driver sierra_net
[ 9.544987] usbcore: registered new interface driver smsc95xx
[ 9.551561] usbcore: registered new interface driver sr9700
[ 9.557937] usbcore: registered new interface driver ti_usb_3410_5052
[ 9.564429] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ 9.572157] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[ 9.580475] usbcore: registered new interface driver usb_serial_simple
[ 9.587052] usbserial: USB Serial support registered for carelink
[ 9.593209] usbserial: USB Serial support registered for zio
[ 9.598935] usbserial: USB Serial support registered for funsoft
[ 9.604978] usbserial: USB Serial support registered for flashloader
[ 9.611404] usbserial: USB Serial support registered for google
[ 9.617366] usbserial: USB Serial support registered for libtransistor
[ 9.623962] usbserial: USB Serial support registered for vivopay
[ 9.630034] usbserial: USB Serial support registered for moto_modem
[ 9.636336] usbserial: USB Serial support registered for motorola_tetra
[ 9.643030] usbserial: USB Serial support registered for nokia
[ 9.648952] usbserial: USB Serial support registered for novatel_gps
[ 9.655353] usbserial: USB Serial support registered for hp4x
[ 9.661163] usbserial: USB Serial support registered for suunto
[ 9.667116] usbserial: USB Serial support registered for siemens_mpi
[ 9.676105] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 9.683998] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 9.703363] brcmfmac mmc1:0001:1: no of_node; not parsing pinctrl DT
[ 9.703473] brcmfmac mmc1:0001:2: no of_node; not parsing pinctrl DT
[ 9.706878] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 9.715651] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.bin failed with error -2
[ 9.727962] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.bin
[ 11.557430] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jul 29 2022 02:15:20 version 7.45.250 (70e9766 CY) FWID 01-e53e306b
[ 11.609252] brcmfmac mmc1:0001:3: no of_node; not parsing pinctrl DT
[ 11.609384] usbcore: registered new interface driver brcmfmac
[ 11.620544] usbcore: registered new interface driver cdc_mbim
[ 11.627050] usbcore: registered new interface driver ipw
[ 11.632441] usbserial: USB Serial support registered for IPWireless converter
[ 11.640496] usbcore: registered new interface driver option
[ 11.646129] usbserial: USB Serial support registered for GSM modem (1-port)
[ 11.654929] usbcore: registered new interface driver qcserial
[ 11.660730] usbserial: USB Serial support registered for Qualcomm USB modem
[ 11.671516] usbcore: registered new interface driver rt2800usb
[ 11.681516] usbcore: registered new interface driver rtl8192cu
[ 11.700779] usbcore: registered new interface driver ath9k_htc
[ 11.708938] kmodloader: 1 module could not be probed
[ 11.713955] kmodloader: missing dependency nf_tproxy_ipv4
[ 11.719425] kmodloader: missing dependency nf_tproxy_ipv6
[ 11.724851] kmodloader: - xt_TPROXY - 2
[ 22.631994] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 22.640782] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 22.643632] device eth0 entered promiscuous mode
[ 22.653853] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.823339] ieee80211 phy0: brcmf_cfg80211_add_iface: iface validation failed: err=-16
[ 22.836894] brcmfmac mmc1:0001:1 phy0-sta0: renamed from wlan0
[ 22.908131] ------------[ cut here ]------------
[ 22.912763] WARNING: CPU: 1 PID: 7629 at target-aarch64_cortex-a72_musl/linux-bcm27xx_bcm2711/rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/rtw_proc.c:1223 rtw_adapter_proc_replace+0x90/0xac [rtl8812au]
[ 22.930829] Modules linked in: ath9k ath9k_htc ath9k_common rtl8192cu rtl8192c_common rtl_usb rt2800usb rt2800lib qcserial pppoe ppp_async option ipw cdc_mbim brcmfmac ath9k_hw ath wireguard usb_wwan usb_serial_simple ti_usb_3410_5052 sr9700 smsc95xx sierra_net sierra rtlwifi rtl8xxxu rtl8812au rt2x00usb rt2x00lib rndis_host qmi_wwan pppox ppp_generic pl2303 oti6858 nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet mt7601u mos7720 mmc_spi mct_u232 mcs7830 mac80211 lzo libchacha20poly1305 keyspan kalmia ipt_REJECT huawei_cdc_ncm garmin_gps ftdi_sio dm9601 cypress_m8 cp210x chacha_neon ch341 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem belkin_sa ax88179_178a asix ark3116 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_quota xt_policy xt_pkttype xt_owner xt_ndpi xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_iface xt_hl xt_helper xt_hashlimit xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_condition xt_comment
