search

Ysurac / openmptcprouter

OpenMPTCProuter is an open source solution to aggregate multiple internet connections using Multipath TCP (MPTCP) on OpenWrt
https://www.openmptcprouter.com/
GNU General Public License v3.0
1.72k stars 252 forks source link

Fibocom FM350-GL Modem Not Recognized on Raspberry Pi 4B with OpenMPTCProuter #3421

Open AlekZo opened 1 week ago

AlekZo commented 1 week ago

Expected Behavior The Fibocom FM350-GL modem should be recognized and function correctly with the OpenMPTCProuter on my Raspberry Pi 4B, similar to its performance with OpenWRT.

Current Behavior When using OpenMPTCProuter, the Fibocom FM350-GL modem is not recognized and does not work. The same setup works perfectly with OpenWRT. I have checked the logs in Status->System log but did not find any relevant entries indicating recognition or issues with the modem.

Specifications

Additional Hardware:

AlekZo commented 1 week ago

I can provide more info if needed. Please help.

Ysurac commented 1 week ago

What protocol are you using ? ModemManager ? Via SSH, mmcli -L return only the Waveshare modem ? Do you have a USB powered hub ?

AlekZo commented 1 week ago

What protocol are you using ? ModemManager ? Via SSH, mmcli -L return only the Waveshare modem ? Do you have a USB powered hub ?

What protocol are you using? I use:

I created a "Fibocom" interface and set "/dev/ttyUSB4" as the Modem Port. I populated the APN and IPv4 as PDP, set custom DNS to 1.1.1.1 and 8.8.8.8, and added it to the WAN firewall.

Via SSH, does mmcli -L return only the Waveshare modem?

root@OpenMPTCProuter:~# mmcli -L
No modems were found

I have an m.2 FM350-GL modem with a Waveshare USB adapter (this one: https://www.waveshare.com/usb-to-m.2-b-key.htm).

Do you have a USB-powered hub? I have a 30 cm cable with a USB female (power + data) and two male ports (one for power and data, and another for auxiliary power supply) (the same as shown in the Cable Upgrade screenshot here: https://www.waveshare.com/usb-to-m.2-b-key.htm).

Additional information: In OpenWRT, it worked with the same protocol (fm350-modem and luci-proto-fm350) and without an auxiliary power supply. On OpenMPTCProuter, I tried both with the auxiliary power supply (plugged into a USB 2.0 port on my Raspberry Pi) and without the auxiliary power supply.

I have added this repo to install fm350-modem and luci-proto-fm350

#!/bin/sh
. /etc/openwrt_release
cd /tmp
opkg update
wget http://openwrt.132lan.ru/packages/21.02/packages/repo.pub
opkg-key add repo.pub
if [ ! "$(grep modemfeed /etc/opkg/customfeeds.conf)" ]; then
    echo "src/gz modemfeed http://openwrt.132lan.ru/packages/21.02/packages/${DISTRIB_ARCH}/modemfeed" >> /etc/opkg/customfeeds.conf
fi
opkg update

