Ysurac
commented
5 years ago The Freebox give an IPv6 to all computer, so by default it's used in speed test that support IPv6. You should try to disable IPv6, should work by setting fe80::2 as next hop
Closed Ausstriken closed 5 years ago
Ysurac
commented
5 years ago The Freebox give an IPv6 to all computer, so by default it's used in speed test that support IPv6. You should try to disable IPv6, should work by setting fe80::2 as next hop
Ausstriken
commented
5 years ago Hello Ysurac,
Thank you! It work now!
Le sam. 7 sept. 2019 à 19:01, Ycarus (Yannick Chabanois) < notifications@github.com> a écrit :
The Freebox give an IPv6 to all computer, so by default it's used in speed test that support IPv6. You should try to disable IPv6, should work by setting fe80::2 as next hop
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Ysurac/openmptcprouter/issues/644?email_source=notifications&email_token=AND2WIGJS3SP7CBNI7PKHLTQIPM5VA5CNFSM4IUQUPB2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6E5E6Q#issuecomment-529126010, or mute the thread https://github.com/notifications/unsubscribe-auth/AND2WICZLTFSTI75E64EVIDQIPM5VANCNFSM4IUQUPBQ .
Hello,
I'm french guy so my english can be bad XD
Material:
The RP3, Freebox, Router 4G are all in RJ45 on the wifi switch.
After carefully following the install documentation of RPI3, VPS, etc. In system / openmptcprouter / status everything is "green". but when I do a speedtest on my pc, i feel that i use only my wan1 (box free) which is 25 mb / s. However when i do the test on nperf, i have the aggregation of my wan1 and wan2 = 80mb / s. When I download a test file (1GO), my flow is 25mb / s ...
I also tested with my smarthphone (connected to the wifi switch) and the flow is equal to wan1 (box free) 25mb/s
It's been 3 weeks that I try to find the issue ...
Helps please :)
You will find attached all parameters Parameters.txt
Specifications