eth0 carry on other usb device,not the board at Recent version

[fareign]

if I have a usb networkcard on the router,eth0 allways gone to the usb networkcard not the board. I'm not sure it is relate to the linux kernel. or openwrt version

Specifications

• OpenMPTCProuter version: 0.60 6.1
• OpenMPTCProuter VPS version: 101029
• OpenMPTCProuter VPS provider:
• OpenMPTCProuter platform: /x86_64
• Country:

[Ysurac]

This is by detection order. You can make an interface to always keep same name by unchecking box "Disable interfaces auto rename" in System->OpenMTPCProuter, "Advanced settings" tab. This can sometimes help.

[fdyf520]

按照上面的设置之后并没有生效，依旧是原先的效果

[extozi]

I also have the same problem, it appeared on the following builds after openmptcprouter-v0.60beta1-6.1-r0+23789 I still couldn’t get eth0 to remain on the system rj45 after a reboot. If you unplug 2 USB cards before starting, the system port on the mini-pc board is assigned eth0. so far I have rolled back where there is no such problem

[github-actions[bot]]

This issue is stale because it has been open 90 days with no activity. Remove stale label or comment or this will be closed in 5 days