[ 22.930988] xt_cgroup xt_addrtype xt_TRACE xt_TCPMSS xt_REDIRECT xt_MASQUERADE xt_LOG xt_IPMARK xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY xt_ACCOUNT visor via_velocity via_rhine usbserial usbnet usbhid tulip ts_fsm ts_bm solos_pci smsc slhc sky2 skge sis900 sis190 sch_cake rtl8150 rtc_pcf8563 r8169 r8152 r6040 poly1305_neon pegasus pcnet32 of_mmc_spi nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_compat nft_chain_nat nf_tables nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_pptp nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_flow_table nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_pptp nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conncount ne2k_pci macvlan lzo_rle lzo_decompress lzo_compress
[ 23.017895] libcurve25519_generic libchacha lan78xx kaweth iptable_raw iptable_nat iptable_mangle iptable_filter ipt_ah ipt_ECN ipheth ip6table_raw ip_tables hso hid_generic forcedeth ezusb ethoc et131x e1000e e100 crc7 crc_itu_t crc_ccitt compat_xtables compat cdc_wdm cdc_acm brcmutil bnx2 ax88796b atl2 atl1e atl1c atl1 asn1_decoder arptable_filter arpt_mangle arp_tables 8390 8250_pci 8139too 8139cp sch_teql sch_sfq sch_multiq sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte em_meta em_cmp act_simple act_pedit act_csum sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact configs hid evdev i2c_gpio i2c_algo_bit i2c_dev spi_ks8995 xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port
[ 23.105156] ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_NPT ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 swconfig bonding 3c59x ip6_gre ip_gre gre vmxnet3 e1000 ifb nat46 sit sctp udp_tunnel libcrc32c ip6_udp_tunnel ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel ipcomp esp4 ah4 ip6_tunnel netlink_diag tunnel6 tunnel4 ip_tunnel hfcpci hfcmulti veth tun mISDN_dsp l1oip mISDN_core xfrm_user xfrm_ipcomp af_key xfrm_algo autofs4 br2684 atm nls_utf8 zram zsmalloc natsemi macsec sha1_generic md5 kpp echainiv des_generic libdes deflate zlib_inflate zlib_deflate cmac authenc crypto_acompress vfat fat nls_iso8859_1 nls_cp437 ahci libahci libata fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug tg3 b44 ssb ptp realtek microchip pps_core
[ 23.266673] CPU: 1 PID: 7629 Comm: ip Not tainted 5.15.86 #0
[ 23.272328] Hardware name: Raspberry Pi Compute Module 4 Rev 1.1 (DT)
[ 23.278760] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 23.285716] pc : rtw_adapter_proc_replace+0x90/0xac [rtl8812au]
[ 23.291691] lr : rtw_cbuf_free+0x118/0x11c [rtl8812au]
[ 23.296859] sp : ffffffc010f63290
[ 23.300163] x29: ffffffc010f63290 x28: dead000000000122 x27: 0000000000000000
[ 23.307295] x26: ffffff8044d27000 x25: ffffffc008b68a98 x24: ffffff80455fe840
[ 23.314426] x23: ffffff804541c8c0 x22: ffffff8044d27000 x21: 0000000000000000
[ 23.321556] x20: ffffff8044d27000 x19: 000000000000000b x18: 0000000000000000
[ 23.328686] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 23.335816] x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000000
[ 23.342945] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000
[ 23.350075] x8 : 0000000000000000 x7 : 0000000000000005 x6 : 0000000000000158
[ 23.357205] x5 : 0000000000000000 x4 : ffffffc001585000 x3 : ffffffc0016738a4
[ 23.364335] x2 : ffffffc010f633c8 x1 : 000000000000000b x0 : ffffffc001745000
[ 23.371465] Call trace:
[ 23.373902] rtw_adapter_proc_replace+0x90/0xac [rtl8812au]
[ 23.379500] rtw_cbuf_free+0x118/0x11c [rtl8812au]
[ 23.384316] raw_notifier_call_chain+0x54/0x74
[ 23.388761] call_netdevice_notifiers_info+0x54/0xa0
[ 23.393720] dev_change_name+0x224/0x380
[ 23.397637] do_setlink+0xb48/0xdd0
[ 23.401121] __rtnl_newlink+0x470/0x7c0
[ 23.404950] rtnl_newlink+0x4c/0x80
[ 23.408431] rtnetlink_rcv_msg+0x1b8/0x320
[ 23.412520] netlink_rcv_skb+0x5c/0x130
[ 23.416349] rtnetlink_rcv+0x18/0x2c
[ 23.419918] netlink_unicast+0x1f8/0x2f4
[ 23.423832] netlink_sendmsg+0x1a0/0x3dc
[ 23.427747] ____sys_sendmsg+0x1b8/0x220
[ 23.431662] ___sys_sendmsg+0x84/0xf0
[ 23.435316] __sys_sendmsg+0x48/0xb0
[ 23.438882] __arm64_sys_sendmsg+0x24/0x30
[ 23.442970] invoke_syscall.constprop.0+0x5c/0x104
[ 23.447755] do_el0_svc+0x6c/0x15c
[ 23.451149] el0_svc+0x18/0x54
[ 23.454197] el0t_64_sync_handler+0xe8/0x114
[ 23.458460] el0t_64_sync+0x184/0x188
[ 23.462114] ---[ end trace 0459406441bce21c ]---
[ 24.721289] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-sta0: link becomes ready
[ 32.487770] cam-dummy-reg: disabling
Expected Behavior
Hi Ysurac, I get preconpiled img (https://snapshots.openmptcprouter.com/5.4/rpi4/targets/bcm27xx/bcm2711/openmptcprouter-v0.59.2alpha-5.4-r0+16819-1b6e9b3f64-bcm27xx-bcm2711-rpi-4-squashfs-factory.img.gz) into my cm4 with ext board, it seems work fine but I found that there is not any usb device found.
Current Behavior
Here post some log:
I ask for some solutions such as kmod-usbcore missing, after installed not working. Please help me find out what need to be done, thanks in advance.
Specifications