OMR By-pass error

[dnwk]

Failed to execute cbi dispatcher target for entry '/admin/services/omr-bypass/index'. The called action terminated with an exception: /usr/lib/lua/luci/model/cbi/omr-bypass.lua:90: bad argument #1 to 'lines' (/proc/net/xt_ndpi/proto: No such file or directory) stack traceback: [C]: in function 'lines' /usr/lib/lua/luci/model/cbi/omr-bypass.lua:90: in function 'func' /usr/lib/lua/luci/cbi.lua:66: in function 'load' /usr/lib/lua/luci/dispatcher.lua:838: in function </usr/lib/lua/luci/dispatcher.lua:832>

Specifications

• OpenMPTCProuter version: 0.45.16 r0+9007-529c95cc15
• OpenMPTCProuter VPS version: 0.88
• OpenMPTCProuter platform: Linksys WRT32X

[Ysurac]

Check openmptcprouter logs for ndpi.

[tukutt]

Same things here with RPI 2B.

Sat Jan 26 15:06:19 2019 user.notice omr6in4: Set network for OMR 6in4 to local 10.255.255.2 peer 10.255.255.1 Sat Jan 26 15:06:23 2019 user.notice post-tracking-post-tracking: Tunnel up : Replace default route by 10.255.255.1 dev tun0 Sat Jan 26 15:06:24 2019 daemon.err omr-6in4[4060]: Command failed: Not found Sat Jan 26 15:23:20 2019 daemon.err uhttpd[2003]: Failed to execute cbi dispatcher target for entry '/admin/services/omr-bypass/index'. Sat Jan 26 15:23:20 2019 daemon.err uhttpd[2003]: The called action terminated with an exception: Sat Jan 26 15:23:20 2019 daemon.err uhttpd[2003]: /usr/lib/lua/luci/model/cbi/omr-bypass.lua:90: bad argument #1 to 'lines' (/proc/net/xt_ndpi/proto: No such file or directory) Sat Jan 26 15:23:20 2019 daemon.err uhttpd[2003]: stack traceback: Sat Jan 26 15:23:20 2019 daemon.err uhttpd[2003]: [C]: in function 'lines' Sat Jan 26 15:23:20 2019 daemon.err uhttpd[2003]: /usr/lib/lua/luci/model/cbi/omr-bypass.lua:90: in function 'func' Sat Jan 26 15:23:20 2019 daemon.err uhttpd[2003]: /usr/lib/lua/luci/cbi.lua:66: in function 'load' Sat Jan 26 15:23:20 2019 daemon.err uhttpd[2003]: /usr/lib/lua/luci/dispatcher.lua:838: in function </usr/lib/lua/luci/dispatcher.lua:832`

[dnwk]

@tukutt could you check the logs as @Ysurac mentioned? I already revert back to old version.

[tukutt]

@dnwk Where I can found this information ? Thx

[Ysurac]

In Status->Kernel log and System log

[tukutt]

