search

Ysurac / openmptcprouter

OpenMPTCProuter is an open source solution to aggregate multiple internet connections using Multipath TCP (MPTCP) on OpenWrt
https://www.openmptcprouter.com/
GNU General Public License v3.0
1.83k stars 259 forks source link

OpenVPN or Wireguard with Hetzner #3560

Open mastersteve opened 3 weeks ago

mastersteve commented 3 weeks ago

Sorry for my ignorance...

But i spend many time to get connection to my LAN by OpenVPN or Wireguard without success. IP-Adress from my OpenMPTCPRouter is 192.168.50.1. I have 2 x Starlink connect to the Router. The OpenMPTCPRouter is connected to an Dream Machine SE. My LAN-Range is 192.168.1.1 - 192.168.1.254 The Firewall-Ports at HETZNER are open from 65000 - 65535 and i get an pulic-ip 128.140.xxx.xxxx I have public keys and private keys configurate in OpenVPN and Wireguard. But there is no connection. Something i do wrong. But what?!

Thank you very much for support!

Regards

Steve

Expected Behavior

Current Behavior

Specifications

dersch81 commented 3 weeks ago

I have tried this today, too. Just have a pfsense as the WG server behind the OMR. After searching here I found hints that the best way would be to let the VPS act as the VPN Server and route to the OMR and specific networks. And that makes sense, remember your DM is now behind two other routers and you should go with routing instead then Double NAT.

So far I can't make a guide because i'm still in my own findings. But at a later point I will try to make some guides when things work well and are stable testen.