System Log

`Jun 21 10:34:03 OpenMPTCProuter user.notice ucitrack: Setting up /etc/config/omr-tracker reload dependency on /etc/config/shadowsocks-libev
Jun 21 10:34:03 OpenMPTCProuter user.notice ucitrack: Setting up /etc/config/mlvpn reload trigger for non-procd /etc/init.d/mlvpn
Jun 21 10:34:04 OpenMPTCProuter daemon.info ModemManager[5782]: hotplug: checking if ModemManager is available...
Jun 21 10:34:04 OpenMPTCProuter daemon.info ModemManager[5783]: hotplug: Checking if ModemManager is available...
Jun 21 10:34:04 OpenMPTCProuter daemon.warn [5798]: <wrn> [wlan0] invalid sysfs path read for net/wlan0
Jun 21 10:34:04 OpenMPTCProuter daemon.warn [5798]: <wrn> [base-manager] couldn't handle kernel event: device net/wlan0 not found
Jun 21 10:34:04 OpenMPTCProuter daemon.err ModemManager[5782]: hotplug: Couldn't report kernel event: error: couldn't report kernel event: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.InvalidArgs: Invalid arguments: device net/wlan0 not found'
Jun 21 10:34:04 OpenMPTCProuter user.notice unbound: default memory configuration
Jun 21 10:34:04 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='ifb4wan2'
Jun 21 10:34:04 OpenMPTCProuter daemon.info ModemManager[7240]: hotplug: remove network interface ifb4wan2: event processed
Jun 21 10:34:04 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_9698c'
Jun 21 10:34:04 OpenMPTCProuter daemon.err glorytun: Key empty
Jun 21 10:34:04 OpenMPTCProuter daemon.info ModemManager[7405]: hotplug: add network interface SQM_IFB_9698c: event processed
Jun 21 10:34:04 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_9698c'
Jun 21 10:34:04 OpenMPTCProuter daemon.info ModemManager[7658]: hotplug: remove network interface SQM_IFB_9698c: event processed
Jun 21 10:34:04 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_f942a'
Jun 21 10:34:04 OpenMPTCProuter daemon.notice wpa_supplicant[2650]: phy0-sta0: Trying to associate with 50:ff:20:a6:de:a2 (SSID='Keenetic-8509' freq=2427 MHz)
Jun 21 10:34:04 OpenMPTCProuter daemon.warn wpa_supplicant[2650]: FT: Invalid key management type (2)
Jun 21 10:34:04 OpenMPTCProuter daemon.notice unbound: [7502:0] notice: init module 0: validator
Jun 21 10:34:04 OpenMPTCProuter daemon.notice unbound: [7502:0] notice: init module 1: iterator
Jun 21 10:34:04 OpenMPTCProuter daemon.info unbound: [7502:0] info: start of service (unbound 1.19.0).
Jun 21 10:34:04 OpenMPTCProuter daemon.info ModemManager[7704]: hotplug: add network interface SQM_IFB_f942a: event processed
Jun 21 10:34:04 OpenMPTCProuter user.notice firewall: Reloading firewall due to ifup of wan2 (wan2)
Jun 21 10:34:04 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_f942a'
Jun 21 10:34:04 OpenMPTCProuter daemon.info ModemManager[7992]: hotplug: remove network interface SQM_IFB_f942a: event processed
Jun 21 10:34:04 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='ifb4wan2'
Jun 21 10:34:04 OpenMPTCProuter daemon.notice netifd: Network device 'phy0-sta0' link is up
Jun 21 10:34:04 OpenMPTCProuter daemon.notice netifd: Interface 'wwan' has link connectivity 
Jun 21 10:34:04 OpenMPTCProuter daemon.notice wpa_supplicant[2650]: phy0-sta0: Associated with 50:ff:20:a6:de:a2
Jun 21 10:34:04 OpenMPTCProuter daemon.notice wpa_supplicant[2650]: phy0-sta0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Jun 21 10:34:04 OpenMPTCProuter daemon.notice wpa_supplicant[2650]: phy0-sta0: WPA: Key negotiation completed with 50:ff:20:a6:de:a2 [PTK=CCMP GTK=CCMP]
Jun 21 10:34:04 OpenMPTCProuter daemon.notice wpa_supplicant[2650]: phy0-sta0: CTRL-EVENT-CONNECTED - Connection to 50:ff:20:a6:de:a2 completed [id=0 id_str=]
Jun 21 10:34:04 OpenMPTCProuter daemon.info ModemManager[8033]: hotplug: add network interface ifb4wan2: event processed
Jun 21 10:34:05 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:34:05 OpenMPTCProuter daemon.notice netifd: Network device 'eth0' link is up
Jun 21 10:34:05 OpenMPTCProuter daemon.notice netifd: Interface 'lan' has link connectivity 
Jun 21 10:34:05 OpenMPTCProuter daemon.notice netifd: macvlan 'wan1' link is up
Jun 21 10:34:05 OpenMPTCProuter daemon.notice netifd: Interface 'wan1' has link connectivity 
Jun 21 10:34:05 OpenMPTCProuter daemon.notice netifd: macvlan 'wan2' link is up
Jun 21 10:34:05 OpenMPTCProuter daemon.notice netifd: Interface 'wan2' has link connectivity 
Jun 21 10:34:05 OpenMPTCProuter daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(eth0) 192.168.100.194 68:1d:ef:3d:9c:59 
Jun 21 10:34:05 OpenMPTCProuter daemon.info dnsmasq-dhcp[1]: DHCPACK(eth0) 192.168.100.194 68:1d:ef:3d:9c:59 WIN-IOS6RKH7DGL
Jun 21 10:34:05 OpenMPTCProuter daemon.warn dnsmasq-dhcp[1]: DHCP packet received on wan1 which has no address
Jun 21 10:34:05 OpenMPTCProuter daemon.warn dnsmasq-dhcp[1]: DHCP packet received on wan2 which has no address
Jun 21 10:34:05 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:34:06 OpenMPTCProuter user.notice unbound: default memory configuration
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Jun 21 10:34:06 OpenMPTCProuter daemon.err procd: Got unexpected signal 1
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: DNS service limited to local subnets
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP conntrack no-ipset nftset auth cryptohash DNSSEC no-ID loop-detect inotify dumpfile
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.100.100 -- 192.168.100.249, lease time 12h
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using nameserver 127.0.0.1#5353
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for test
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for onion
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for local
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for bind
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for use-application-dns.net
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for lan
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: using 1 more local addresses
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 names
Jun 21 10:34:06 OpenMPTCProuter daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Jun 21 10:34:07 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:34:07 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:34:07 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:34:07 OpenMPTCProuter user.notice omr-tracker: Launching...
Jun 21 10:34:13 OpenMPTCProuter user.notice omr-tracker: Launched
Jun 21 10:34:14 OpenMPTCProuter user.notice post-tracking-001-post-tracking: omrvpn down
Jun 21 10:34:14 OpenMPTCProuter daemon.err usbmuxd[10808]: [10:34:14.321][3] usbmuxd v1.1.1 starting up
Jun 21 10:34:14 OpenMPTCProuter daemon.err usbmuxd[10808]: [10:34:14.322][3] Using libusb 1.0.26
Jun 21 10:34:14 OpenMPTCProuter daemon.err usbmuxd[10808]: [10:34:14.322][3] Initialization complete
Jun 21 10:34:14 OpenMPTCProuter daemon.err usbmuxd[10808]: [10:34:14.322][3] Enabled exit on SIGUSR1 if no devices are attached. Start a new instance with "--exit" to trigger.
Jun 21 10:34:14 OpenMPTCProuter user.notice post-tracking-001-post-tracking: Glorytun VPN down, restart it
Jun 21 10:34:14 OpenMPTCProuter daemon.err glorytun: Key empty
Jun 21 10:34:16 OpenMPTCProuter daemon.err uhttpd[5414]: [info] luci: accepted login on / for root from 192.168.100.194
Jun 21 10:34:22 OpenMPTCProuter user.notice omr-bypass: Starting OMR-ByPass...
Jun 21 10:34:24 OpenMPTCProuter daemon.notice netifd: Interface 'wwan' is enabled
Jun 21 10:34:24 OpenMPTCProuter daemon.notice netifd: Interface 'wwan' is setting up now
Jun 21 10:34:24 OpenMPTCProuter daemon.notice netifd: wwan (12739): udhcpc: started, v1.36.1
Jun 21 10:34:24 OpenMPTCProuter daemon.notice netifd: wwan (12739): udhcpc: broadcasting discover
Jun 21 10:34:24 OpenMPTCProuter daemon.notice netifd: wwan (12739): udhcpc: broadcasting select for 192.168.1.92, server 192.168.1.1
Jun 21 10:34:25 OpenMPTCProuter daemon.notice netifd: wwan (12739): udhcpc: lease of 192.168.1.92 obtained from 192.168.1.1, lease time 25200
Jun 21 10:34:25 OpenMPTCProuter daemon.notice netifd: Interface 'wwan' is now up
Jun 21 10:34:25 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:34:25 OpenMPTCProuter user.notice firewall: Reloading firewall due to ifup of wwan (phy0-sta0)
Jun 21 10:34:25 OpenMPTCProuter user.notice omr-bypass: OMR-ByPass is running
Jun 21 10:34:25 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='eth1'
Jun 21 10:34:25 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:34:26 OpenMPTCProuter daemon.info ModemManager[13547]: hotplug: add network interface eth1: event processed
Jun 21 10:34:26 OpenMPTCProuter daemon.info unbound: [7502:0] info: generate keytag query _ta-4f66. NULL IN
Jun 21 10:34:26 OpenMPTCProuter daemon.info ModemManager[14362]: hotplug: add serial interface ttyUSB0: event processed
Jun 21 10:34:26 OpenMPTCProuter daemon.warn [5798]: <wrn> [base-manager] additional port ttyUSB0 in device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2' added after device probing has already finished
Jun 21 10:34:26 OpenMPTCProuter daemon.info [5798]: <inf> [base-manager] last device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2' probing had failed, will retry
Jun 21 10:34:26 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:34:26 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:34:26 OpenMPTCProuter daemon.info ModemManager[14712]: hotplug: add serial interface ttyUSB1: event processed
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8176] N: ttyd 1.7.3 (libwebsockets 4.3.2-unknown)
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8177] N: tty configuration:
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8177] N:   start command: /bin/login
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8178] N:   close signal: SIGHUP (1)
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8178] N:   terminal type: xterm-256color
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8235] N:    /usr/lib/libwebsockets-evlib_uv.so
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8237] N: lws_create_context: LWS: 4.3.2-unknown, NET CLI SRV H1 H2 WS ConMon IPV6-off
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8238] N: elops_init_pt_uv:  Using foreign event loop...
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8239] N: __lws_lc_tag:  ++ [wsi|0|pipe] (1)
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8241] N: __lws_lc_tag:  ++ [vh|0|netlink] (1)
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8242] N: __lws_lc_tag:  ++ [vh|1|default|eth0|eth0|7681] (2)
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8249] N: [vh|1|default|eth0|eth0|7681]: lws_socket_bind: source ads 192.168.100.1
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8251] N: __lws_lc_tag:  ++ [wsi|1|listen|default|eth0|7681] (2)
Jun 21 10:34:26 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:34:26:8252] N:  Listening on port: 7681
Jun 21 10:34:26 OpenMPTCProuter daemon.info ModemManager[15203]: hotplug: add serial interface ttyUSB2: event processed
Jun 21 10:34:26 OpenMPTCProuter daemon.info procd: - init complete -
Jun 21 10:34:27 OpenMPTCProuter daemon.info ModemManager[15526]: hotplug: add serial interface ttyUSB3: event processed
Jun 21 10:34:27 OpenMPTCProuter daemon.info ModemManager[15765]: hotplug: add serial interface ttyUSB4: event processed
Jun 21 10:34:27 OpenMPTCProuter daemon.info ModemManager[16068]: hotplug: add serial interface ttyUSB5: event processed
Jun 21 10:34:44 OpenMPTCProuter daemon.info ModemManager[16428]: hotplug: add serial interface ttyUSB6: event processed
Jun 21 10:34:44 OpenMPTCProuter daemon.info ModemManager[16706]: hotplug: add serial interface ttyUSB7: event processed
Jun 21 10:34:45 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:34:46 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:34:46 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='ifb4wan1'
Jun 21 10:34:46 OpenMPTCProuter daemon.info ModemManager[17729]: hotplug: remove network interface ifb4wan1: event processed
Jun 21 10:34:46 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='ifb4wan2'
Jun 21 10:34:46 OpenMPTCProuter daemon.info ModemManager[17767]: hotplug: remove network interface ifb4wan2: event processed
Jun 21 10:34:46 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_b734e'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[17844]: hotplug: add network interface SQM_IFB_b734e: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_b734e'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[17909]: hotplug: remove network interface SQM_IFB_b734e: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_1d736'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[17926]: hotplug: add network interface SQM_IFB_1d736: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_1d736'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[18068]: hotplug: remove network interface SQM_IFB_1d736: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='ifb4wan1'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[18113]: hotplug: add network interface ifb4wan1: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_b9d56'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[18188]: hotplug: add network interface SQM_IFB_b9d56: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_b9d56'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[18262]: hotplug: remove network interface SQM_IFB_b9d56: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_5e7ee'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[18332]: hotplug: add network interface SQM_IFB_5e7ee: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_5e7ee'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[18437]: hotplug: remove network interface SQM_IFB_5e7ee: event processed
Jun 21 10:34:47 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='ifb4wan2'
Jun 21 10:34:47 OpenMPTCProuter daemon.info ModemManager[18451]: hotplug: add network interface ifb4wan2: event processed
Jun 21 10:34:50 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='eth1'
Jun 21 10:34:50 OpenMPTCProuter daemon.info ModemManager[18550]: hotplug: remove network interface eth1: event processed
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [ttyUSB2/at] failed to open serial device
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB2: error when checking support with plugin 'via': (tty/ttyUSB2) failed to open port: Could not lock serial device ttyUSB2: I/O error
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB1: error when checking support with plugin 'via': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB0: error when checking support with plugin 'via': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB2: error when checking support with plugin 'u-blox': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB1: error when checking support with plugin 'u-blox': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB0: error when checking support with plugin 'u-blox': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB2: error when checking support with plugin 'telit': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB1: error when checking support with plugin 'telit': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB0: error when checking support with plugin 'telit': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB2: error when checking support with plugin 'quectel': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB1: error when checking support with plugin 'quectel': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB0: error when checking support with plugin 'quectel': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [ttyUSB7/at] failed to open serial device
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB7: error when checking support with plugin 'u-blox': (tty/ttyUSB7) failed to open port: Could not lock serial device ttyUSB7: I/O error
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB6: error when checking support with plugin 'u-blox': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB5: error when checking support with plugin 'u-blox': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB4: error when checking support with plugin 'u-blox': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB3: error when checking support with plugin 'u-blox': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB2: error when checking support with plugin 'nokia': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB1: error when checking support with plugin 'nokia': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB0: error when checking support with plugin 'nokia': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] port eth1 released by device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2'
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,eth1: failed: Operation was cancelled
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB7: error when checking support with plugin 'telit': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB6: error when checking support with plugin 'telit': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB5: error when checking support with plugin 'telit': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB4: error when checking support with plugin 'telit': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB3: error when checking support with plugin 'telit': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB2: error when checking support with plugin 'iridium': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB1: error when checking support with plugin 'iridium': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB0: error when checking support with plugin 'iridium': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB7: error when checking support with plugin 'quectel': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB6: error when checking support with plugin 'quectel': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB5: error when checking support with plugin 'quectel': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB4: error when checking support with plugin 'quectel': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB3: error when checking support with plugin 'quectel': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB2: error when checking support with plugin 'cinterion': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB1: error when checking support with plugin 'cinterion': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB0: error when checking support with plugin 'cinterion': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB7: error when checking support with plugin 'nokia': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB6: error when checking support with plugin 'nokia': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB5: error when checking support with plugin 'nokia': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB4: error when checking support with plugin 'nokia': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB3: error when checking support with plugin 'nokia': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB2: error when checking support with plugin 'generic': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB1: error when checking support with plugin 'generic': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB0: error when checking support with plugin 'generic': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB7: error when checking support with plugin 'iridium': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB6: error when checking support with plugin 'iridium': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB5: error when checking support with plugin 'iridium': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB4: error when checking support with plugin 'iridium': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB3: error when checking support with plugin 'iridium': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB7: error when checking support with plugin 'cinterion': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB6: error when checking support with plugin 'cinterion': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB5: error when checking support with plugin 'cinterion': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB4: error when checking support with plugin 'cinterion': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB3: error when checking support with plugin 'cinterion': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB7: error when checking support with plugin 'generic': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB6: error when checking support with plugin 'generic': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB5: error when checking support with plugin 'generic': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB4: error when checking support with plugin 'generic': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 0,ttyUSB3: error when checking support with plugin 'generic': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:34:55 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] couldn't check support for device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2': not supported by any plugin
Jun 21 10:34:55 OpenMPTCProuter daemon.info ModemManager[18989]: hotplug: remove serial interface ttyUSB0: event processed
Jun 21 10:34:55 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] port ttyUSB0 released by device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2'
Jun 21 10:34:55 OpenMPTCProuter daemon.info ModemManager[19116]: hotplug: remove serial interface ttyUSB1: event processed
Jun 21 10:34:55 OpenMPTCProuter daemon.info ModemManager[19284]: hotplug: remove serial interface ttyUSB2: event processed
Jun 21 10:34:55 OpenMPTCProuter daemon.info ModemManager[19413]: hotplug: remove serial interface ttyUSB3: event processed
Jun 21 10:34:56 OpenMPTCProuter daemon.info ModemManager[19540]: hotplug: remove serial interface ttyUSB4: event processed
Jun 21 10:34:56 OpenMPTCProuter daemon.info ModemManager[19667]: hotplug: remove serial interface ttyUSB5: event processed
Jun 21 10:34:56 OpenMPTCProuter daemon.info ModemManager[19991]: hotplug: remove serial interface ttyUSB6: event processed
Jun 21 10:34:56 OpenMPTCProuter daemon.info ModemManager[20117]: hotplug: remove serial interface ttyUSB7: event processed
Jun 21 10:35:10 OpenMPTCProuter daemon.info ModemManager[21028]: hotplug: add serial interface ttyACM0: event processed