Kernel log : [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.14.91 (circleci@default-aaced3fb-866a-412f-91b6-70da4cff4abb) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r0+9007-529c95cc15)) #0 SMP Mon Jan 7 16:13:59 2019 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x3a400000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] free_area_init_node: node 0, pgdat 80927ac0, node_mem_map b9c88000 [ 0.000000] Normal zone: 1896 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:31 [ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x360 with crng_init=0 [ 0.000000] percpu: Embedded 16 pages/cpu @b9c36000 s33676 r8192 d23668 u65536 [ 0.000000] pcpu-alloc: s33676 r8192 d23668 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240792 [ 0.000000] Kernel command line: bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 936808K/970752K available (5120K kernel code, 160K rwdata, 1284K rodata, 1024K init, 365K bss, 17560K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB) [ 0.000000] lowmem : 0x80000000 - 0xbb400000 ( 948 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB) [ 0.000000] .init : 0x80800000 - 0x80900000 (1024 kB) [ 0.000000] .data : 0x80900000 - 0x809282c0 ( 161 kB) [ 0.000000] .bss : 0x8092d30c - 0x80988a68 ( 366 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000026] Switching to timer-based delay loop, resolution 52ns [ 0.000259] Console: colour dummy device 80x30 [ 0.000787] console [tty1] enabled [ 0.000837] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000881] pid_max: default: 32768 minimum: 301 [ 0.001055] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001091] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001790] CPU: Testing write buffer coherency: ok [ 0.002288] CPU0: update cpu_capacity 1024 [ 0.002320] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.002798] Setting up static identity map for 0x100000 - 0x100060 [ 0.002970] Hierarchical SRCU implementation. [ 0.003752] smp: Bringing up secondary CPUs ... [ 0.004639] CPU1: update cpu_capacity 1024 [ 0.004648] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.005588] CPU2: update cpu_capacity 1024 [ 0.005597] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.006469] CPU3: update cpu_capacity 1024 [ 0.006478] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.006589] smp: Brought up 1 node, 4 CPUs [ 0.006710] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006731] CPU: All CPU(s) started in HYP mode. [ 0.006749] CPU: Virtualization extensions available. [ 0.007970] devtmpfs: initialized [ 0.018635] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.018967] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.019016] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.020025] pinctrl core: initialized pinctrl subsystem [ 0.020455] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT [ 0.021213] NET: Registered protocol family 16 [ 0.023950] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.028359] cpuidle: using governor ladder [ 0.028424] cpuidle: using governor menu [ 0.028941] Serial: AMBA PL011 UART driver [ 0.030857] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.063180] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb815000, dmachans=0x1 [ 0.064528] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_5v0[0]' [ 0.064860] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_3v3[0]' [ 0.065504] SCSI subsystem initialized [ 0.065784] usbcore: registered new interface driver usbfs [ 0.065866] usbcore: registered new interface driver hub [ 0.065970] usbcore: registered new device driver usb [ 0.070145] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36 [ 0.071530] clocksource: Switched to clocksource arch_sys_counter [ 0.081921] NET: Registered protocol family 2 [ 0.082990] default registered [ 0.083021] default registered [ 0.083038] MPTCP: Stable release v0.94.1 [ 0.083069] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.083213] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.083416] TCP: Hash tables configured (established 8192 bind 8192) [ 0.083595] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.083672] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.083957] NET: Registered protocol family 1 [ 0.084879] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT [ 0.085456] Crashlog allocated RAM at address 0x3f00000 [ 0.085639] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.091322] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.093935] io scheduler noop registered [ 0.093971] io scheduler deadline registered [ 0.094161] io scheduler cfq registered (default) [ 0.094778] pinctrl-bcm2835 3f200000.gpio: get 00000000 (0 => gpio_in) [ 0.094790] pinctrl-bcm2835 3f200000.gpio: get 00000000 (1 => gpio_in) [ 0.094800] pinctrl-bcm2835 3f200000.gpio: get 00000000 (2 => gpio_in) [ 0.094810] pinctrl-bcm2835 3f200000.gpio: get 00000000 (3 => gpio_in) [ 0.094820] pinctrl-bcm2835 3f200000.gpio: get 00000000 (4 => gpio_in) [ 0.094829] pinctrl-bcm2835 3f200000.gpio: get 00000000 (5 => gpio_in) [ 0.094839] pinctrl-bcm2835 