Open driccee opened 3 weeks ago
Wrong category for the issue... What images are you using ?
Hello @Ysurac ,
Sorry for the category selecction,
I'm using this images. See if you can help me with this.
Ubiquiti Edgerouter X (alpha support with issues) squashfs image: openmptcprouter-v0.60-6.1-r0+24843-acf40c022e-ramips-mt7621-ubnt_edgerouter-x-squashfs-sysupgrade.bin (2024/04/09 - 41.75Mo - [sha256sum]
For appliance x86-64 (64-bits) ext4 image (EFI): openmptcprouter-v0.60-6.1-r0+24843-acf40c022e-x86-64-generic-ext4-combined-efi.img.gz (2024/04/09 - 71.83Mo - [sha256sum]
Thanks.
For x86_64, use the snapshot image: https://github.com/Ysurac/openmptcprouter/wiki/Snapshots For the Ubiquiti, I need to try but not sure if I will keep support on this, it's really too slow.
Thank you @Ysurac My appliance is now installed. Thank you very much for your support.
Hello,
First of all, thank you for the very novel solution, the truth is that it looks quite promising and I hope it continues to improve.
I will comment a little about my attempts to test the solution. I am using EdgeRouter X as a router, version: v0.58.4, it works well, the detail is when I try to change the version to the most current one, the system is constantly booting, I don't know if it is not compatible or if an update is required, I have tried to upload a firmware but unfortunately I have not been able to upload it, I understand that the most current versions require a kernel higher than 6.x. Just to confirm, I don't know if you can help me that the hardware is not compatible?
In addition to this, I have purchased this equipment from Amazon: https://www.amazon.com/SENSTUN-Firewall-Appliance-Puertos-Barebone/dp/B0CG6RJ6KT/ref=sr_1_2_sspa?crid=2XFSA5F0BAUPQ&dib=eyJ2IjoiMSJ9.2LHtlLH_xkFgiOVelojVnGHXlW_Scrdza3XP3Lquvm-rDqMRNntDzKxb1SVQleZytGBncP7ayBwYoe1ImPdXZaru9h8uEcgmZi6tLzKLhRmM9_Xy88GHM0e950ihASRsAUc7Nbd-JCL8rsgWSuXerrV2ua0ZYHP84F2r3IMYOYhZHxyxiOkkWYHbyeXXxKlHplyHu_iM8oWh4VLnHcpUE7Of9uuPYMa2uTix1gVVs3o.SSVhwpvltYD9ewIlXNYXRbhwc4FHhHMh64v1Vqt-msA&dib_tag=se&keywords=router%2Bbarebone&qid=1720539380&sprefix=%2Caps%2C271&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
And Unfortunately it restarts every time, I uploaded the image directly to the SSD with Etcher, I also tried with USB and microSD, I get the same problem, I don't know if it's because of the hardware or something I'm doing wrong. Maybe someone can guide me in something. I'm looking for where I can install and not get these problems.
Thanks.