Jun 21 10:35:15 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:35:16 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:35:16 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info: service stopped (unbound 1.19.0).
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info: server stats for thread 0: 10 queries, 0 answers from cache, 10 recursions, 0 prefetch, 0 rejected by ip ratelimiting
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info: server stats for thread 0: requestlist max 4 avg 1.4 exceeded 0 jostled 0
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info: average recursion processing time 0.156766 sec
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info: histogram of recursion processing times
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info: [25%]=0.0354987 median[50%]=0.049152 [75%]=0.0628053
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info: lower(secs) upper(secs) recursions
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info:    0.001024    0.002048 2
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info:    0.032768    0.065536 6
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info:    0.262144    0.524288 1
Jun 21 10:35:17 OpenMPTCProuter daemon.info unbound: [7502:0] info:    0.524288    1.000000 1
Jun 21 10:35:17 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:35:18 OpenMPTCProuter daemon.err glorytun: Key empty
Jun 21 10:35:18 OpenMPTCProuter daemon.notice unbound: [23517:0] notice: init module 0: validator
Jun 21 10:35:18 OpenMPTCProuter daemon.notice unbound: [23517:0] notice: init module 1: iterator
Jun 21 10:35:18 OpenMPTCProuter user.notice omr-tracker: Launching...
Jun 21 10:35:18 OpenMPTCProuter daemon.info unbound: [23517:0] info: start of service (unbound 1.19.0).
Jun 21 10:35:24 OpenMPTCProuter user.notice omr-tracker: Launched
Jun 21 10:35:24 OpenMPTCProuter user.notice post-tracking-001-post-tracking: omrvpn down
Jun 21 10:35:24 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:35:24 OpenMPTCProuter daemon.notice netifd: MyModem (24575): Setup fm350 interface MyModem with port /dev/ttyUSB4
Jun 21 10:35:25 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:35:25:0335] N: rops_handle_POLLIN_netlink: DELADDR
Jun 21 10:35:25 OpenMPTCProuter daemon.notice ttyd[14851]: [2024/06/21 10:35:25:0688] N: rops_handle_POLLIN_netlink: DELADDR
Jun 21 10:35:25 OpenMPTCProuter user.notice post-tracking-001-post-tracking: Glorytun VPN down, restart it
Jun 21 10:35:25 OpenMPTCProuter daemon.err glorytun: Key empty
Jun 21 10:35:26 OpenMPTCProuter daemon.info ModemManager[25030]: hotplug: remove serial interface ttyACM0: event processed
Jun 21 10:35:26 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] port ttyACM0 released by device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2'
Jun 21 10:35:26 OpenMPTCProuter daemon.notice netifd: MyModem (25156): Modem /dev/ttyUSB4 disconnected
Jun 21 10:35:26 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is now down
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='ifb4wan1'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[25663]: hotplug: remove network interface ifb4wan1: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='ifb4wan2'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[25701]: hotplug: remove network interface ifb4wan2: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_c9cca'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[25778]: hotplug: add network interface SQM_IFB_c9cca: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_c9cca'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[25845]: hotplug: remove network interface SQM_IFB_c9cca: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_5280c'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[25859]: hotplug: add network interface SQM_IFB_5280c: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_5280c'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[25950]: hotplug: remove network interface SQM_IFB_5280c: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='ifb4wan1'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[26012]: hotplug: add network interface ifb4wan1: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_f0960'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[26115]: hotplug: add network interface SQM_IFB_f0960: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_f0960'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[26180]: hotplug: remove network interface SQM_IFB_f0960: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='SQM_IFB_d74b2'
Jun 21 10:35:27 OpenMPTCProuter daemon.info ModemManager[26213]: hotplug: add network interface SQM_IFB_d74b2: event processed
Jun 21 10:35:27 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='SQM_IFB_d74b2'
Jun 21 10:35:28 OpenMPTCProuter daemon.info ModemManager[26407]: hotplug: remove network interface SQM_IFB_d74b2: event processed
Jun 21 10:35:28 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='ifb4wan2'
Jun 21 10:35:28 OpenMPTCProuter daemon.info ModemManager[26459]: hotplug: add network interface ifb4wan2: event processed
Jun 21 10:35:28 OpenMPTCProuter user.notice omr-tracker: Launching...
Jun 21 10:35:28 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:35:28 OpenMPTCProuter daemon.notice netifd: MyModem (26828): Setup fm350 interface MyModem with port /dev/ttyUSB4
Jun 21 10:35:28 OpenMPTCProuter daemon.info ModemManager[26933]: hotplug: add serial interface ttyACM0: event processed
Jun 21 10:35:29 OpenMPTCProuter daemon.info ModemManager[27186]: hotplug: remove serial interface ttyACM0: event processed
Jun 21 10:35:29 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] port ttyACM0 released by device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2'
Jun 21 10:35:29 OpenMPTCProuter daemon.notice netifd: MyModem (27305): Modem /dev/ttyUSB4 disconnected
Jun 21 10:35:29 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is now down
Jun 21 10:35:34 OpenMPTCProuter user.notice omr-tracker: Launched
Jun 21 10:35:34 OpenMPTCProuter user.notice post-tracking-001-post-tracking: omrvpn down
Jun 21 10:35:34 OpenMPTCProuter daemon.err glorytun: Key empty
Jun 21 10:35:35 OpenMPTCProuter user.notice post-tracking-001-post-tracking: Glorytun VPN down, restart it
Jun 21 10:35:35 OpenMPTCProuter daemon.err glorytun: Key empty
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Jun 21 10:35:35 OpenMPTCProuter daemon.err procd: Got unexpected signal 1
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: DNS service limited to local subnets
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP conntrack no-ipset nftset auth cryptohash DNSSEC no-ID loop-detect inotify dumpfile
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.100.100 -- 192.168.100.249, lease time 12h
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using nameserver 127.0.0.1#5353
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for test
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for onion
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for local
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for bind
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for use-application-dns.net
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using only locally-known addresses for lan
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: using 1 more local addresses
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 names
Jun 21 10:35:35 OpenMPTCProuter daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Jun 21 10:35:38 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:35:38 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:35:39 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:35:39 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:35:40 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:35:40 OpenMPTCProuter daemon.notice netifd: MyModem (31237): Setup fm350 interface MyModem with port /dev/ttyUSB4
Jun 21 10:35:40 OpenMPTCProuter daemon.info ModemManager[31320]: hotplug: add serial interface ttyACM0: event processed
Jun 21 10:35:41 OpenMPTCProuter daemon.info ModemManager[31608]: hotplug: remove serial interface ttyACM0: event processed
Jun 21 10:35:41 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] port ttyACM0 released by device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2'
Jun 21 10:35:41 OpenMPTCProuter daemon.notice netifd: MyModem (31733): Modem /dev/ttyUSB4 disconnected
Jun 21 10:35:41 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is now down
Jun 21 10:35:43 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:35:43 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:36:00 OpenMPTCProuter user.notice omr-schedule-010-services: Can't find omr-bypass rules, restart omr-bypass...
Jun 21 10:36:00 OpenMPTCProuter user.notice omr-bypass: Starting OMR-ByPass...
Jun 21 10:36:02 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:36:02 OpenMPTCProuter daemon.notice netifd: MyModem (2359): Setup fm350 interface MyModem with port /dev/ttyUSB4
Jun 21 10:36:02 OpenMPTCProuter user.notice firewall.omr-server: Firewall reload, set server part firewall reloading
Jun 21 10:36:03 OpenMPTCProuter user.notice omr-bypass: OMR-ByPass is running
Jun 21 10:36:07 OpenMPTCProuter daemon.notice netifd: MyModem (2359): Device path not found!
Jun 21 10:36:07 OpenMPTCProuter daemon.notice netifd: MyModem (2845): Modem /dev/ttyUSB4 disconnected
Jun 21 10:36:07 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is now down
Jun 21 10:36:07 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:36:07 OpenMPTCProuter daemon.notice netifd: MyModem (2852): Setup fm350 interface MyModem with port /dev/ttyUSB4
Jun 21 10:36:08 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:36:08 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:36:12 OpenMPTCProuter daemon.notice netifd: MyModem (2852): Device path not found!
Jun 21 10:36:12 OpenMPTCProuter daemon.notice netifd: MyModem (4069): Modem /dev/ttyUSB4 disconnected
Jun 21 10:36:12 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is now down
Jun 21 10:36:12 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:36:12 OpenMPTCProuter daemon.notice netifd: MyModem (4076): Setup fm350 interface MyModem with port /dev/ttyUSB4
Jun 21 10:36:13 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:36:13 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:36:15 OpenMPTCProuter user.notice NET: hotplug (iface): action='add' interface='eth1'
Jun 21 10:36:15 OpenMPTCProuter daemon.info ModemManager[5262]: hotplug: add network interface eth1: event processed
Jun 21 10:36:16 OpenMPTCProuter daemon.info ModemManager[5627]: hotplug: add serial interface ttyUSB0: event processed
Jun 21 10:36:16 OpenMPTCProuter daemon.warn [5798]: <wrn> [base-manager] additional port ttyUSB0 in device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2' added after device probing has already finished
Jun 21 10:36:16 OpenMPTCProuter daemon.info [5798]: <inf> [base-manager] last device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2' probing had failed, will retry
Jun 21 10:36:16 OpenMPTCProuter daemon.info ModemManager[5760]: hotplug: add serial interface ttyUSB1: event processed
Jun 21 10:36:16 OpenMPTCProuter daemon.info ModemManager[5893]: hotplug: add serial interface ttyUSB2: event processed
Jun 21 10:36:16 OpenMPTCProuter daemon.info ModemManager[6023]: hotplug: add serial interface ttyUSB3: event processed
Jun 21 10:36:16 OpenMPTCProuter daemon.info ModemManager[6155]: hotplug: add serial interface ttyUSB4: event processed
Jun 21 10:36:17 OpenMPTCProuter daemon.notice netifd: MyModem (4076): Device path not found!
Jun 21 10:36:17 OpenMPTCProuter daemon.info ModemManager[6291]: hotplug: add serial interface ttyUSB5: event processed
Jun 21 10:36:17 OpenMPTCProuter daemon.info ModemManager[6424]: hotplug: add serial interface ttyUSB6: event processed
Jun 21 10:36:17 OpenMPTCProuter daemon.info ModemManager[6554]: hotplug: add serial interface ttyUSB7: event processed
Jun 21 10:36:18 OpenMPTCProuter daemon.notice netifd: MyModem (6261): Modem /dev/ttyUSB4 disconnected
Jun 21 10:36:18 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is now down
Jun 21 10:36:18 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:36:18 OpenMPTCProuter daemon.notice netifd: MyModem (6680): Setup fm350 interface MyModem with port /dev/ttyUSB4
Jun 21 10:36:18 OpenMPTCProuter daemon.notice netifd: MyModem (6680): Found path /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2/2-2:1.6/ttyUSB4
Jun 21 10:36:18 OpenMPTCProuter daemon.notice netifd: MyModem (6680): Found interface eth1
Jun 21 10:36:18 OpenMPTCProuter daemon.notice netifd: MyModem (6680): Setting up eth1
Jun 21 10:36:19 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:36:19 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:36:23 OpenMPTCProuter user.notice NET: hotplug (iface): action='remove' interface='eth1'
Jun 21 10:36:23 OpenMPTCProuter daemon.info ModemManager[7812]: hotplug: remove network interface eth1: event processed
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [ttyUSB6/at] failed to open serial device
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB6: error when checking support with plugin 'u-blox': (tty/ttyUSB6) failed to open port: Could not lock serial device ttyUSB6: I/O error
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB5: error when checking support with plugin 'u-blox': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB4: error when checking support with plugin 'u-blox': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB3: error when checking support with plugin 'u-blox': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB2: error when checking support with plugin 'u-blox': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB1: error when checking support with plugin 'u-blox': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB0: error when checking support with plugin 'u-blox': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB6: error when checking support with plugin 'telit': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB5: error when checking support with plugin 'telit': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB4: error when checking support with plugin 'telit': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB3: error when checking support with plugin 'telit': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB2: error when checking support with plugin 'telit': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB1: error when checking support with plugin 'telit': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB0: error when checking support with plugin 'telit': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] port eth1 released by device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2'
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,eth1: failed: Operation was cancelled
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB6: error when checking support with plugin 'quectel': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB5: error when checking support with plugin 'quectel': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB4: error when checking support with plugin 'quectel': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB3: error when checking support with plugin 'quectel': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB2: error when checking support with plugin 'quectel': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB1: error when checking support with plugin 'quectel': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB0: error when checking support with plugin 'quectel': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB6: error when checking support with plugin 'nokia': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB5: error when checking support with plugin 'nokia': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB4: error when checking support with plugin 'nokia': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB3: error when checking support with plugin 'nokia': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB2: error when checking support with plugin 'nokia': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB1: error when checking support with plugin 'nokia': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB0: error when checking support with plugin 'nokia': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB6: error when checking support with plugin 'iridium': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB5: error when checking support with plugin 'iridium': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB4: error when checking support with plugin 'iridium': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB3: error when checking support with plugin 'iridium': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB2: error when checking support with plugin 'iridium': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB1: error when checking support with plugin 'iridium': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB0: error when checking support with plugin 'iridium': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [ttyUSB7/at] failed to open serial device
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB7: error when checking support with plugin 'telit': (tty/ttyUSB7) failed to open port: Could not lock serial device ttyUSB7: I/O error
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB6: error when checking support with plugin 'cinterion': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB5: error when checking support with plugin 'cinterion': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB4: error when checking support with plugin 'cinterion': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB3: error when checking support with plugin 'cinterion': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB2: error when checking support with plugin 'cinterion': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB1: error when checking support with plugin 'cinterion': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB0: error when checking support with plugin 'cinterion': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB7: error when checking support with plugin 'quectel': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such device or address
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB6: error when checking support with plugin 'generic': (tty/ttyUSB6) failed to open port: Could not open serial device ttyUSB6: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB5: error when checking support with plugin 'generic': (tty/ttyUSB5) failed to open port: Could not open serial device ttyUSB5: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB4: error when checking support with plugin 'generic': (tty/ttyUSB4) failed to open port: Could not open serial device ttyUSB4: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB3: error when checking support with plugin 'generic': (tty/ttyUSB3) failed to open port: Could not open serial device ttyUSB3: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB2: error when checking support with plugin 'generic': (tty/ttyUSB2) failed to open port: Could not open serial device ttyUSB2: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB1: error when checking support with plugin 'generic': (tty/ttyUSB1) failed to open port: Could not open serial device ttyUSB1: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB0: error when checking support with plugin 'generic': (tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB7: error when checking support with plugin 'nokia': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB7: error when checking support with plugin 'iridium': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB7: error when checking support with plugin 'cinterion': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.warn [5798]: <wrn> [plugin-manager] task 1,ttyUSB7: error when checking support with plugin 'generic': (tty/ttyUSB7) failed to open port: Could not open serial device ttyUSB7: No such file or directory
Jun 21 10:36:28 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] couldn't check support for device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2': not supported by any plugin
Jun 21 10:36:28 OpenMPTCProuter daemon.notice netifd: MyModem (8233): Modem /dev/ttyUSB4 disconnected
Jun 21 10:36:28 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is now down
Jun 21 10:36:28 OpenMPTCProuter daemon.info ModemManager[8371]: hotplug: remove serial interface ttyUSB0: event processed
Jun 21 10:36:28 OpenMPTCProuter daemon.notice [5798]: <msg> [base-manager] port ttyUSB0 released by device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2'
Jun 21 10:36:28 OpenMPTCProuter daemon.info ModemManager[8647]: hotplug: remove serial interface ttyUSB1: event processed
Jun 21 10:36:28 OpenMPTCProuter daemon.info ModemManager[8787]: hotplug: remove serial interface ttyUSB2: event processed
Jun 21 10:36:29 OpenMPTCProuter daemon.info ModemManager[8917]: hotplug: remove serial interface ttyUSB3: event processed
Jun 21 10:36:29 OpenMPTCProuter daemon.info ModemManager[9047]: hotplug: remove serial interface ttyUSB4: event processed
Jun 21 10:36:29 OpenMPTCProuter daemon.info ModemManager[9216]: hotplug: remove serial interface ttyUSB5: event processed
Jun 21 10:36:29 OpenMPTCProuter daemon.info ModemManager[9474]: hotplug: remove serial interface ttyUSB6: event processed
Jun 21 10:36:29 OpenMPTCProuter user.notice MPTCP: Set wan1 to master from wan1 is deactivated
Jun 21 10:36:29 OpenMPTCProuter user.notice MPTCP: Set wan2 to on from wan2 is deactivated
Jun 21 10:36:29 OpenMPTCProuter daemon.info ModemManager[9728]: hotplug: remove serial interface ttyUSB7: event processed
Jun 21 10:36:30 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:36:30 OpenMPTCProuter daemon.notice netifd: MyModem (10238): Setup fm350 interface MyModem with port /dev/ttyUSB4
Jun 21 10:36:35 OpenMPTCProuter daemon.notice netifd: MyModem (10238): Device path not found!
Jun 21 10:36:35 OpenMPTCProuter daemon.notice netifd: MyModem (10780): Modem /dev/ttyUSB4 disconnected
Jun 21 10:36:35 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is now down
Jun 21 10:36:35 OpenMPTCProuter daemon.notice netifd: Interface 'MyModem' is setting up now
Jun 21 10:36:35 OpenMPTCProuter daemon.notice netifd: MyModem (10787): Setup fm350 interface MyModem with port /dev/ttyUSB4