3f200000.gpio: get 00000000 (6 => gpio_in) [ 0.094849] pinctrl-bcm2835 3f200000.gpio: get 00000000 (7 => gpio_in) [ 0.094858] pinctrl-bcm2835 3f200000.gpio: get 00000000 (8 => gpio_in) [ 0.094868] pinctrl-bcm2835 3f200000.gpio: get 00000000 (9 => gpio_in) [ 0.094878] pinctrl-bcm2835 3f200000.gpio: get 00024000 (10 => gpio_in) [ 0.094888] pinctrl-bcm2835 3f200000.gpio: get 00024000 (11 => gpio_in) [ 0.094898] pinctrl-bcm2835 3f200000.gpio: get 00024000 (12 => gpio_in) [ 0.094908] pinctrl-bcm2835 3f200000.gpio: get 00024000 (13 => gpio_in) [ 0.094918] pinctrl-bcm2835 3f200000.gpio: get 00024000 (14 => alt0) [ 0.094928] pinctrl-bcm2835 3f200000.gpio: get 00024000 (15 => alt0) [ 0.094937] pinctrl-bcm2835 3f200000.gpio: get 00024000 (16 => gpio_in) [ 0.094947] pinctrl-bcm2835 3f200000.gpio: get 00024000 (17 => gpio_in) [ 0.094957] pinctrl-bcm2835 3f200000.gpio: get 00024000 (18 => gpio_in) [ 0.094967] pinctrl-bcm2835 3f200000.gpio: get 00024000 (19 => gpio_in) [ 0.094976] pinctrl-bcm2835 3f200000.gpio: get 00000000 (20 => gpio_in) [ 0.094986] pinctrl-bcm2835 3f200000.gpio: get 00000000 (21 => gpio_in) [ 0.094995] pinctrl-bcm2835 3f200000.gpio: get 00000000 (22 => gpio_in) [ 0.095005] pinctrl-bcm2835 3f200000.gpio: get 00000000 (23 => gpio_in) [ 0.095014] pinctrl-bcm2835 3f200000.gpio: get 00000000 (24 => gpio_in) [ 0.095024] pinctrl-bcm2835 3f200000.gpio: get 00000000 (25 => gpio_in) [ 0.095033] pinctrl-bcm2835 3f200000.gpio: get 00000000 (26 => gpio_in) [ 0.095043] pinctrl-bcm2835 3f200000.gpio: get 00000000 (27 => gpio_in) [ 0.095052] pinctrl-bcm2835 3f200000.gpio: get 00000000 (28 => gpio_in) [ 0.095062] pinctrl-bcm2835 3f200000.gpio: get 00000000 (29 => gpio_in) [ 0.095072] pinctrl-bcm2835 3f200000.gpio: get 01000048 (30 => gpio_in) [ 0.095082] pinctrl-bcm2835 3f200000.gpio: get 01000048 (31 => gpio_out) [ 0.095092] pinctrl-bcm2835 3f200000.gpio: get 01000048 (32 => gpio_out) [ 0.095101] pinctrl-bcm2835 3f200000.gpio: get 01000048 (33 => gpio_in) [ 0.095111] pinctrl-bcm2835 3f200000.gpio: get 01000048 (34 => gpio_in) [ 0.095121] pinctrl-bcm2835 3f200000.gpio: get 01000048 (35 => gpio_in) [ 0.095130] pinctrl-bcm2835 3f200000.gpio: get 01000048 (36 => gpio_in) [ 0.095140] pinctrl-bcm2835 3f200000.gpio: get 01000048 (37 => gpio_in) [ 0.095150] pinctrl-bcm2835 3f200000.gpio: get 01000048 (38 => gpio_out) [ 0.095159] pinctrl-bcm2835 3f200000.gpio: get 01000048 (39 => gpio_in) [ 0.095169] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (40 => alt0) [ 0.095179] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (41 => gpio_out) [ 0.095189] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (42 => gpio_out) [ 0.095198] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (43 => gpio_in) [ 0.095208] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (44 => alt0) [ 0.095218] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (45 => alt0) [ 0.095227] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (46 => gpio_in) [ 0.095237] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (47 => gpio_out) [ 0.095247] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (48 => alt3) [ 0.095257] pinctrl-bcm2835 3f200000.gpio: get 3f22404c (49 => alt3) [ 0.095266] pinctrl-bcm2835 3f200000.gpio: get 00000fff (50 => alt3) [ 0.095276] pinctrl-bcm2835 3f200000.gpio: get 00000fff (51 => alt3) [ 0.095286] pinctrl-bcm2835 3f200000.gpio: get 00000fff (52 => alt3) [ 0.095295] pinctrl-bcm2835 3f200000.gpio: get 00000fff (53 => alt3) [ 0.095622] gpio gpiochip0: (pinctrl-bcm2835): added GPIO chardev (254:0) [ 0.095728] gpiochip_setup_dev: registered GPIOs 0 to 53 on device: gpiochip0 (pinctrl-bcm2835) [ 0.095864] pinctrl-bcm2835 3f200000.gpio: try to register 54 pins ... [ 0.095875] pinctrl core: registered pin 0 (gpio0) on pinctrl-bcm2835 [ 0.095884] pinctrl core: registered pin 1 (gpio1) on pinctrl-bcm2835 [ 0.095891] pinctrl core: registered pin 2 (gpio2) on pinctrl-bcm2835 [ 0.095897] pinctrl core: registered pin 3 (gpio3) on pinctrl-bcm2835 [ 0.095916] pinctrl core: registered pin 4 (gpio4) on pinctrl-bcm2835 [ 0.095922] pinctrl core: registered pin 5 (gpio5) on pinctrl-bcm2835 [ 0.095929] pinctrl core: registered pin 6 (gpio6) on pinctrl-bcm2835 [ 0.095935] pinctrl core: registered pin 7 (gpio7) on pinctrl-bcm2835 [ 0.095941] pinctrl core: registered pin 8 (gpio8) on pinctrl-bcm2835 [ 0.095948] pinctrl core: registered pin 9 (gpio9) on pinctrl-bcm2835 [ 0.095955] pinctrl core: registered pin 10 (gpio10) on pinctrl-bcm2835 [ 0.095961] pinctrl core: registered pin 11 (gpio11) on pinctrl-bcm2835 [ 0.095968] pinctrl core: registered pin 12 (gpio12) on pinctrl-bcm2835 [ 0.095974] pinctrl core: registered pin 13 (gpio13) on pinctrl-bcm2835 [ 0.095981] pinctrl core: registered pin 14 (gpio14) on pinctrl-bcm2835 [ 0.095988] pinctrl core: registered pin 15 (gpio15) on pinctrl-bcm2835 [ 0.095994] pinctrl core: registered pin 16 (gpio16) on pinctrl-bcm2835 [ 0.096001] pinctrl core: registered pin 17 (gpio17) on pinctrl-bcm2835 [ 0.096008] pinctrl core: registered pin 18 (gpio18) on pinctrl-bcm2835 [ 