Closed eford321 closed 3 years ago
Hi I didn’t’ check all examples from MaximKulkin , as you see
https://github.com/Yurik72/ESPHap/tree/master/examples
contains examples for most of used devices….
About magic_home. Due to my preference to play with WS2812 led strip I has implemented https://github.com/Yurik72/ESPHap/blob/master/examples/EspHap_RGB_Motion/EspHap_RGB_Motion.ino
Magic_home is little different and contains just 3 channel of color.
Using WS2812 give more effects including any firing effect ang usage as Text matrix….
In my home I have used devices which installed https://github.com/Yurik72/ESPHomeController library
Due time limitation is not properly documented and user interface is not finished.
But library contains possibility to control WS2812 and 3 channel RGB
I can make implementation of Magic Home or can help you😊
From: eford321 notifications@github.com Sent: Friday, March 5, 2021 10:24 PM To: Yurik72/ESPHap ESPHap@noreply.github.com Cc: Subscribed subscribed@noreply.github.com Subject: [Yurik72/ESPHap] Adding examples from @maximkulkin ESP-RTOS repository (#70)
Have you converted any of the RTOS examples from @maximkulkin https://github.com/maximkulkin 's repository to run on ESPHap?
I was planning to experiment with the magic home example: https://github.com/maximkulkin/esp-homekit-demo/tree/master/examples/magic_home_strip
Any recommendations from your previous work?
Thanks.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Yurik72/ESPHap/issues/70 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AKDREXKD4UU3MPFXOKK4DXTTCE4XJANCNFSM4YV2XYVQ . https://github.com/notifications/beacon/AKDREXKIHBGE77LY7QIMG3DTCE4XJA5CNFSM4YV2XYV2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4MIT44NA.gif
Thanks for the feedback. There's really nothing special about the Magic Home controller unless you have the RF controller. I see your examples already support most of this, I will work to combine parts of the examples EspHap_RGB_Motion and EspHapAdvancedDimmableLed into an RGB strip sketch.
I still have 5 more blinds to make and 3 Sonoff switches to convert to ESPHap before I look at LEDs.😊
I agree on the WS2812. I will use them for new installs. I still have 3 large RGB strips installed that I will convert from MQTT to ESPHap.
As well please have a look esphomecontroler, I have started with that, but due to absence any good HomeKit library switched to esphap, at least try one device with the one device, it supports major basics
Sent from my iPhone
On 6 Mar 2021, at 17:47, eford321 notifications@github.com wrote:
Thanks for the feedback. There's really nothing special about the Magic Home controller unless you have the RF controller. I see your examples already support most of this, I will work to combine parts of the examples EspHap_RGB_Motion and EspHapAdvancedDimmableLed into an RGB strip sketch.
I still have 5 more blinds to make and 3 Sonoff switches to convert to ESPHap before I look at LEDs.😊
I agree on the WS2812. I will use them for new installs. I still have 3 large RGB strips installed that I will convert from MQTT to ESPHap.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
I will take a look. Thanks.
On Sat, Mar 6, 2021 at 11:38 AM Yurik72 notifications@github.com wrote:
As well please have a look esphomecontroler, I have started with that, but due to absence any good HomeKit library switched to esphap, at least try one device with the one device, it supports major basics
Sent from my iPhone
On 6 Mar 2021, at 17:47, eford321 notifications@github.com wrote:
Thanks for the feedback. There's really nothing special about the Magic Home controller unless you have the RF controller. I see your examples already support most of this, I will work to combine parts of the examples EspHap_RGB_Motion and EspHapAdvancedDimmableLed into an RGB strip sketch.
I still have 5 more blinds to make and 3 Sonoff switches to convert to ESPHap before I look at LEDs.😊
I agree on the WS2812. I will use them for new installs. I still have 3 large RGB strips installed that I will convert from MQTT to ESPHap.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/Yurik72/ESPHap/issues/70#issuecomment-791986052, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNX7J66VE2KG655BDKMMTTTCJK7NANCNFSM4YV2XYVQ .
Have you converted any of the RTOS examples from @maximkulkin's repository to run on ESPHap?
I was planning to experiment with the magic home example: https://github.com/maximkulkin/esp-homekit-demo/tree/master/examples/magic_home_strip
Any recommendations from your previous work?
Thanks.