Core Log

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 6.1.71 (runner@fv-az1532-673) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r0+24843-acf40c022e) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Jan 16 14:55:02 2024
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[    0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
[    0.000000] percpu: Embedded 18 pages/cpu s32936 r8192 d32600 u73728
[    0.000000] pcpu-alloc: s32936 r8192 d32600 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 996912
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:12:1D:F2 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 coherent_pool=8M root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rw rootwait
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[    0.000000] Memory: 3825720K/4050944K available (8640K kernel code, 960K rwdata, 2312K rodata, 512K init, 559K bss, 159688K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000201] Console: colour dummy device 80x25
[    0.000540] printk: console [tty1] enabled
[    0.000582] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.000608] pid_max: default: 32768 minimum: 301
[    0.000852] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000926] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.001500] cgroup: Disabling memory control group subsystem
[    0.002469] cblist_init_generic: Setting adjustable number of callback queues.
[    0.002492] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.002688] rcu: Hierarchical SRCU implementation.
[    0.002704] rcu:     Max phase no-delay instances is 1000.
[    0.003382] smp: Bringing up secondary CPUs ...
[    0.003830] Detected PIPT I-cache on CPU1
[    0.003972] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.004465] Detected PIPT I-cache on CPU2
[    0.004582] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.005027] Detected PIPT I-cache on CPU3
[    0.005146] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.005219] smp: Brought up 1 node, 4 CPUs
[    0.005281] SMP: Total of 4 processors activated.
[    0.005294] CPU features: detected: 32-bit EL0 Support
[    0.005307] CPU features: detected: CRC32 instructions
[    0.005386] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.005404] CPU: All CPU(s) started at EL2
[    0.005414] alternatives: applying system-wide alternatives
[    0.007009] devtmpfs: initialized
[    0.015133] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.015193] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.016661] pinctrl core: initialized pinctrl subsystem
[    0.016981] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT
[    0.017782] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.019383] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.020203] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.020976] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.021438] thermal_sys: Registered thermal governor 'step_wise'
[    0.021480] cpuidle: using governor ladder
[    0.021518] cpuidle: using governor menu
[    0.021757] ASID allocator initialised with 65536 entries
[    0.021855] Serial: AMBA PL011 UART driver
[    0.026401] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.034010] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:39:16, variant start
[    0.044013] raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7
[    0.074884] cryptd: max_cpu_qlen set to 1000
[    0.075674] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.076920] reg-fixed-voltage cam1_regulator: GPIO lookup for consumer (null)
[    0.076933] reg-fixed-voltage cam1_regulator: using device tree for GPIO lookup
[    0.076954] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/cam1_regulator[0]'
[    0.076984] reg-fixed-voltage cam1_regulator: No GPIO consumer (null) found
[    0.077067] reg-fixed-voltage cam_dummy_reg: GPIO lookup for consumer (null)
[    0.077076] reg-fixed-voltage cam_dummy_reg: using device tree for GPIO lookup
[    0.077089] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/cam_dummy_reg[0]'
[    0.077109] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/cam_dummy_reg[0]'
[    0.077127] reg-fixed-voltage cam_dummy_reg: using lookup tables for GPIO lookup
[    0.077135] reg-fixed-voltage cam_dummy_reg: No GPIO consumer (null) found
[    0.077358] reg-fixed-voltage sd_vcc_reg: GPIO lookup for consumer (null)
[    0.077368] reg-fixed-voltage sd_vcc_reg: using device tree for GPIO lookup
[    0.077380] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/sd_vcc_reg[0]'
[    0.077404] reg-fixed-voltage sd_vcc_reg: No GPIO consumer (null) found
[    0.077485] reg-fixed-voltage fixedregulator_3v3: GPIO lookup for consumer (null)
[    0.077494] reg-fixed-voltage fixedregulator_3v3: using device tree for GPIO lookup
[    0.077506] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator_3v3[0]'
[    0.077526] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_3v3[0]'
[    0.077541] reg-fixed-voltage fixedregulator_3v3: using lookup tables for GPIO lookup
[    0.077549] reg-fixed-voltage fixedregulator_3v3: No GPIO consumer (null) found
[    0.077739] reg-fixed-voltage fixedregulator_5v0: GPIO lookup for consumer (null)
[    0.077749] reg-fixed-voltage fixedregulator_5v0: using device tree for GPIO lookup
[    0.077761] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator_5v0[0]'
[    0.077780] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_5v0[0]'
[    0.077795] reg-fixed-voltage fixedregulator_5v0: using lookup tables for GPIO lookup
[    0.077802] reg-fixed-voltage fixedregulator_5v0: No GPIO consumer (null) found
[    0.078097] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer (null)
[    0.078106] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup
[    0.078123] gpio-regulator sd_io_1v8_reg: No GPIO consumer (null) found
[    0.078411] SCSI subsystem initialized
[    0.078563] usbcore: registered new interface driver usbfs
[    0.078614] usbcore: registered new interface driver hub
[    0.078656] usbcore: registered new device driver usb
[    0.078735] usb_phy_generic phy: GPIO lookup for consumer reset
[    0.078744] usb_phy_generic phy: using device tree for GPIO lookup
[    0.078758] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/phy[0]'
[    0.078778] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/phy[0]'
[    0.078793] usb_phy_generic phy: using lookup tables for GPIO lookup
[    0.078801] usb_phy_generic phy: No GPIO consumer reset found
[    0.078808] usb_phy_generic phy: GPIO lookup for consumer vbus-detect
[    0.078816] usb_phy_generic phy: using device tree for GPIO lookup
[    0.078827] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/phy[0]'
[    0.078844] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/phy[0]'
[    0.078859] usb_phy_generic phy: using lookup tables for GPIO lookup
[    0.078866] usb_phy_generic phy: No GPIO consumer vbus-detect found
[    0.078891] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.079158] pps_core: LinuxPPS API ver. 1 registered
[    0.079173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.079199] PTP clock support registered
[    0.080378] clocksource: Switched to clocksource arch_sys_counter
[    0.086387] NET: Registered PF_INET protocol family
[    0.086964] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.091360] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.091431] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.091460] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.091689] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.092753] TCP: Hash tables configured (established 32768 bind 32768)
[    0.093184] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.093405] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.093479] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.093711] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.093773] PCI: CLS 0 bytes, default 64
[    0.095127] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.099834] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.164108] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.165531] pinctrl-bcm2835 fe200000.gpio: try to register 58 pins ...
[    0.165546] pinctrl core: registered pin 0 (gpio0) on pinctrl-bcm2711
[    0.165557] pinctrl core: registered pin 1 (gpio1) on pinctrl-bcm2711
[    0.165565] pinctrl core: registered pin 2 (gpio2) on pinctrl-bcm2711
[    0.165572] pinctrl core: registered pin 3 (gpio3) on pinctrl-bcm2711
[    0.165580] pinctrl core: registered pin 4 (gpio4) on pinctrl-bcm2711
[    0.165590] pinctrl core: registered pin 5 (gpio5) on pinctrl-bcm2711
[    0.165597] pinctrl core: registered pin 6 (gpio6) on pinctrl-bcm2711
[    0.165603] pinctrl core: registered pin 7 (gpio7) on pinctrl-bcm2711
[    0.165610] pinctrl core: registered pin 8 (gpio8) on pinctrl-bcm2711
[    0.165616] pinctrl core: registered pin 9 (gpio9) on pinctrl-bcm2711
[    0.165622] pinctrl core: registered pin 10 (gpio10) on pinctrl-bcm2711
[    0.165629] pinctrl core: registered pin 11 (gpio11) on pinctrl-bcm2711
[    0.165636] pinctrl core: registered pin 12 (gpio12) on pinctrl-bcm2711
[    0.165642] pinctrl core: registered pin 13 (gpio13) on pinctrl-bcm2711
[    0.165649] pinctrl core: registered pin 14 (gpio14) on pinctrl-bcm2711
[    0.165655] pinctrl core: registered pin 15 (gpio15) on pinctrl-bcm2711
[    0.165662] pinctrl core: registered pin 16 (gpio16) on pinctrl-bcm2711
[    0.165668] pinctrl core: registered pin 17 (gpio17) on pinctrl-bcm2711
[    0.165674] pinctrl core: registered pin 18 (gpio18) on pinctrl-bcm2711
[    0.165681] pinctrl core: registered pin 19 (gpio19) on pinctrl-bcm2711
[    0.165687] pinctrl core: registered pin 20 (gpio20) on pinctrl-bcm2711
[    0.165694] pinctrl core: registered pin 21 (gpio21) on pinctrl-bcm2711
[    0.165700] pinctrl core: registered pin 22 (gpio22) on pinctrl-bcm2711
[    0.165706] pinctrl core: registered pin 23 (gpio23) on pinctrl-bcm2711
[    0.165713] pinctrl core: registered pin 24 (gpio24) on pinctrl-bcm2711
[    0.165719] pinctrl core: registered pin 25 (gpio25) on pinctrl-bcm2711
[    0.165725] pinctrl core: registered pin 26 (gpio26) on pinctrl-bcm2711
[    0.165732] pinctrl core: registered pin 27 (gpio27) on pinctrl-bcm2711
[    0.165738] pinctrl core: registered pin 28 (gpio28) on pinctrl-bcm2711
[    0.165744] pinctrl core: registered pin 29 (gpio29) on pinctrl-bcm2711
[    0.165751] pinctrl core: registered pin 30 (gpio30) on pinctrl-bcm2711
[    0.165757] pinctrl core: registered pin 31 (gpio31) on pinctrl-bcm2711
[    0.165763] pinctrl core: registered pin 32 (gpio32) on pinctrl-bcm2711
[    0.165770] pinctrl core: registered pin 33 (gpio33) on pinctrl-bcm2711
[    0.165776] pinctrl core: registered pin 34 (gpio34) on pinctrl-bcm2711
[    0.165782] pinctrl core: registered pin 35 (gpio35) on pinctrl-bcm2711
[    0.165789] pinctrl core: registered pin 36 (gpio36) on pinctrl-bcm2711
[    0.165799] pinctrl core: registered pin 37 (gpio37) on pinctrl-bcm2711
[    0.165805] pinctrl core: registered pin 38 (gpio38) on pinctrl-bcm2711
[    0.165811] pinctrl core: registered pin 39 (gpio39) on pinctrl-bcm2711
[    0.165818] pinctrl core: registered pin 40 (gpio40) on pinctrl-bcm2711
[    0.165824] pinctrl core: registered pin 41 (gpio41) on pinctrl-bcm2711
[    0.165830] pinctrl core: registered pin 42 (gpio42) on pinctrl-bcm2711
[    0.165837] pinctrl core: registered pin 43 (gpio43) on pinctrl-bcm2711
[    0.165843] pinctrl core: registered pin 44 (gpio44) on pinctrl-bcm2711
[    0.165850] pinctrl core: registered pin 45 (gpio45) on pinctrl-bcm2711
[    0.165856] pinctrl core: registered pin 46 (gpio46) on pinctrl-bcm2711
[    0.165862] pinctrl core: registered pin 47 (gpio47) on pinctrl-bcm2711
[    0.165869] pinctrl core: registered pin 48 (gpio48) on pinctrl-bcm2711
[    0.165875] pinctrl core: registered pin 49 (gpio49) on pinctrl-bcm2711
[    0.165881] pinctrl core: registered pin 50 (gpio50) on pinctrl-bcm2711
[    0.165888] pinctrl core: registered pin 51 (gpio51) on pinctrl-bcm2711
[    0.165894] pinctrl core: registered pin 52 (gpio52) on pinctrl-bcm2711
[    0.165901] pinctrl core: registered pin 53 (gpio53) on pinctrl-bcm2711
[    0.165907] pinctrl core: registered pin 54 (gpio54) on pinctrl-bcm2711
[    0.165913] pinctrl core: registered pin 55 (gpio55) on pinctrl-bcm2711
[    0.165920] pinctrl core: registered pin 56 (gpio56) on pinctrl-bcm2711
[    0.165926] pinctrl core: registered pin 57 (gpio57) on pinctrl-bcm2711
[    0.165938] pinctrl-bcm2835 fe200000.gpio: no hogs found
[    0.166180] gpio gpiochip0: (pinctrl-bcm2711): created GPIO range 0->57 ==> fe200000.gpio PIN 0->57
[    0.166345] pinctrl-bcm2835 fe200000.gpio: get 00000000 (0 => gpio_in)
[    0.166357] pinctrl-bcm2835 fe200000.gpio: get 00000000 (1 => gpio_in)
[    0.166367] pinctrl-bcm2835 fe200000.gpio: get 00000000 (2 => gpio_in)
[    0.166376] pinctrl-bcm2835 fe200000.gpio: get 00000000 (3 => gpio_in)
[    0.166385] pinctrl-bcm2835 fe200000.gpio: get 00000000 (4 => gpio_in)
[    0.166394] pinctrl-bcm2835 fe200000.gpio: get 00000000 (5 => gpio_in)
[    0.166402] pinctrl-bcm2835 fe200000.gpio: get 00000000 (6 => gpio_in)
[    0.166411] pinctrl-bcm2835 fe200000.gpio: get 00000000 (7 => gpio_in)
[    0.166420] pinctrl-bcm2835 fe200000.gpio: get 00000000 (8 => gpio_in)
[    0.166428] pinctrl-bcm2835 fe200000.gpio: get 00000000 (9 => gpio_in)
[    0.166437] pinctrl-bcm2835 fe200000.gpio: get 00024000 (10 => gpio_in)
[    0.166446] pinctrl-bcm2835 fe200000.gpio: get 00024000 (11 => gpio_in)
[    0.166455] pinctrl-bcm2835 fe200000.gpio: get 00024000 (12 => gpio_in)
[    0.166464] pinctrl-bcm2835 fe200000.gpio: get 00024000 (13 => gpio_in)
[    0.166473] pinctrl-bcm2835 fe200000.gpio: get 00024000 (14 => alt0)
[    0.166482] pinctrl-bcm2835 fe200000.gpio: get 00024000 (15 => alt0)
[    0.166490] pinctrl-bcm2835 fe200000.gpio: get 00024000 (16 => gpio_in)
[    0.166499] pinctrl-bcm2835 fe200000.gpio: get 00024000 (17 => gpio_in)
[    0.166508] pinctrl-bcm2835 fe200000.gpio: get 00024000 (18 => gpio_in)
[    0.166516] pinctrl-bcm2835 fe200000.gpio: get 00024000 (19 => gpio_in)
[    0.166525] pinctrl-bcm2835 fe200000.gpio: get 12000000 (20 => gpio_in)
[    0.166534] pinctrl-bcm2835 fe200000.gpio: get 12000000 (21 => gpio_in)
[    0.166543] pinctrl-bcm2835 fe200000.gpio: get 12000000 (22 => gpio_in)
[    0.166552] pinctrl-bcm2835 fe200000.gpio: get 12000000 (23 => gpio_in)
[    0.166561] pinctrl-bcm2835 fe200000.gpio: get 12000000 (24 => gpio_in)
[    0.166569] pinctrl-bcm2835 fe200000.gpio: get 12000000 (25 => gpio_in)
[    0.166578] pinctrl-bcm2835 fe200000.gpio: get 12000000 (26 => gpio_in)
[    0.166587] pinctrl-bcm2835 fe200000.gpio: get 12000000 (27 => gpio_in)
[    0.166595] pinctrl-bcm2835 fe200000.gpio: get 12000000 (28 => alt5)
[    0.166604] pinctrl-bcm2835 fe200000.gpio: get 12000000 (29 => alt5)
[    0.166613] pinctrl-bcm2835 fe200000.gpio: get 00000000 (30 => gpio_in)
[    0.166621] pinctrl-bcm2835 fe200000.gpio: get 00000000 (31 => gpio_in)
[    0.166630] pinctrl-bcm2835 fe200000.gpio: get 00000000 (32 => gpio_in)
[    0.166639] pinctrl-bcm2835 fe200000.gpio: get 00000000 (33 => gpio_in)
[    0.166647] pinctrl-bcm2835 fe200000.gpio: get 00000000 (34 => gpio_in)
[    0.166656] pinctrl-bcm2835 fe200000.gpio: get 00000000 (35 => gpio_in)
[    0.166664] pinctrl-bcm2835 fe200000.gpio: get 00000000 (36 => gpio_in)
[    0.166673] pinctrl-bcm2835 fe200000.gpio: get 00000000 (37 => gpio_in)
[    0.166681] pinctrl-bcm2835 fe200000.gpio: get 00000000 (38 => gpio_in)
[    0.166690] pinctrl-bcm2835 fe200000.gpio: get 00000000 (39 => gpio_in)
[    0.166698] pinctrl-bcm2835 fe200000.gpio: get 00000064 (40 => alt0)
[    0.166707] pinctrl-bcm2835 fe200000.gpio: get 00000064 (41 => alt0)
[    0.166716] pinctrl-bcm2835 fe200000.gpio: get 00000064 (42 => gpio_out)
[    0.166725] pinctrl-bcm2835 fe200000.gpio: get 00000064 (43 => gpio_in)
[    0.166734] pinctrl-bcm2835 fe200000.gpio: get 00000064 (44 => gpio_in)
[    0.166743] pinctrl-bcm2835 fe200000.gpio: get 00000064 (45 => gpio_in)
[    0.166751] pinctrl-bcm2835 fe200000.gpio: get 00000064 (46 => gpio_in)
[    0.166760] pinctrl-bcm2835 fe200000.gpio: get 00000064 (47 => gpio_in)
[    0.166768] pinctrl-bcm2835 fe200000.gpio: get 00000064 (48 => gpio_in)
[    0.166777] pinctrl-bcm2835 fe200000.gpio: get 00000064 (49 => gpio_in)
[    0.166785] pinctrl-bcm2835 fe200000.gpio: get 00000000 (50 => gpio_in)
[    0.166794] pinctrl-bcm2835 fe200000.gpio: get 00000000 (51 => gpio_in)
[    0.166802] pinctrl-bcm2835 fe200000.gpio: get 00000000 (52 => gpio_in)
[    0.166811] pinctrl-bcm2835 fe200000.gpio: get 00000000 (53 => gpio_in)
[    0.166819] pinctrl-bcm2835 fe200000.gpio: get 00000000 (54 => gpio_in)
[    0.166828] pinctrl-bcm2835 fe200000.gpio: get 00000000 (55 => gpio_in)
[    0.166836] pinctrl-bcm2835 fe200000.gpio: get 00000000 (56 => gpio_in)
[    0.166845] pinctrl-bcm2835 fe200000.gpio: get 00000000 (57 => gpio_in)