0.096014] pinctrl core: registered pin 19 (gpio19) on pinctrl-bcm2835 [ 0.096021] pinctrl core: registered pin 20 (gpio20) on pinctrl-bcm2835 [ 0.096027] pinctrl core: registered pin 21 (gpio21) on pinctrl-bcm2835 [ 0.096034] pinctrl core: registered pin 22 (gpio22) on pinctrl-bcm2835 [ 0.096040] pinctrl core: registered pin 23 (gpio23) on pinctrl-bcm2835 [ 0.096047] pinctrl core: registered pin 24 (gpio24) on pinctrl-bcm2835 [ 0.096054] pinctrl core: registered pin 25 (gpio25) on pinctrl-bcm2835 [ 0.096061] pinctrl core: registered pin 26 (gpio26) on pinctrl-bcm2835 [ 0.096067] pinctrl core: registered pin 27 (gpio27) on pinctrl-bcm2835 [ 0.096074] pinctrl core: registered pin 28 (gpio28) on pinctrl-bcm2835 [ 0.096080] pinctrl core: registered pin 29 (gpio29) on pinctrl-bcm2835 [ 0.096087] pinctrl core: registered pin 30 (gpio30) on pinctrl-bcm2835 [ 0.096094] pinctrl core: registered pin 31 (gpio31) on pinctrl-bcm2835 [ 0.096100] pinctrl core: registered pin 32 (gpio32) on pinctrl-bcm2835 [ 0.096107] pinctrl core: registered pin 33 (gpio33) on pinctrl-bcm2835 [ 0.096114] pinctrl core: registered pin 34 (gpio34) on pinctrl-bcm2835 [ 0.096120] pinctrl core: registered pin 35 (gpio35) on pinctrl-bcm2835 [ 0.096127] pinctrl core: registered pin 36 (gpio36) on pinctrl-bcm2835 [ 0.096133] pinctrl core: registered pin 37 (gpio37) on pinctrl-bcm2835 [ 0.096140] pinctrl core: registered pin 38 (gpio38) on pinctrl-bcm2835 [ 0.096146] pinctrl core: registered pin 39 (gpio39) on pinctrl-bcm2835 [ 0.096153] pinctrl core: registered pin 40 (gpio40) on pinctrl-bcm2835 [ 0.096160] pinctrl core: registered pin 41 (gpio41) on pinctrl-bcm2835 [ 0.096166] pinctrl core: registered pin 42 (gpio42) on pinctrl-bcm2835 [ 0.096173] pinctrl core: registered pin 43 (gpio43) on pinctrl-bcm2835 [ 0.096179] pinctrl core: registered pin 44 (gpio44) on pinctrl-bcm2835 [ 0.096186] pinctrl core: registered pin 45 (gpio45) on pinctrl-bcm2835 [ 0.096192] pinctrl core: registered pin 46 (gpio46) on pinctrl-bcm2835 [ 0.096199] pinctrl core: registered pin 47 (gpio47) on pinctrl-bcm2835 [ 0.096206] pinctrl core: registered pin 48 (gpio48) on pinctrl-bcm2835 [ 0.096212] pinctrl core: registered pin 49 (gpio49) on pinctrl-bcm2835 [ 0.096219] pinctrl core: registered pin 50 (gpio50) on pinctrl-bcm2835 [ 0.096225] pinctrl core: registered pin 51 (gpio51) on pinctrl-bcm2835 [ 0.096232] pinctrl core: registered pin 52 (gpio52) on pinctrl-bcm2835 [ 0.096239] pinctrl core: registered pin 53 (gpio53) on pinctrl-bcm2835 [ 0.096253] pinctrl-bcm2835 3f200000.gpio: no hogs found [ 0.097367] BCM2708FB: allocated DMA memory fa500000 [ 0.097436] BCM2708FB: allocated DMA channel 0 @ bb815000 [ 0.106863] Console: switching to colour frame buffer device 82x26 [ 0.115607] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.121774] serial8250 serial8250: no of_node; not parsing pinctrl DT [ 0.122514] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.128217] vc-sm: Videocore shared memory driver [ 0.142088] brd: module loaded [ 0.150383] loop: module loaded [ 0.153466] mdio_bus fixed-0: GPIO lookup for consumer reset [ 0.153476] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 0.153486] mdio_bus fixed-0: lookup for GPIO reset failed [ 0.153522] libphy: Fixed MDIO Bus: probed [ 0.156232] usbcore: registered new interface driver lan78xx [ 0.158919] usbcore: registered new interface driver smsc95xx [ 0.161452] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.191912] dwc_otg 3f980000.usb: base=0xf0980000 [ 0.394595] Core Release: 2.80a [ 0.397015] Setting default values for core params [ 0.399443] Finished setting default values for core params [ 0.602123] Using Buffer DMA mode [ 0.604459] Periodic Transfer Interrupt Enhancement - disabled [ 0.606929] Multiprocessor Interrupt Enhancement - disabled [ 0.609454] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.611984] Dedicated Tx FIFOs mode [ 0.614914] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xba514000 dma = 0xfa514000 len=9024 [ 0.620113] FIQ FSM acceleration enabled for : [ 0.620113] Non-periodic Split Transactions [ 0.620113] Periodic Split Transactions [ 0.620113] High-Speed Isochronous Endpoints [ 0.620113] Interrupt/Control Split Transaction hack enabled [ 0.632223] dwc_otg: Microframe scheduler enabled [ 0.632295] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8043e014 [ 0.634830] WARN::hcd_init_fiq:460: FIQ ASM at 0x8043e330 length 36 [ 0.637324] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000 [ 0.639917] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.642504] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.645139] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.647729] Init: Port Power? op_state=1 [ 0.650254] Init: Power Port (0) [ 0.652990] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.655585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.658166] usb usb1: Product: DWC OTG Controller [ 0.660688] usb usb1: Manufacturer: Linux 4.14.91 dwc_otg_hcd [ 0.663250] usb usb1: SerialNumber: 3f980000.usb [ 0.666488] hub 1-0:1.0: no of_node; not parsing pinctrl DT [ 0.666529] hub 1-0:1.0: USB hub found [ 0.669017] hub 1-0:1.0: 1 port detected [ 0.671936] dwc_otg: FIQ enabled [ 0.671942] dwc_otg: NAK holdoff enabled [ 0.671947] dwc_otg: FIQ split-transaction FSM enabled [ 0.671959] Module dwc_common_port init [ 0.672236] usbcore: registered new interface driver uas [ 0.674685] usbcore: registered new interface driver usb-storage [ 0.677214] mousedev: PS/2 mouse device common for all mice [ 0.680283] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.683082] bcm2835-cpufreq: min=600000 max=900000 [ 0.685968] sdhci: Secure Digital Host Controller Interface driver [ 0.688451] sdhci: Copyright(c) Pierre Ossman [ 0.691073] pinctrl core: add 6 pinctrl maps [ 0.691114] pinctrl-bcm2835 3f200000.gpio: found group selector 48 for gpio48 [ 0.691136] pinctrl-bcm2835 3f200000.gpio: found group selector 49 for gpio49 [ 0.691156] pinctrl-bcm2835 3f200000.gpio: found group selector 50 for gpio50 [ 0.691176] pinctrl-bcm2835 3f200000.gpio: found group selector 51 for gpio51 [ 0.691196] pinctrl-bcm2835 3f200000.gpio: found group selector 52 for gpio52 [ 0.691217] pinctrl-bcm2835 3f200000.gpio: found group selector 53 for gpio53 [ 0.691232] pinctrl-bcm2835 3f200000.gpio: request pin 48 (gpio48) for 3f202000.mmc [ 0.691246] pinctrl-bcm2835 3f200000.gpio: read 3f22404c (48 => alt3) [ 0.691256] pinctrl-bcm2835 3f200000.gpio: trans 3822404c (48 <= gpio_in) [ 0.691265] pinctrl-bcm2835 3f200000.gpio: write 3c22404c (48 <= alt0) [ 0.691276] pinctrl-bcm2835 3f200000.gpio: request pin 49 (gpio49) for 3f202000.mmc [ 0.691288] pinctrl-bcm2835 3f200000.gpio: read 3c22404c (49 => alt3) [ 0.691297] pinctrl-bcm2835 3f200000.gpio: trans 0422404c (49 <= gpio_in) [ 0.691306] pinctrl-bcm2835 3f200000.gpio: write 2422404c (49 <= alt0) [ 0.691316] pinctrl-bcm2835 3f200000.gpio: request pin 50 (gpio50) for 3f202000.mmc [ 0.691326] pinctrl-bcm2835 3f200000.gpio: read 00000fff (50 => alt3) [ 0.691336] pinctrl-bcm2835 3f200000.gpio: trans 00000ff8 (50 <= gpio_in) [ 0.691345] pinctrl-bcm2835 3f200000.gpio: write 00000ffc (50 <= alt0) [ 0.691355] pinctrl-bcm2835 3f200000.gpio: request pin 51 (gpio51) for 3f202000.mmc [ 0.691365] pinctrl-bcm2835 3f200000.gpio: read 00000ffc (51 => alt3) [ 0.691374] pinctrl-bcm2835 3f200000.gpio: trans 00000fc4 (51 <= gpio_in) [ 0.691383] pinctrl-bcm2835 3f200000.gpio: write 00000fe4 (51 <= alt0) [ 0.691393] pinctrl-bcm2835 3f200000.gpio: request pin 52 (gpio52) for 3f202000.mmc [ 0.691403] pinctrl-bcm2835 3f200000.gpio: read 00000fe4 (52 => alt3) [ 0.691413] pinctrl-bcm2835 3f200000.gpio: trans 00000e24 (52 <= gpio_in) [ 0.691422] pinctrl-bcm2835 3f200000.gpio: write 00000f24 (52 <= alt0) [ 0.691432] pinctrl-bcm2835 3f200000.gpio: request pin 53 (gpio53) for 3f202000.mmc [ 0.691442] pinctrl-bcm2835 3f200000.gpio: read 00000f24 (53 => alt3) [ 0.691451] pinctrl-bcm2835 3f200000.gpio: trans 00000124 (53 <= gpio_in) [ 0.691460] pinctrl-bcm2835 3f200000.gpio: write 00000924 (53 <= alt0) [ 0.691667] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.694306] pinctrl-bcm2835 3f200000.gpio: read 2422404c (48 => alt0) [ 0.694317] pinctrl-bcm2835 3f200000.gpio: write 2022404c (48 <= gpio_in) [ 0.694330] pinctrl-bcm2835 3f200000.gpio: read 2022404c (49 => alt0) [ 0.694339] pinctrl-bcm2835 3f200000.gpio: write 0022404c (49 <= gpio_in) [ 0.694350] pinctrl-bcm2835 3f200000.gpio: read 00000924 (50 => alt0) [ 0.694359] pinctrl-bcm2835 3f200000.gpio: write 00000920 (50 <= gpio_in) [ 0.694369] pinctrl-bcm2835 3f200000.gpio: read 00000920 (51 => alt0) [ 0.694379] pinctrl-bcm2835 3f200000.gpio: write 00000900 (51 <= gpio_in) [ 0.694389] pinctrl-bcm2835 3f200000.gpio: read 00000900 (52 => alt0) [ 0.694398] pinctrl-bcm2835 3f200000.gpio: write 00000800 (52 <= gpio_in) [ 0.694409] pinctrl-bcm2835 3f200000.gpio: read 00000800 (53 => alt0) [ 0.694418] pinctrl-bcm2835 3f200000.gpio: write 00000000 (53 <= gpio_in) [ 0.694522] Error: Driver 'sdhost-bcm2835' is already registered, aborting... [ 0.697160] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.699933] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/act[0]' - status (0) [ 0.699955] pinctrl-bcm2835 3f200000.gpio: request pin 47 (gpio47) for pinctrl-bcm2835:47 [ 0.699969] pinctrl-bcm2835 3f200000.gpio: get 0022404c (47 => gpio_out) [ 0.699976] no flags found for gpios [ 0.700002] pinctrl-bcm2835 3f200000.gpio: read 0022404c (47 => gpio_out) [ 0.700132] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/pwr[0]' - status (0) [ 0.700150] pinctrl-bcm2835 3f200000.gpio: request pin 35 (gpio35) for pinctrl-bcm2835:35 [ 0.700162] pinctrl-bcm2835 3f200000.gpio: get 01000048 (35 => gpio_in) [ 0.700167] no flags found for gpios [ 0.700183] pinctrl-bcm2835 3f200000.gpio: read 01000048 (35 => gpio_in) [ 0.700193] pinctrl-bcm2835 3f200000.gpio: write 01008048 (35 <= gpio_out) [ 0.700363] pinctrl-bcm2835 3f200000.gpio: read 01008048 (35 => gpio_out) [ 0.700373] pinctrl-bcm2835 3f200000.gpio: write 01000048 (35 <= gpio_in) [ 0.701289] vchiq: vchiq_init_state: slot_zero = ba580000, is_master = 0