[    0.167097] gpio gpiochip0: (pinctrl-bcm2711): added GPIO chardev (254:0)
[    0.167176] gpio gpiochip0: registered GPIOs 0 to 57 on pinctrl-bcm2711
[    0.167966] gpiochip_find_base: found new base at 504
[    0.169190] gpio gpiochip1: (raspberrypi-exp-gpio): added GPIO chardev (254:1)
[    0.169249] gpio gpiochip1: registered GPIOs 504 to 511 on raspberrypi-exp-gpio
[    0.169668] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    0.169704] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    0.169752] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    0.169796] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[    0.170299] brcm-pcie fd500000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[    0.170549] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    0.170571] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.170591] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    0.170644] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    0.170729] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.174218] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.174343] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[    0.174469] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[    0.174536] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[    0.292449] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    0.292558] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    0.292656] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.292931] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.293335] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.293378] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    0.293401] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    0.293473] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.293491] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    0.293664] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    0.293747] pcie_pme 0000:00:00.0:pcie001: no of_node; not parsing pinctrl DT
[    0.293810] pcieport 0000:00:00.0: PME: Signaling with IRQ 26
[    0.293905] aer 0000:00:00.0:pcie002: no of_node; not parsing pinctrl DT
[    0.294056] pcieport 0000:00:00.0: AER: enabled with IRQ 26
[    0.294683] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
[    0.294706] bcm2708_fb: probe of soc:fb failed with error -2
[    0.301101] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.301404] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.301955] iproc-rng200 fe104000.rng: hwrng registered
[    0.302077] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.310328] brd: module loaded
[    0.314042] loop: module loaded
[    0.314423] bcm2835-power bcm2835-power: no of_node; not parsing pinctrl DT
[    0.314755] Loading iSCSI transport class v2.0-870.
[    0.316193] mdio_bus fixed-0: GPIO lookup for consumer reset
[    0.316207] mdio_bus fixed-0: using lookup tables for GPIO lookup
[    0.316216] mdio_bus fixed-0: No GPIO consumer reset found
[    0.316705] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    0.317276] mdio_bus unimac-mdio--19: GPIO lookup for consumer reset
[    0.317286] mdio_bus unimac-mdio--19: using device tree for GPIO lookup
[    0.317303] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/scb/ethernet@7d580000/mdio@e14[0]'
[    0.317332] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/scb/ethernet@7d580000/mdio@e14[0]'
[    0.317358] mdio_bus unimac-mdio--19: using lookup tables for GPIO lookup
[    0.317365] mdio_bus unimac-mdio--19: No GPIO consumer reset found
[    0.370838] mdio_bus unimac-mdio--19:01: GPIO lookup for consumer reset
[    0.370850] mdio_bus unimac-mdio--19:01: using device tree for GPIO lookup
[    0.370864] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/scb/ethernet@7d580000/mdio@e14/ethernet-phy@1[0]'
[    0.370897] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/scb/ethernet@7d580000/mdio@e14/ethernet-phy@1[0]'
[    0.370925] mdio_bus unimac-mdio--19:01: using lookup tables for GPIO lookup
[    0.370932] mdio_bus unimac-mdio--19:01: No GPIO consumer reset found
[    0.470429] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    0.518625] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.518664] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.520306] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000e40000000890
[    0.521064] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.521090] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    0.521115] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    0.521332] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.521359] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.521378] usb usb1: Product: xHCI Host Controller
[    0.521393] usb usb1: Manufacturer: Linux 6.1.71 xhci-hcd
[    0.521408] usb usb1: SerialNumber: 0000:01:00.0
[    0.521864] hub 1-0:1.0: USB hub found
[    0.521915] hub 1-0:1.0: 1 port detected
[    0.522382] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    0.522410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.522429] usb usb2: Product: xHCI Host Controller
[    0.522444] usb usb2: Manufacturer: Linux 6.1.71 xhci-hcd
[    0.522458] usb usb2: SerialNumber: 0000:01:00.0
[    0.522839] hub 2-0:1.0: USB hub found
[    0.522891] hub 2-0:1.0: 4 ports detected
[    0.523730] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.523830] dwc_otg: FIQ enabled
[    0.523836] dwc_otg: NAK holdoff enabled
[    0.523841] dwc_otg: FIQ split-transaction FSM enabled
[    0.523849] Module dwc_common_port init
[    0.524195] usbcore: registered new interface driver uas
[    0.524281] usbcore: registered new interface driver usb-storage
[    0.524435] mousedev: PS/2 mouse device common for all mice
[    0.525045] bcm2835-wdt bcm2835-wdt: no of_node; not parsing pinctrl DT
[    0.525259] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.525399] raspberrypi-cpufreq raspberrypi-cpufreq: no of_node; not parsing pinctrl DT
[    0.526546] cpufreq-dt cpufreq-dt: no of_node; not parsing pinctrl DT
[    0.527122] sdhci: Secure Digital Host Controller Interface driver
[    0.527139] sdhci: Copyright(c) Pierre Ossman
[    0.527216] pinctrl core: add 12 pinctrl maps
[    0.527239] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34
[    0.527269] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35
[    0.527286] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36
[    0.527301] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37
[    0.527316] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38
[    0.527331] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39
[    0.527345] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr
[    0.527357] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in)
[    0.527368] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3)
[    0.527378] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr
[    0.527388] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in)
[    0.527398] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3)
[    0.527408] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr
[    0.527417] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in)
[    0.527426] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3)
[    0.527436] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr
[    0.527445] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in)
[    0.527454] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3)
[    0.527462] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr
[    0.527471] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in)
[    0.527480] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3)
[    0.527489] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr
[    0.527498] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in)
[    0.527506] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3)
[    0.527792] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    0.528196] pinctrl-bcm2835 fe200000.gpio: get 3ffff000 (34 => alt3)
[    0.528210] pinctrl-bcm2835 fe200000.gpio: read 3ffff000 (34 => alt3)
[    0.528220] pinctrl-bcm2835 fe200000.gpio: write 3fff8000 (34 <= gpio_in)
[    0.528232] pinctrl-bcm2835 fe200000.gpio: get 3fff8000 (35 => alt3)
[    0.528241] pinctrl-bcm2835 fe200000.gpio: read 3fff8000 (35 => alt3)
[    0.528249] pinctrl-bcm2835 fe200000.gpio: write 3ffc0000 (35 <= gpio_in)
[    0.528259] pinctrl-bcm2835 fe200000.gpio: get 3ffc0000 (36 => alt3)
[    0.528268] pinctrl-bcm2835 fe200000.gpio: read 3ffc0000 (36 => alt3)
[    0.528276] pinctrl-bcm2835 fe200000.gpio: write 3fe00000 (36 <= gpio_in)
[    0.528285] pinctrl-bcm2835 fe200000.gpio: get 3fe00000 (37 => alt3)
[    0.528294] pinctrl-bcm2835 fe200000.gpio: read 3fe00000 (37 => alt3)
[    0.528302] pinctrl-bcm2835 fe200000.gpio: write 3f000000 (37 <= gpio_in)
[    0.528312] pinctrl-bcm2835 fe200000.gpio: get 3f000000 (38 => alt3)
[    0.528321] pinctrl-bcm2835 fe200000.gpio: read 3f000000 (38 => alt3)
[    0.528329] pinctrl-bcm2835 fe200000.gpio: write 38000000 (38 <= gpio_in)
[    0.528338] pinctrl-bcm2835 fe200000.gpio: get 38000000 (39 => alt3)
[    0.528347] pinctrl-bcm2835 fe200000.gpio: read 38000000 (39 => alt3)
[    0.528355] pinctrl-bcm2835 fe200000.gpio: write 00000000 (39 <= gpio_in)
[    0.528513] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.528665] pinctrl core: add 12 pinctrl maps
[    0.528688] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34
[    0.528716] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35
[    0.528733] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36
[    0.528749] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37
[    0.528764] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38
[    0.528779] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39
[    0.528792] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr
[    0.528802] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in)
[    0.528796] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led-act[0]' - status (0)
[    0.528813] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3)
[    0.528824] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr
[    0.528832] pinctrl-bcm2835 fe200000.gpio: request pin 42 (gpio42) for pinctrl-bcm2711:42
[    0.528834] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in)
[    0.528843] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3)
[    0.528847] pinctrl-bcm2835 fe200000.gpio: get 00000064 (42 => gpio_out)
[    0.528853] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr
[    0.528862] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in)
[    0.528864] gpio gpiochip0: Persistence not supported for GPIO 42
[    0.528872] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3)
[    0.528873] gpio-42 (?): no flags found for gpios
[    0.528883] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr
[    0.528888] sdhci-iproc fe340000.mmc: GPIO lookup for consumer cd
[    0.528891] pinctrl-bcm2835 fe200000.gpio: read 00000064 (42 => gpio_out)
[    0.528900] sdhci-iproc fe340000.mmc: using device tree for GPIO lookup
[    0.528902] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in)
[    0.528911] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3)
[    0.528919] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr
[    0.528916] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/emmc2bus/mmc@7e340000[0]'
[    0.528928] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in)
[    0.528938] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3)
[    0.528946] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr
[    0.528943] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/emmc2bus/mmc@7e340000[0]'
[    0.528955] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in)
[    0.528964] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3)
[    0.528966] sdhci-iproc fe340000.mmc: using lookup tables for GPIO lookup
[    0.528973] sdhci-iproc fe340000.mmc: No GPIO consumer cd found
[    0.528986] sdhci-iproc fe340000.mmc: GPIO lookup for consumer wp
[    0.528983] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led-pwr[0]' - status (0)
[    0.528993] sdhci-iproc fe340000.mmc: using device tree for GPIO lookup
[    0.529005] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/emmc2bus/mmc@7e340000[0]'
[    0.529033] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/emmc2bus/mmc@7e340000[0]'
[    0.529058] sdhci-iproc fe340000.mmc: using lookup tables for GPIO lookup
[    0.529066] sdhci-iproc fe340000.mmc: No GPIO consumer wp found
[    0.529187] sdhci-iproc fe300000.mmcnr: GPIO lookup for consumer wp
[    0.529198] sdhci-iproc fe300000.mmcnr: using device tree for GPIO lookup
[    0.529212] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmcnr@7e300000[0]'
[    0.529239] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmcnr@7e300000[0]'
[    0.529260] sdhci-iproc fe300000.mmcnr: using lookup tables for GPIO lookup
[    0.529268] sdhci-iproc fe300000.mmcnr: No GPIO consumer wp found
[    0.529564] pinctrl-bcm2835 fe200000.gpio: get 3ffff000 (34 => alt3)
[    0.529579] pinctrl-bcm2835 fe200000.gpio: read 3ffff000 (34 => alt3)
[    0.529588] pinctrl-bcm2835 fe200000.gpio: write 3fff8000 (34 <= gpio_in)
[    0.529600] pinctrl-bcm2835 fe200000.gpio: get 3fff8000 (35 => alt3)
[    0.529609] pinctrl-bcm2835 fe200000.gpio: read 3fff8000 (35 => alt3)
[    0.529618] pinctrl-bcm2835 fe200000.gpio: write 3ffc0000 (35 <= gpio_in)
[    0.529627] pinctrl-bcm2835 fe200000.gpio: get 3ffc0000 (36 => alt3)
[    0.529636] pinctrl-bcm2835 fe200000.gpio: read 3ffc0000 (36 => alt3)
[    0.529644] pinctrl-bcm2835 fe200000.gpio: write 3fe00000 (36 <= gpio_in)
[    0.529654] pinctrl-bcm2835 fe200000.gpio: get 3fe00000 (37 => alt3)
[    0.529663] pinctrl-bcm2835 fe200000.gpio: read 3fe00000 (37 => alt3)
[    0.529671] pinctrl-bcm2835 fe200000.gpio: write 3f000000 (37 <= gpio_in)
[    0.529680] pinctrl-bcm2835 fe200000.gpio: get 3f000000 (38 => alt3)
[    0.529689] pinctrl-bcm2835 fe200000.gpio: read 3f000000 (38 => alt3)
[    0.529697] pinctrl-bcm2835 fe200000.gpio: write 38000000 (38 <= gpio_in)
[    0.529706] pinctrl-bcm2835 fe200000.gpio: get 38000000 (39 => alt3)
[    0.529715] pinctrl-bcm2835 fe200000.gpio: read 38000000 (39 => alt3)
[    0.529723] pinctrl-bcm2835 fe200000.gpio: write 00000000 (39 <= gpio_in)
[    0.532838] gpio gpiochip1: Persistence not supported for GPIO 2
[    0.532842] gpio-506 (?): no flags found for gpios
[    0.534314] pinctrl core: add 4 pinctrl maps
[    0.534322] pinctrl-bcm2835 fe200000.gpio: found group selector 40 for gpio40
[    0.534331] pinctrl-bcm2835 fe200000.gpio: found group selector 41 for gpio41
[    0.534336] pinctrl-bcm2835 fe200000.gpio: request pin 40 (gpio40) for fe00b840.mailbox
[    0.534340] pinctrl-bcm2835 fe200000.gpio: read 00000064 (40 => alt0)
[    0.534344] pinctrl-bcm2835 fe200000.gpio: request pin 41 (gpio41) for fe00b840.mailbox
[    0.534348] pinctrl-bcm2835 fe200000.gpio: read 00000064 (41 => alt0)
[    0.537234] NET: Registered PF_INET6 protocol family
[    0.537752] Segment Routing with IPv6
[    0.537770] In-situ OAM (IOAM) with IPv6
[    0.537815] NET: Registered PF_PACKET protocol family
[    0.537834] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.537890] 8021q: 802.1Q VLAN Support v1.8
[    0.538215] Key type .fscrypt registered
[    0.538221] Key type fscrypt-provisioning registered
[    0.542597] uart-pl011 fe201000.serial: there is not valid maps for state default
[    0.542749] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    0.542778] uart-pl011 fe201000.serial: GPIO lookup for consumer rs485-term
[    0.542781] uart-pl011 fe201000.serial: using device tree for GPIO lookup
[    0.542791] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@7e201000[0]'
[    0.542801] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@7e201000[0]'
[    0.542811] uart-pl011 fe201000.serial: using lookup tables for GPIO lookup
[    0.542815] uart-pl011 fe201000.serial: No GPIO consumer rs485-term found
[    0.542845] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 32, base_baud = 0) is a PL011 rev2
[    0.820363] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    0.821960] printk: console [ttyAMA0] enabled
[    1.012943] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    1.019925] reg-fixed-voltage cam1_regulator: GPIO lookup for consumer (null)
[    1.027522] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.035517] reg-fixed-voltage cam1_regulator: using device tree for GPIO lookup
[    1.035520] usb 1-1: Product: USB2.0 Hub
[    1.041520] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/cam1_regulator[0]'
[    1.041533] of_get_named_gpiod_flags: parsed 'gpio' property of node '/cam1_regulator[0]' - status (0)
[    1.045643] gpio gpiochip1: Persistence not supported for GPIO 5
[    1.049667] usb 1-1: no of_node; not parsing pinctrl DT