[ 0.714329] [vc_sm_connected_init]: end - returning 0 [ 0.718250] NET: Registered protocol family 10 [ 0.722187] Segment Routing with IPv6 [ 0.724911] fullmesh registered [ 0.727405] ndiffports registered [ 0.729865] binder registered [ 0.732313] roundrobin registered [ 0.733999] redundant registered [ 0.735604] NET: Registered protocol family 17 [ 0.737263] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.740861] 8021q: 802.1Q VLAN Support v1.8 [ 0.742862] Registering SWP/SWPB emulation handler [ 0.749377] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.751226] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 0.891621] Indeed it is in host mode hprt0 = 00021501 [ 0.892693] console [ttyAMA0] enabled [ 1.037806] random: fast init done [ 1.042332] pinctrl core: add 6 pinctrl maps [ 1.151537] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.154811] pinctrl-bcm2835 3f200000.gpio: found group selector 48 for gpio48 [ 1.158990] Indeed it is in host mode hprt0 = 00001101 [ 1.162792] pinctrl-bcm2835 3f200000.gpio: found group selector 49 for gpio49 [ 1.401764] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 1.409130] pinctrl-bcm2835 3f200000.gpio: found group selector 50 for gpio50 [ 1.431459] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.437379] pinctrl-bcm2835 3f200000.gpio: found group selector 51 for gpio51 [ 1.444194] hub 1-1:1.0: no of_node; not parsing pinctrl DT [ 1.449644] pinctrl-bcm2835 3f200000.gpio: found group selector 52 for gpio52 [ 1.689009] pinctrl-bcm2835 3f200000.gpio: found group selector 53 for gpio53 [ 1.689023] pinctrl-bcm2835 3f200000.gpio: request pin 48 (gpio48) for 3f202000.mmc [ 1.689034] pinctrl-bcm2835 3f200000.gpio: read 0022404c (48 => gpio_in) [ 1.689041] pinctrl-bcm2835 3f200000.gpio: write 0422404c (48 <= alt0) [ 1.689044] hub 1-1:1.0: USB hub found [ 1.689128] hub 1-1:1.0: 5 ports detected [ 1.694532] pinctrl-bcm2835 3f200000.gpio: request pin 49 (gpio49) for 3f202000.mmc [ 1.700171] pinctrl-bcm2835 3f200000.gpio: read 0422404c (49 => gpio_in) [ 1.700178] pinctrl-bcm2835 3f200000.gpio: write 2422404c (49 <= alt0) [ 1.700185] pinctrl-bcm2835 3f200000.gpio: request pin 50 (gpio50) for 3f202000.mmc [ 1.700192] pinctrl-bcm2835 3f200000.gpio: read 00000000 (50 => gpio_in) [ 1.700199] pinctrl-bcm2835 3f200000.gpio: write 00000004 (50 <= alt0) [ 1.700205] pinctrl-bcm2835 3f200000.gpio: request pin 51 (gpio51) for 3f202000.mmc [ 1.700212] pinctrl-bcm2835 3f200000.gpio: read 00000004 (51 => gpio_in) [ 1.700219] pinctrl-bcm2835 3f200000.gpio: write 00000024 (51 <= alt0) [ 1.700225] pinctrl-bcm2835 3f200000.gpio: request pin 52 (gpio52) for 3f202000.mmc [ 1.700232] pinctrl-bcm2835 3f200000.gpio: read 00000024 (52 => gpio_in) [ 1.700238] pinctrl-bcm2835 3f200000.gpio: write 00000124 (52 <= alt0) [ 1.700245] pinctrl-bcm2835 3f200000.gpio: request pin 53 (gpio53) for 3f202000.mmc [ 1.700252] pinctrl-bcm2835 3f200000.gpio: read 00000124 (53 => gpio_in) [ 1.700258] pinctrl-bcm2835 3f200000.gpio: write 00000924 (53 <= alt0) [ 1.700768] sdhost: log_buf @ ba513000 (fa513000) [ 1.707129] sdhost-bcm2835 3f202000.mmc: GPIO lookup for consumer cd [ 1.707135] sdhost-bcm2835 3f202000.mmc: using device tree for GPIO lookup [ 1.707147] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/mmc@7e202000[0]' [ 1.707155] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/mmc@7e202000[0]' [ 1.707160] sdhost-bcm2835 3f202000.mmc: using lookup tables for GPIO lookup [ 1.707167] sdhost-bcm2835 3f202000.mmc: lookup for GPIO cd failed [ 1.707176] sdhost-bcm2835 3f202000.mmc: GPIO lookup for consumer wp [ 1.707181] sdhost-bcm2835 3f202000.mmc: using device tree for GPIO lookup [ 1.707188] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@7e202000[0]' [ 1.707195] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@7e202000[0]' [ 1.707200] sdhost-bcm2835 3f202000.mmc: using lookup tables for GPIO lookup [ 1.707206] sdhost-bcm2835 3f202000.mmc: lookup for GPIO wp failed [ 1.781562] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.790462] of_cfs_init [ 1.795449] of_cfs_init: OK [ 1.802174] Waiting for root device /dev/mmcblk0p2... [ 1.929917] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.946481] mmc0: new high speed SDHC card at address aaaa [ 1.953967] mmcblk mmc0:aaaa: no of_node; not parsing pinctrl DT [ 1.954206] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 1.961829] mmcblk0: p1 p2 [ 1.991962] VFS: Mounted root (squashfs filesystem) readonly on device 179:2. [ 2.006472] devtmpfs: mounted [ 2.012548] Freeing unused kernel memory: 1024K [ 2.018925] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.151902] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.160720] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.172626] smsc95xx 1-1.1:1.0: no of_node; not parsing pinctrl DT [ 2.172695] smsc95xx v1.0.6 [ 2.304630] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f1:6a:4e [ 2.336344] init: Console is alive [ 2.341901] init: - watchdog - [ 3.563982] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 3.616193] pps_core: LinuxPPS API ver. 1 registered [ 3.623179] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 3.638763] PTP clock support registered [ 3.647056] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.656497] ehci-platform: EHCI generic platform driver [ 3.667656] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 3.681614] init: - preinit - [ 4.223561] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 4.234554] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.254379] pinctrl-bcm2835 3f200000.gpio: read 01000048 (35 => gpio_in) [ 4.254391] pinctrl-bcm2835 3f200000.gpio: write 01008048 (35 <= gpio_out) [ 4.257865] random: procd: uninitialized urandom read (4 bytes read) [ 5.803632] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 5.816603] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.855889] F2FS-fs (loop0): Mounted with checkpoint version = 8f5df3b [ 7.867089] mount_root: switching to f2fs overlay [ 7.940227] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.961740] urandom-seed: Seeding with /etc/urandom.seed [ 8.074723] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 8.088346] procd: - early - [ 8.093608] procd: - watchdog - [ 8.629258] random: jshn: uninitialized urandom read (4 bytes read) [ 8.763101] random: jshn: uninitialized urandom read (4 bytes read) [ 8.796065] procd: - watchdog - [ 8.801722] procd: - ubus - [ 8.859403] random: jshn: uninitialized urandom read (4 bytes read) [ 8.957458] procd: - init - [ 8.993344] uart-pl011 3f201000.serial: no DMA platform data [ 9.555425] kmodloader: loading kernel modules from /etc/modules.d/* [ 9.611301] Modular ISDN core version 1.1.29 [ 9.618119] NET: Registered protocol family 34 [ 9.626372] DSP module 2.0 [ 9.631028] mISDN_dsp: DSP clocks every 80 samples. This equals 1 jiffies. [ 9.648332] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 9.657858] 0 virtual devices registered [ 9.679848] tun: Universal TUN/TAP device driver, 1.6 [ 9.695656] sctp: Hash tables configured (bind 512/512) [ 9.704858] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 9.730909] ISDN subsystem Rev: 1.1.2.3/ [ 9.730922] 1.1.2.2/ [ 9.736854] 1.1.2.3/ [ 9.740840] 1.1.2.2/ [ 9.744729] 1.1.2.2 [ 9.748509] loaded [ 9.757075] PPP BSD Compression module registered [ 9.764691] dss1_divert module successfully installed [ 9.774561] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.790467] nf_conntrack version 0.5.0 (15360 buckets, 61440 max) [ 9.831071] Netfilter messages via NETLINK v0.30. [ 9.839487] ip_set: protocol 6 [ 9.863247] i2c /dev entries driver [ 9.875744] hidraw: raw HID events driver (C) Jiri Kosina [ 9.885185] pinctrl core: add 2 pinctrl maps [ 9.885236] pinctrl-bcm2835 3f200000.gpio: found group selector 40 for gpio40 [ 9.885254] pinctrl-bcm2835 3f200000.gpio: found group selector 45 for gpio45 [ 9.885275] pinctrl-bcm2835 3f200000.gpio: request pin 40 (gpio40) for soc:audio [ 9.885292] pinctrl-bcm2835 3f200000.gpio: read 2422404c (40 => alt0) [ 9.885302] pinctrl-bcm2835 3f200000.gpio: request pin 45 (gpio45) for soc:audio [ 9.885309] pinctrl-bcm2835 3f200000.gpio: read 2422404c (45 => alt0) [ 9.888463] bcm2835_alsa bcm2835_alsa: card created with 8 channels [ 9.903430] u32 classifier [ 9.907597] input device check on [ 9.912740] Actions configured [ 9.919343] Mirror/redirect action on [ 9.933223] arp_tables: arp_tables: (C) 2002 David S. Miller [ 9.942923] usbcore: registered new interface driver asix [ 9.950588] usbcore: registered new interface driver ax88179_178a [ 9.960381] usbcore: registered new interface driver cdc_acm [ 9.967533] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 9.979771] usbcore: registered new interface driver cdc_eem [ 9.988358] usbcore: registered new interface driver cdc_ether [ 9.997370] usbcore: registered new interface driver cdc_ncm [ 10.005507] usbcore: registered new interface driver cdc_subset [ 10.014254] usbcore: registered new interface driver cdc_wdm [ 10.023098] Loading modules backported from Linux version v4.19.7-0-g61c68f2a2af0 [ 10.033612] Backport generated by backports.git v4.19.7-1-0-g148b072d [ 10.044876] usbcore: registered new interface driver dm9601 [ 10.058056] Ebtables v2.0 registered [ 10.067973] gigaset: Driver for Gigaset 307x [ 10.073903] gigaset: ISDN4Linux interface [ 10.081731] hso: drivers/net/usb/hso.c: Option Wireless [ 10.088779] usbcore: registered new interface driver hso [ 10.096831] usbcore: registered new interface driver huawei_cdc_ncm [ 10.106816] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.115793] usbcore: registered new interface driver ipheth [ 10.127776] usbcore: registered new interface driver kalmia [ 10.136025] usbcore: registered new interface driver kaweth [ 10.145484] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 10.189949] ctnetlink v0.93: registering with nfnetlink. [ 10.248104] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 10.259046] usbcore: registered new interface driver pegasus [ 10.269051] PPP generic driver version 2.4.2 [ 10.276757] NET: Registered protocol family 24 [ 10.284334] usbcore: registered new interface driver qmi_wwan [ 10.293352] usbcore: registered new interface driver r8152 [ 10.303851] usbcore: registered new interface driver r8712u [ 10.312975] usbcore: registered new interface driver rndis_host [ 10.321418] usbcore: registered new interface driver rtl8150 [ 10.331034] usbcore: registered new interface driver sierra_net [ 10.339710] usbcore: registered new interface driver sr9700 [ 10.349884] usbcore: registered new interface driver usb_gigaset [ 10.357403] usb_gigaset: USB Driver for Gigaset 307x using M105 [ 10.367006] usbcore: registered new interface driver usbhid [ 10.374056] usbhid: USB HID core driver [ 10.383264] usbcore: registered new interface driver usbserial [ 10.390965] usbcore: registered new interface driver usbserial_generic [ 10.399218] usbserial: USB Serial support registered for generic [ 10.407803] usbcore: registered new interface driver visor [ 10.414869] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 10.425501] usbserial: USB Serial support registered for Sony Clie 5.0 [ 10.433707] usbserial: USB Serial support registered for Sony Clie 3.5 [ 10.474660] xt_ndpi: Unknown symbol aeabi_uldivmod (err 0) [ 10.550957] xt_time: kernel timezone is -0000 [ 10.557900] usbcore: registered new interface driver ark3116 [ 10.565163] usbserial: USB Serial support registered for ark3116 [ 10.575160] usbcore: registered new interface driver bas_gigaset [ 10.583040] bas_gigaset: USB Driver for Gigaset 307x [ 10.590989] usbcore: registered new interface driver belkin_sa [ 10.598835] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 10.613333] usbcore: registered new interface driver cdc_mbim [ 10.644318] usbcore: registered new interface driver ch341 [ 10.651928] usbserial: USB Serial support registered for ch341-uart [ 10.661364] usbcore: registered new interface driver cp210x [ 10.668974] usbserial: USB Serial support registered for cp210x [ 10.678269] usbcore: registered new interface driver cypress_m8 [ 10.686359] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 10.695761] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 10.705138] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 10.718341] usbcore: registered new interface driver ftdi_sio [ 10.726146] usbserial: USB Serial support registered for FTDI USB Serial Device [ 10.736994] usbcore: registered new interface driver garmin_gps [ 10.744984] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 10.758648] usbcore: registered new interface driver keyspan [ 10.766376] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 10.778283] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 10.787854] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 10.797333] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 10.829256] usbcore: registered new interface driver mct_u232 [ 10.837124] usbserial: USB Serial support registered for MCT U232 [ 10.847589] usbcore: registered new interface driver mos7720 [ 10.855591] usbserial: USB Serial support registered for Moschip 2 port adapter [ 10.867016] usbcore: registered new interface driver mt7601u [ 10.880834] usbcore: registered new interface driver oti6858 [ 10.888760] usbserial: USB Serial support registered for oti6858 [ 10.898314] usbcore: registered new interface driver pl2303 [ 10.905994] usbserial: USB Serial support registered for pl2303 [ 10.929228] usbcore: registered new interface driver rtl8xxxu [ 10.948141] usbcore: registered new interface driver sierra [ 10.956033] usbserial: USB Serial support registered for Sierra USB modem [ 10.966199] usbcore: registered new interface driver ti_usb_3410_5052 [ 10.974658] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 10.986475] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 10.999298] usbcore: registered new interface driver usb_serial_simple [ 11.007897] usbserial: USB Serial support registered for carelink [ 11.016070] usbserial: USB Serial support registered for zio [ 11.023819] usbserial: USB Serial support registered for funsoft [ 11.032097] usbserial: USB Serial support registered for flashloader [ 11.040559] usbserial: USB Serial support registered for google [ 11.048446] usbserial: USB Serial support registered for libtransistor [ 11.056823] usbserial: USB Serial support registered for vivopay [ 11.064528] usbserial: USB Serial support registered for moto_modem [ 11.072551] usbserial: USB Serial support registered for motorola_tetra [ 11.081099] usbserial: USB Serial support registered for novatel_gps [ 11.089297] usbserial: USB Serial support registered for hp4x [ 11.096697] usbserial: USB Serial support registered for suunto [ 11.104182] usbserial: USB Serial support registered for siemens_mpi [ 11.119992] xt_ndpi: Unknown symbol aeabi_uldivmod (err 0) [ 11.182098] kmodloader: failed to load xt_ndpi [ 11.194212] usbcore: registered new interface driver brcmfmac [ 11.202908] usbcore: registered new interface driver ipw [ 11.209580] usbserial: USB Serial support registered for IPWireless converter [ 11.219403] usbcore: registered new interface driver option [ 11.226542] usbserial: USB Serial support registered for GSM modem (1-port) [ 11.236347] usbcore: registered new interface driver qcserial [ 11.243553] usbserial: USB Serial support registered for Qualcomm USB modem [ 11.262641] usbcore: registered new interface driver rt2800usb [ 11.282179] usbcore: registered new interface driver rtl8192cu [ 11.289680] kmodloader: 1 module could not be probed [ 11.296398] kmodloader: - xt_ndpi - 0 [ 15.581827] random: crng init done [ 15.586873] random: 6 urandom warning(s) missed due to ratelimiting [ 17.033219] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 18.620758] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [40651.450910] IPv6: ADDRCONF(NETDEV_UP): sit0: link is not ready [40651.458571] IPv6: ADDRCONF(NETDEV_UP): ifb0: link is not ready [40651.466164] IPv6: ADDRCONF(NETDEV_UP): ifb1: link is not ready