[    1.064650] reg-fixed-voltage sd_vcc_reg: GPIO lookup for consumer (null)
[    1.745309] reg-fixed-voltage sd_vcc_reg: using device tree for GPIO lookup
[    1.745319] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/sd_vcc_reg[0]'
[    1.745335] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sd_vcc_reg[0]' - status (0)
[    1.745423] gpio gpiochip1: Persistence not supported for GPIO 6
[    1.746706] hub 1-1:1.0: no of_node; not parsing pinctrl DT
[    1.746728] hub 1-1:1.0: USB hub found
[    1.750687] hub 1-1:1.0: 4 ports detected
[    1.754859] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer (null)
[    1.754864] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup
[    1.754873] of_get_named_gpiod_flags: parsed 'gpios' property of node '/sd_io_1v8_reg[0]' - status (0)
[    1.754907] gpio gpiochip1: Persistence not supported for GPIO 4
[    1.756150] gpio-regulator sd_io_1v8_reg: GPIO lookup for consumer enable
[    1.756154] gpio-regulator sd_io_1v8_reg: using device tree for GPIO lookup
[    1.756159] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/sd_io_1v8_reg[0]'
[    1.756167] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/sd_io_1v8_reg[0]'
[    1.756174] gpio-regulator sd_io_1v8_reg: using lookup tables for GPIO lookup
[    1.756178] gpio-regulator sd_io_1v8_reg: No GPIO consumer enable found
[    1.756568] bcm2835-power bcm2835-power: no of_node; not parsing pinctrl DT
[    1.756627] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.763935] pinctrl core: add 12 pinctrl maps
[    1.763946] pinctrl-bcm2835 fe200000.gpio: found group selector 34 for gpio34
[    1.763956] pinctrl-bcm2835 fe200000.gpio: found group selector 35 for gpio35
[    1.763962] pinctrl-bcm2835 fe200000.gpio: found group selector 36 for gpio36
[    1.763967] pinctrl-bcm2835 fe200000.gpio: found group selector 37 for gpio37
[    1.763973] pinctrl-bcm2835 fe200000.gpio: found group selector 38 for gpio38
[    1.763978] pinctrl-bcm2835 fe200000.gpio: found group selector 39 for gpio39
[    1.763983] pinctrl-bcm2835 fe200000.gpio: request pin 34 (gpio34) for fe300000.mmcnr
[    1.763988] pinctrl-bcm2835 fe200000.gpio: read 00000000 (34 => gpio_in)
[    1.763992] pinctrl-bcm2835 fe200000.gpio: write 00007000 (34 <= alt3)
[    1.763996] pinctrl-bcm2835 fe200000.gpio: request pin 35 (gpio35) for fe300000.mmcnr
[    1.764000] pinctrl-bcm2835 fe200000.gpio: read 00007000 (35 => gpio_in)
[    1.764003] pinctrl-bcm2835 fe200000.gpio: write 0003f000 (35 <= alt3)
[    1.764007] pinctrl-bcm2835 fe200000.gpio: request pin 36 (gpio36) for fe300000.mmcnr
[    1.764010] pinctrl-bcm2835 fe200000.gpio: read 0003f000 (36 => gpio_in)
[    1.764013] pinctrl-bcm2835 fe200000.gpio: write 001ff000 (36 <= alt3)
[    1.764017] pinctrl-bcm2835 fe200000.gpio: request pin 37 (gpio37) for fe300000.mmcnr
[    1.764020] pinctrl-bcm2835 fe200000.gpio: read 001ff000 (37 => gpio_in)
[    1.764023] pinctrl-bcm2835 fe200000.gpio: write 00fff000 (37 <= alt3)
[    1.764027] pinctrl-bcm2835 fe200000.gpio: request pin 38 (gpio38) for fe300000.mmcnr
[    1.764030] pinctrl-bcm2835 fe200000.gpio: read 00fff000 (38 => gpio_in)
[    1.764034] pinctrl-bcm2835 fe200000.gpio: write 07fff000 (38 <= alt3)
[    1.764037] pinctrl-bcm2835 fe200000.gpio: request pin 39 (gpio39) for fe300000.mmcnr
[    1.764041] pinctrl-bcm2835 fe200000.gpio: read 07fff000 (39 => gpio_in)
[    1.764044] pinctrl-bcm2835 fe200000.gpio: write 3ffff000 (39 <= alt3)
[    1.764155] mmc-bcm2835 fe300000.mmcnr: GPIO lookup for consumer wp
[    1.764160] mmc-bcm2835 fe300000.mmcnr: using device tree for GPIO lookup
[    1.764165] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmcnr@7e300000[0]'
[    1.764174] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmcnr@7e300000[0]'
[    1.764182] mmc-bcm2835 fe300000.mmcnr: using lookup tables for GPIO lookup
[    1.764185] mmc-bcm2835 fe300000.mmcnr: No GPIO consumer wp found
[    1.764204] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.770204] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.801420] sdhci-iproc fe340000.mmc: GPIO lookup for consumer cd
[    1.801429] sdhci-iproc fe340000.mmc: using device tree for GPIO lookup
[    1.801436] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/emmc2bus/mmc@7e340000[0]'
[    1.801448] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/emmc2bus/mmc@7e340000[0]'
[    1.801458] sdhci-iproc fe340000.mmc: using lookup tables for GPIO lookup
[    1.801463] sdhci-iproc fe340000.mmc: No GPIO consumer cd found
[    1.801467] sdhci-iproc fe340000.mmc: GPIO lookup for consumer wp
[    1.801471] sdhci-iproc fe340000.mmc: using device tree for GPIO lookup
[    1.801476] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/emmc2bus/mmc@7e340000[0]'
[    1.801486] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/emmc2bus/mmc@7e340000[0]'
[    1.801494] sdhci-iproc fe340000.mmc: using lookup tables for GPIO lookup
[    1.801498] sdhci-iproc fe340000.mmc: No GPIO consumer wp found
[    1.802049] of_cfs_init
[    1.804584] of_cfs_init: OK
[    1.844613] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[    1.851918] Waiting for root device /dev/mmcblk0p2...
[    1.889768] mmc1: new high speed SDIO card at address 0001
[    1.895364] mmcblk mmc1:0001: no of_node; not parsing pinctrl DT
[    1.899578] mmc0: new high speed SDXC card at address 0001
[    1.905167] mmcblk mmc0:0001: no of_node; not parsing pinctrl DT
[    1.905727] mmcblk0: mmc0:0001 asdfg 125 GiB 
[    1.910921]  mmcblk0: p1 p2
[    1.913903] mmcblk0: mmc0:0001 asdfg 125 GiB
[    1.949328] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Quota mode: disabled.
[    1.957656] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.964102] devtmpfs: mounted
[    1.967359] Freeing unused kernel memory: 512K
[    1.990469] Run /sbin/init as init process
[    1.994570]   with arguments:
[    1.994574]     /sbin/init
[    1.994577]   with environment:
[    1.994581]     HOME=/
[    1.994585]     TERM=linux
[    2.080399] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
[    2.089492] init: Console is alive
[    2.093135] init: - watchdog -
[    2.215094] usb 1-1.2: config 1 interface 1 altsetting 0 endpoint 0x1 has invalid maxpacket 512, setting to 64
[    2.225165] usb 1-1.2: config 1 interface 1 altsetting 0 endpoint 0x81 has invalid maxpacket 512, setting to 64
[    2.239338] usb 1-1.2: New USB device found, idVendor=0e8d, idProduct=2000, bcdDevice= 1.00
[    2.247713] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.255027] usb 1-1.2: Product: MT65xx Preloader
[    2.259638] usb 1-1.2: Manufacturer: MediaTek
[    2.264131] usb 1-1.2: no of_node; not parsing pinctrl DT
[    2.764705] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.841524] libata version 3.00 loaded.
[    2.845036] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.859759] init: - preinit -
[    3.016653] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[    3.026225] bcmgenet fd580000.ethernet eth0: Link is Down
[    3.048102] uart-pl011 fe201000.serial: no DMA platform data
[    3.262212] usb 1-1.2: USB disconnect, device number 3
[    5.092398] mount_root: mounting /dev/root with options 
[    5.100114] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: disabled.
[    5.106502] mount_root: loading kmods from internal overlay
[    5.135389] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    5.144194] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    5.269393] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[    5.276446] block: unable to load configuration (fstab: Entry not found)
[    5.283248] block: attempting to load /tmp/overlay/etc/config/fstab
[    5.289565] block: unable to load configuration (fstab: Entry not found)
[    5.296331] block: attempting to load /etc/config/fstab
[    5.361566] block: check_filesystem: /usr/sbin/e2fsck returned 8
[    5.377425] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: disabled.
[    5.390038] mount_root: switched to extroot
[    5.404311] insmod: module is already loaded - fat
[    5.410814] insmod: module is already loaded - vfat
[    5.444218] urandom-seed: Seeding with /etc/urandom.seed
[    5.529291] procd: - early -
[    5.532383] procd: - watchdog -
[    6.070249] procd: - watchdog -
[    6.073589] procd: - ubus -
[    6.130896] procd: - init -
[    8.644755] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: disabled.
[    8.705106] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.726109] MACsec IEEE 802.1AE
[    8.731122] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[    8.731122]   originally by Donald Becker <becker@scyld.com>
[    8.731122]   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[    8.750495] zram: Added device: zram0
[    8.757244] NET: Registered PF_ATMPVC protocol family
[    8.762466] NET: Registered PF_ATMSVC protocol family
[    8.770618] NET: Registered PF_KEY protocol family
[    8.776247] Initializing XFRM netlink socket
[    8.782274] Modular ISDN core version 1.1.29
[    8.786673] NET: Registered PF_ISDN protocol family
[    8.792060] mISDN: Layer-1-over-IP driver Rev. 2.00
[    8.797382] 0 virtual devices registered
[    8.802177] DSP module 2.0
[    8.804890] mISDN_dsp: DSP clocks every 80 samples. This equals 1 jiffies.
[    8.815071] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
[    8.824422] tun: Universal TUN/TAP device driver, 1.6
[    8.831702] mISDN: HFC-multi driver 2.03
[    8.856811] sctp: Hash tables configured (bind 256/256)
[    8.863896] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    8.872208] nat46: module (version 4c5beee236841724219598fabb1edc93d4f08ce5) loaded.
[    8.882536] e1000: Intel(R) PRO/1000 Network Driver
[    8.887431] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    8.894611] VMware vmxnet3 virtual NIC driver - version 1.7.0.0-k-NAPI
[    8.902272] gre: GRE over IPv4 demultiplexor driver
[    8.907935] ip_gre: GRE over IPv4 tunneling driver
[    8.914983] ip6_gre: GRE over IPv6 tunneling driver
[    8.933835] cryptodev: driver 1.13 loaded.
[    8.953398] ppdev: user-space parallel port driver
[    8.960186] i2c_dev: i2c /dev entries driver
[    8.970412] hid: raw HID events driver (C) Jiri Kosina
[    8.977490] GACT probability on
[    8.981331] Mirror/redirect action on
[    8.987767] u32 classifier
[    8.990498]     input device check on
[    8.994153]     Actions configured
[    9.002190] Simple TC action Loaded
[    9.012414] 8139too: 8139too Fast Ethernet driver 0.9.28
[    9.072902] usbcore: registered new interface driver cdc_acm
[    9.078573] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    9.087721] usbcore: registered new interface driver cdc_wdm
[    9.093935] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f
[    9.101214] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8
[    9.110027] e100: Intel(R) PRO/100 Network Driver
[    9.114780] e100: Copyright(c) 1999-2006 Intel Corporation
[    9.122126] e1000e: Intel(R) PRO/1000 Network Driver
[    9.127105] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    9.136843] hso: drivers/net/usb/hso.c: Option Wireless
[    9.142192] usbcore: registered new interface driver hso
[    9.148931] usbcore: registered new interface driver ipheth
[    9.156296] usbcore: registered new interface driver kaweth
[    9.162867] usbcore: registered new interface driver lan78xx
[    9.196097] pegasus: Pegasus/Pegasus II USB Ethernet driver
[    9.201771] usbcore: registered new interface driver pegasus
[    9.209825] usbcore: registered new device driver r8152-cfgselector
[    9.216242] usbcore: registered new interface driver r8152
[    9.223729] usbcore: registered new interface driver rtl8150
[    9.231246] sis900.c: v1.08.10 Apr. 2 2006
[    9.237003] sky2: driver version 1.30
[    9.242888] Solos PCI Driver Version 1.04
[    9.248756] tulip: tulip: unknown CPU architecture, using default csr0
[    9.256508] usbcore: registered new interface driver usbhid
[    9.262107] usbhid: USB HID core driver
[    9.268411] usbcore: registered new interface driver usbserial_generic
[    9.275026] usbserial: USB Serial support registered for generic
[    9.283015] usbcore: registered new interface driver visor
[    9.288559] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[    9.296318] usbserial: USB Serial support registered for Sony Clie 5.0
[    9.302919] usbserial: USB Serial support registered for Sony Clie 3.5
[    9.461572] xt_ndpi v1.2 ndpi 4.9.0 IPv6=YES debug_message=no
[    9.461572]  BT: hash_size 0k, hash_expiation 0 sec, log_size 128kb
[    9.461572]  sizeof hash_ip4p_node=44 flow_struct=968 packet_struct=1336
[    9.461572]    flow_tcp_struct=112 flow_udp_struct=104 int_one_line_struct=16
[    9.461572]  ndpi_ip_addr_t=16 ndpi_protocol=6 nf_ct_ext_ndpi=176
[    9.461572]  flow_info=112 spinlock_t=4  NF_LABEL_ID 5
[    9.498620] xt_ndpi: MAX_PROTOCOLS 512 LAST_PROTOCOL 373
[    9.503925] xt_ndpi: flow accounting OFF
[    9.510065] xt_time: kernel timezone is -0000
[    9.514979] usbcore: registered new interface driver ark3116
[    9.520673] usbserial: USB Serial support registered for ark3116
[    9.527606] usbcore: registered new interface driver asix
[    9.533515] usbcore: registered new interface driver ax88179_178a
[    9.539919] usbcore: registered new interface driver belkin_sa
[    9.545773] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    9.555310] usbcore: registered new interface driver cdc_eem
[    9.561532] usbcore: registered new interface driver cdc_ether
[    9.568150] usbcore: registered new interface driver cdc_ncm
[    9.574121] usbcore: registered new interface driver cdc_subset
[    9.593788] usbcore: registered new interface driver ch341
[    9.599304] usbserial: USB Serial support registered for ch341-uart
[    9.606804] usbcore: registered new interface driver cp210x
[    9.612427] usbserial: USB Serial support registered for cp210x
[    9.618852] usbcore: registered new interface driver cypress_m8
[    9.624798] usbserial: USB Serial support registered for DeLorme Earthmate USB
[    9.632041] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[    9.639354] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[    9.647124] usbcore: registered new interface driver dm9601
[    9.653252] usbcore: registered new interface driver ftdi_sio
[    9.659019] usbserial: USB Serial support registered for FTDI USB Serial Device
[    9.666727] usbcore: registered new interface driver garmin_gps
[    9.672665] usbserial: USB Serial support registered for Garmin GPS usb/tty
[    9.679982] usbcore: registered new interface driver huawei_cdc_ncm
[    9.686931] usbcore: registered new interface driver kalmia
[    9.692937] usbcore: registered new interface driver keyspan
[    9.698614] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    9.706462] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    9.713778] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    9.721096] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    9.764047] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    9.771831] usbcore: registered new interface driver mct_u232
[    9.777593] usbserial: USB Serial support registered for MCT U232
[    9.784652] usbcore: registered new interface driver mos7720
[    9.790331] usbserial: USB Serial support registered for Moschip 2 port adapter
[    9.798450] usbcore: registered new interface driver mt7601u
[    9.815221] usbcore: registered new interface driver oti6858
[    9.820921] usbserial: USB Serial support registered for oti6858
[    9.827328] usbcore: registered new interface driver pl2303
[    9.832922] usbserial: USB Serial support registered for pl2303
[    9.839825] PPP generic driver version 2.4.2
[    9.844762] NET: Registered PF_PPPOX protocol family
[    9.850391] usbcore: registered new interface driver qmi_wwan
[    9.856836] usbcore: registered new interface driver rndis_host
[    9.866914] usbcore: registered new interface driver rtl8xxxu
[    9.875801] usbcore: registered new interface driver sierra
[    9.881414] usbserial: USB Serial support registered for Sierra USB modem
[    9.888748] usbcore: registered new interface driver sierra_net
[    9.895329] usbcore: registered new interface driver smsc95xx
[    9.901605] usbcore: registered new interface driver sr9700
[    9.907622] usbcore: registered new interface driver ti_usb_3410_5052
[    9.914090] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[    9.921759] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[    9.929767] usbcore: registered new interface driver usb_serial_simple
[    9.936312] usbserial: USB Serial support registered for carelink
[    9.942417] usbserial: USB Serial support registered for flashloader
[    9.948774] usbserial: USB Serial support registered for funsoft
[    9.954788] usbserial: USB Serial support registered for google
[    9.960714] usbserial: USB Serial support registered for hp4x