System log : Sun Jan 27 21:40:49 2019 daemon.info dnsmasq-dhcp[4564]: DHCPDISCOVER(eth0) XX:XX:XX:XX:XX:XX Sun Jan 27 21:40:49 2019 daemon.info dnsmasq-dhcp[4564]: DHCPOFFER(eth0) 192.168.100.121 XX:XX:XX:XX:XX:XX Sun Jan 27 21:40:49 2019 daemon.info dnsmasq-dhcp[4564]: DHCPREQUEST(eth0) 192.168.100.121 XX:XX:XX:XX:XX:XX Sun Jan 27 21:40:49 2019 daemon.info dnsmasq-dhcp[4564]: DHCPACK(eth0) 192.168.100.121 XX:XX:XX:XX:XX:XX Sun Jan 27 21:45:40 2019 daemon.err uhttpd[2003]: Failed to execute cbi dispatcher target for entry '/admin/services/omr-bypass/index'. Sun Jan 27 21:45:40 2019 daemon.err uhttpd[2003]: The called action terminated with an exception: Sun Jan 27 21:45:40 2019 daemon.err uhttpd[2003]: /usr/lib/lua/luci/model/cbi/omr-bypass.lua:90: bad argument #1 to 'lines' (/proc/net/xt_ndpi/proto: No such file or directory) Sun Jan 27 21:45:40 2019 daemon.err uhttpd[2003]: stack traceback: Sun Jan 27 21:45:40 2019 daemon.err uhttpd[2003]: [C]: in function 'lines' Sun Jan 27 21:45:40 2019 daemon.err uhttpd[2003]: /usr/lib/lua/luci/model/cbi/omr-bypass.lua:90: in function 'func' Sun Jan 27 21:45:40 2019 daemon.err uhttpd[2003]: /usr/lib/lua/luci/cbi.lua:66: in function 'load' Sun Jan 27 21:45:40 2019 daemon.err uhttpd[2003]: /usr/lib/lua/luci/dispatcher.lua:838: in function </usr/lib/lua/luci/dispatcher.lua:832>

[Ysurac]

It's à bug for 32bits arm in ndpi-netfilter. This Will be fixed with next release.

[Ysurac]

Fixed in latest release.