[    9.966462] usbserial: USB Serial support registered for kaufmann
[    9.972564] usbserial: USB Serial support registered for libtransistor
[    9.979096] usbserial: USB Serial support registered for moto_modem
[    9.985370] usbserial: USB Serial support registered for motorola_tetra
[    9.991999] usbserial: USB Serial support registered for nokia
[    9.997835] usbserial: USB Serial support registered for novatel_gps
[   10.004198] usbserial: USB Serial support registered for siemens_mpi
[   10.010559] usbserial: USB Serial support registered for suunto
[   10.016483] usbserial: USB Serial support registered for vivopay
[   10.022498] usbserial: USB Serial support registered for zio
[   10.030123] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   10.037980] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   10.066781] brcmfmac mmc1:0001:1: no of_node; not parsing pinctrl DT
[   10.066882] brcmfmac mmc1:0001:2: no of_node; not parsing pinctrl DT
[   10.069840] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   10.078493] brcmfmac mmc1:0001:3: no of_node; not parsing pinctrl DT
[   10.078682] usbcore: registered new interface driver brcmfmac
[   10.084512] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[   10.096175] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin
[   10.096367] usbcore: registered new interface driver cdc_mbim
[   10.113348] usbcore: registered new interface driver ipw
[   10.118692] usbserial: USB Serial support registered for IPWireless converter
[   10.127130] usbcore: registered new interface driver option
[   10.132743] usbserial: USB Serial support registered for GSM modem (1-port)
[   10.141426] usbcore: registered new interface driver qcserial
[   10.147222] usbserial: USB Serial support registered for Qualcomm USB modem
[   10.157192] usbcore: registered new interface driver rt2800usb
[   10.166529] usbcore: registered new interface driver rtl8192cu
[   10.175039] usbcore: registered new interface driver ath9k_htc
[   10.182989] kmodloader: done loading kernel modules from /etc/modules.d/*
[   10.300815] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[   10.308807] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jul 29 2022 02:15:20 version 7.45.250 (70e9766 CY) FWID 01-e53e306b
[   12.388807] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[   12.397866] bcmgenet fd580000.ethernet eth0: Link is Down
[   12.403348] device eth0 entered promiscuous mode
[   12.630787] brcmfmac mmc1:0001:1 phy0-sta0: renamed from wlan0
[   16.249103] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-sta0: link becomes ready
[   16.550627] IPv6: ADDRCONF(NETDEV_CHANGE): wan1: link becomes ready
[   16.557032] IPv6: ADDRCONF(NETDEV_CHANGE): wan2: link becomes ready
[   16.557482] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   36.960704] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[   36.992471] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7127, bcdDevice= 0.01
[   37.000744] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   37.007887] usb 2-2: Product: FM350-GL
[   37.011643] usb 2-2: Manufacturer: Fibocom Wireless Inc.
[   37.018106] usb 2-2: no of_node; not parsing pinctrl DT
[   37.033912] rndis_host 2-2:1.0: no of_node; not parsing pinctrl DT
[   37.036269] rndis_host 2-2:1.0 eth1: register 'rndis_host' at usb-0000:01:00.0-2, RNDIS device, 00:00:11:12:13:14
[   37.047504] option 2-2:1.2: no of_node; not parsing pinctrl DT
[   37.047556] option 2-2:1.2: GSM modem (1-port) converter detected
[   37.053810] option1 ttyUSB0: no of_node; not parsing pinctrl DT
[   37.054320] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[   37.061738] option 2-2:1.3: no of_node; not parsing pinctrl DT
[   37.061793] option 2-2:1.3: GSM modem (1-port) converter detected
[   37.068146] option1 ttyUSB1: no of_node; not parsing pinctrl DT
[   37.068554] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[   37.076230] option 2-2:1.4: no of_node; not parsing pinctrl DT
[   37.076283] option 2-2:1.4: GSM modem (1-port) converter detected
[   37.082665] option1 ttyUSB2: no of_node; not parsing pinctrl DT
[   37.083954] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[   37.092064] option 2-2:1.5: no of_node; not parsing pinctrl DT
[   37.092120] option 2-2:1.5: GSM modem (1-port) converter detected
[   37.098366] option1 ttyUSB3: no of_node; not parsing pinctrl DT
[   37.098521] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
[   37.107488] option 2-2:1.6: no of_node; not parsing pinctrl DT
[   37.107546] option 2-2:1.6: GSM modem (1-port) converter detected
[   37.113824] option1 ttyUSB4: no of_node; not parsing pinctrl DT
[   37.114236] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB4
[   37.121727] option 2-2:1.7: no of_node; not parsing pinctrl DT
[   37.121806] option 2-2:1.7: GSM modem (1-port) converter detected
[   37.128032] option1 ttyUSB5: no of_node; not parsing pinctrl DT
[   37.128300] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB5
[   37.135725] option 2-2:1.8: no of_node; not parsing pinctrl DT
[   37.135781] option 2-2:1.8: GSM modem (1-port) converter detected
[   37.142147] option1 ttyUSB6: no of_node; not parsing pinctrl DT
[   37.143477] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB6
[   37.150837] option 2-2:1.9: no of_node; not parsing pinctrl DT
[   37.150900] option 2-2:1.9: GSM modem (1-port) converter detected
[   37.157149] option1 ttyUSB7: no of_node; not parsing pinctrl DT
[   37.157430] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB7
[   44.870377] usb 2-2: USB disconnect, device number 2
[   44.875431] rndis_host 2-2:1.0 eth1: unregister 'rndis_host' usb-0000:01:00.0-2, RNDIS device
[   44.930784] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[   44.938828] option 2-2:1.2: device disconnected
[   44.943528] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[   44.951598] option 2-2:1.3: device disconnected
[   49.830812] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[   49.838924] option 2-2:1.4: device disconnected
[   49.843960] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[   49.853263] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[   49.861303] option 2-2:1.5: device disconnected
[   49.866531] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
[   49.874565] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[   49.883707] option 2-2:1.6: device disconnected
[   49.888656] option1 ttyUSB5: GSM modem (1-port) converter now disconnected from ttyUSB5
[   49.889762] option1 ttyUSB7: usb_wwan_open: submit read urb 0 failed: -19
[   49.896729] option 2-2:1.7: device disconnected
[   49.903472] option1 ttyUSB7: usb_wwan_open: submit read urb 1 failed: -19
[   49.908197] option1 ttyUSB6: GSM modem (1-port) converter now disconnected from ttyUSB6
[   49.914770] option1 ttyUSB7: usb_wwan_open: submit read urb 2 failed: -19
[   49.914801] option 2-2:1.8: device disconnected
[   49.922774] option1 ttyUSB7: usb_wwan_open: submit read urb 3 failed: -19
[   49.940971] option1 ttyUSB7: GSM modem (1-port) converter now disconnected from ttyUSB7
[   49.949037] option 2-2:1.9: device disconnected
[   50.310693] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[   50.341882] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7101, bcdDevice= 0.01
[   50.350082] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   50.357251] usb 2-2: Product: LTE USB CARD
[   50.361363] usb 2-2: Manufacturer: MediaTek Inc.
[   50.366802] usb 2-2: no of_node; not parsing pinctrl DT
[   50.377625] cdc_acm 2-2:1.0: no of_node; not parsing pinctrl DT
[   55.430647] usb 2-2: Disable of device-initiated U1 failed.
[   60.470646] usb 2-2: Disable of device-initiated U2 failed.
[   65.510744] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[   80.760421] usb 2-2: USB disconnect, device number 3
[   82.920426] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd
[   83.051156] usb 1-1.2: New USB device found, idVendor=0e8d, idProduct=2000, bcdDevice= 1.00
[   83.059531] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   83.066955] usb 1-1.2: Product: MT65xx Preloader
[   83.071584] usb 1-1.2: Manufacturer: MediaTek
[   83.077144] usb 1-1.2: no of_node; not parsing pinctrl DT
[   83.140830] cdc_acm 1-1.2:1.0: no of_node; not parsing pinctrl DT
[   83.180763] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[   84.358153] usb 1-1.2: USB disconnect, device number 4
[   95.020423] usb 1-1.2: new high-speed USB device number 5 using xhci_hcd
[   95.161080] usb 1-1.2: New USB device found, idVendor=0e8d, idProduct=2000, bcdDevice= 1.00
[   95.169430] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   95.176741] usb 1-1.2: Product: MT65xx Preloader
[   95.181354] usb 1-1.2: Manufacturer: MediaTek
[   95.185899] usb 1-1.2: no of_node; not parsing pinctrl DT
[   95.248734] cdc_acm 1-1.2:1.0: no of_node; not parsing pinctrl DT
[   95.288785] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[   96.448841] usb 1-1.2: USB disconnect, device number 5
[  130.371315] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
[  130.402537] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7127, bcdDevice= 0.01
[  130.410710] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  130.417845] usb 2-2: Product: FM350-GL
[  130.421590] usb 2-2: Manufacturer: Fibocom Wireless Inc.
[  130.427084] usb 2-2: no of_node; not parsing pinctrl DT
[  130.437497] rndis_host 2-2:1.0: no of_node; not parsing pinctrl DT
[  130.439831] rndis_host 2-2:1.0 eth1: register 'rndis_host' at usb-0000:01:00.0-2, RNDIS device, 00:00:11:12:13:14
[  130.450930] option 2-2:1.2: no of_node; not parsing pinctrl DT
[  130.450976] option 2-2:1.2: GSM modem (1-port) converter detected
[  130.457211] option1 ttyUSB0: no of_node; not parsing pinctrl DT
[  130.457360] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[  130.464626] option 2-2:1.3: no of_node; not parsing pinctrl DT
[  130.464682] option 2-2:1.3: GSM modem (1-port) converter detected
[  130.470887] option1 ttyUSB1: no of_node; not parsing pinctrl DT
[  130.471119] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[  130.478372] option 2-2:1.4: no of_node; not parsing pinctrl DT
[  130.478424] option 2-2:1.4: GSM modem (1-port) converter detected
[  130.484664] option1 ttyUSB2: no of_node; not parsing pinctrl DT
[  130.484863] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[  130.492170] option 2-2:1.5: no of_node; not parsing pinctrl DT
[  130.492221] option 2-2:1.5: GSM modem (1-port) converter detected
[  130.498442] option1 ttyUSB3: no of_node; not parsing pinctrl DT
[  130.498641] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
[  130.506003] option 2-2:1.6: no of_node; not parsing pinctrl DT
[  130.506070] option 2-2:1.6: GSM modem (1-port) converter detected
[  130.512356] option1 ttyUSB4: no of_node; not parsing pinctrl DT
[  130.512829] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB4
[  130.520402] option 2-2:1.7: no of_node; not parsing pinctrl DT
[  130.520471] option 2-2:1.7: GSM modem (1-port) converter detected
[  130.526753] option1 ttyUSB5: no of_node; not parsing pinctrl DT
[  130.527088] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB5
[  130.535082] option 2-2:1.8: no of_node; not parsing pinctrl DT
[  130.535157] option 2-2:1.8: GSM modem (1-port) converter detected
[  130.541431] option1 ttyUSB6: no of_node; not parsing pinctrl DT
[  130.541754] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB6
[  130.549032] option 2-2:1.9: no of_node; not parsing pinctrl DT
[  130.549092] option 2-2:1.9: GSM modem (1-port) converter detected
[  130.555430] option1 ttyUSB7: no of_node; not parsing pinctrl DT
[  130.555690] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB7
[  138.071826] option1 ttyUSB2: usb_wwan_open: submit read urb 0 failed: -19
[  138.078627] option1 ttyUSB2: usb_wwan_open: submit read urb 1 failed: -19
[  138.085424] option1 ttyUSB2: usb_wwan_open: submit read urb 2 failed: -19
[  138.092212] option1 ttyUSB2: usb_wwan_open: submit read urb 3 failed: -19
[  138.099244] option1 ttyUSB1: usb_wwan_open: submit read urb 0 failed: -19
[  138.101175] usb 2-2: USB disconnect, device number 4
[  138.106039] option1 ttyUSB1: usb_wwan_open: submit read urb 1 failed: -19
[  138.111061] rndis_host 2-2:1.0 eth1: unregister 'rndis_host' usb-0000:01:00.0-2, RNDIS device
[  138.117766] option1 ttyUSB1: usb_wwan_open: submit read urb 2 failed: -19
[  138.133069] option1 ttyUSB1: usb_wwan_open: submit read urb 3 failed: -19
[  138.140202] option1 ttyUSB0: usb_wwan_open: submit read urb 0 failed: -19
[  138.147026] option1 ttyUSB0: usb_wwan_open: submit read urb 1 failed: -19
[  138.153855] option1 ttyUSB0: usb_wwan_open: submit read urb 2 failed: -19
[  138.160647] option1 ttyUSB0: usb_wwan_open: submit read urb 3 failed: -19
[  138.168476] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[  138.178730] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[  138.188546] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[  138.211663] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  138.219700] option 2-2:1.2: device disconnected
[  138.224437] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  138.232466] option 2-2:1.3: device disconnected
[  138.237164] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  138.245193] option 2-2:1.4: device disconnected
[  138.250113] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[  138.258138] option 2-2:1.5: device disconnected
[  142.871338] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[  142.880767] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
[  142.881568] option1 ttyUSB7: usb_wwan_open: submit read urb 0 failed: -19
[  142.888822] option 2-2:1.6: device disconnected
[  142.895568] option1 ttyUSB7: usb_wwan_open: submit read urb 1 failed: -19
[  142.895826] option1 ttyUSB5: GSM modem (1-port) converter now disconnected from ttyUSB5
[  142.900095] option1 ttyUSB7: usb_wwan_open: submit read urb 2 failed: -19
[  142.900129] option 2-2:1.7: device disconnected
[  142.906882] option1 ttyUSB7: usb_wwan_open: submit read urb 3 failed: -19
[  142.907260] option1 ttyUSB6: usb_wwan_open: submit read urb 0 failed: -19
[  142.939752] option1 ttyUSB6: usb_wwan_open: submit read urb 1 failed: -19
[  142.946534] option1 ttyUSB6: usb_wwan_open: submit read urb 2 failed: -19
[  142.953317] option1 ttyUSB6: usb_wwan_open: submit read urb 3 failed: -19
[  142.960230] option1 ttyUSB6: GSM modem (1-port) converter now disconnected from ttyUSB6
[  142.968345] option 2-2:1.8: device disconnected
[  142.968477] option1 ttyUSB7: usb_wwan_open: submit read urb 0 failed: -19
[  142.979691] option1 ttyUSB7: usb_wwan_open: submit read urb 1 failed: -19
[  142.986480] option1 ttyUSB7: usb_wwan_open: submit read urb 2 failed: -19
[  142.993282] option1 ttyUSB7: usb_wwan_open: submit read urb 3 failed: -19
[  143.000326] option1 ttyUSB7: GSM modem (1-port) converter now disconnected from ttyUSB7
[  143.008454] option 2-2:1.9: device disconnected
[  143.361631] usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd
[  143.392323] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7101, bcdDevice= 0.01
[  143.400515] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  143.407670] usb 2-2: Product: LTE USB CARD
[  143.411769] usb 2-2: Manufacturer: MediaTek Inc.
[  143.416728] usb 2-2: no of_node; not parsing pinctrl DT
[  143.429773] cdc_acm 2-2:1.0: no of_node; not parsing pinctrl DT
[  148.471652] usb 2-2: Disable of device-initiated U1 failed.
[  153.511746] usb 2-2: Disable of device-initiated U2 failed.
[  158.551929] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[  173.871855] usb 2-2: USB disconnect, device number 5
[  176.031880] usb 1-1.2: new high-speed USB device number 6 using xhci_hcd
[  176.182540] usb 1-1.2: New USB device found, idVendor=0e8d, idProduct=2000, bcdDevice= 1.00
[  176.190906] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  176.198217] usb 1-1.2: Product: MT65xx Preloader
[  176.202829] usb 1-1.2: Manufacturer: MediaTek
[  176.207380] usb 1-1.2: no of_node; not parsing pinctrl DT
[  176.270302] cdc_acm 1-1.2:1.0: no of_node; not parsing pinctrl DT
[  176.310383] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[  177.459393] usb 1-1.2: USB disconnect, device number 6
[  188.132092] usb 1-1.2: new high-speed USB device number 7 using xhci_hcd
[  188.262864] usb 1-1.2: New USB device found, idVendor=0e8d, idProduct=2000, bcdDevice= 1.00
[  188.271213] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  188.278523] usb 1-1.2: Product: MT65xx Preloader
[  188.283136] usb 1-1.2: Manufacturer: MediaTek
[  188.287669] usb 1-1.2: no of_node; not parsing pinctrl DT
[  188.350516] cdc_acm 1-1.2:1.0: no of_node; not parsing pinctrl DT
[  188.390558] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[  189.569454] usb 1-1.2: USB disconnect, device number 7
AlekZo commented 1 week ago

I have noticed the following in the log "usb 2-2: no of_node; not parsing pinctrl DT":

[  130.371315] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
[  130.402537] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7127, bcdDevice= 0.01
[  130.410710] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  130.417845] usb 2-2: Product: FM350-GL
[  130.421590] usb 2-2: Manufacturer: Fibocom Wireless Inc.
[  130.427084] usb 2-2: no of_node; not parsing pinctrl DT

I also noticed that the Fibocom FM350-GL is missing in the 77-mm-fibocom-port-types.rules file.

How can I add it? How do I know the code I need to insert there? There is also a comment at the beginning of the file:

# Do not edit this file; it will be overwritten on update.

So, I think my change would not be applied.

AlekZo commented 1 week ago

I added this to the 77-mm-fibocom-port-types.rules file. But it did not worked

# Fibocom FM350-GL
# ttyUSB0 (if #6): MD AT
# ttyUSB1 (if #3): AP GNSS
# ttyUSB2 (if #2): AP Log
# ttyUSB3 (if #4): AP META
# ttyUSB4 (if #9): Debug
# ttyUSB5 (if #7): MD Meta
# ttyUSB6 (if #8): NPT

ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="7127", ENV{.MM_USBIFNUM}=="06", SUBSYSTEM=="tty", ENV{ID_MM_PORT_TYPE_AT_PRIMARY}="1"
ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="7127", ENV{.MM_USBIFNUM}=="03", SUBSYSTEM=="tty", ENV{ID_MM_PORT_TYPE_GPS}="1"
ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="7127", ENV{.MM_USBIFNUM}=="02", SUBSYSTEM=="tty", ENV{ID_MM_PORT_TYPE_AT_SECONDARY}="1"
ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="7127", ENV{.MM_USBIFNUM}=="04", SUBSYSTEM=="tty", ENV{ID_MM_PORT_TYPE_DIAG}="1"
ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="7127", ENV{.MM_USBIFNUM}=="09", SUBSYSTEM=="tty", ENV{ID_MM_PORT_IGNORE}="1"
ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="7127", ENV{.MM_USBIFNUM}=="07", SUBSYSTEM=="tty", ENV{ID_MM_PORT_TYPE_QCDM}="1"
ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="7127", ENV{.MM_USBIFNUM}=="08", SUBSYSTEM=="tty", ENV{ID_MM_PORT_TYPE_NMEA}="1"
Ysurac commented 1 week ago

There is a big topic on OpenWRT forum: https://forum.openwrt.org/t/fibocom-fm350-gl-support/142682 Maybe this can help... I really don't know anything about this modem.

cr08 commented 4 days ago

I've had this card for a hot minute now. I've only briefly tried it on OMPTCP so can't comment on specifics but I have tried it with OpenWRT proper and other forks. The link posted just above me is a great resource. I'll add two more for packages that exist to better manage this card:

https://forum.openwrt.org/t/fibocom-fm350-gl-support/142682/133 https://github.com/koshev-msk/modemfeed > There's fm350 named packages here and they have precompiled packages for a couple different mainline OWRT versions. @Ysurac might need to advise which would be the closest to what OMPTCP uses but I think when I VERY briefly tried this I pulled from the 23.05 repo and it didn't throw any immediate errors. Ignore me. I see you're already using this one. I'll keep the other link around as an extra option.

The FM350 is handled a bit different from most other cards I've seen. TL;DR version: A number of AT commands need to be run in specific order to assign the correct PDP/APN credentials, activate and connect the card, then pull the IP info it has. There's a separate RNDIS eth device with no DHCP and the IP info pulled via AT commands is used to manually configure this interface. The above packages will do this all automatically. QMI/MBIM/ModemManager don't support it. I think MM is being worked on but at last check it only supports the card in PCIe mode currently but not USB.

I think I read in one of the comments on the OpenWRT forum thread linked that ModemManager may actually conflict so you may want to disable this in the settings in OMPTCP and see if that helps.

If you have any luck getting it to work reliably, would love to hear about your experience and any tips. I've been working on my own little project off and on and currently I've been sticking closely to stock OpenWRT with Speedify added on but Speedify feels like it has a bit of a performance penalty. I'd love to give OMPTCP a go again but the UDP situation currently stops me from pursuing it further.