Add some technical parameters for Z-Uno at website

Z-Wave-Me / Z-Uno-Core

Core files for Z-Uno support in Arduino IDE 1.6.5

21 stars 12 forks source link

Add some technical parameters for Z-Uno at website #82

Open michapr opened 8 years ago

michapr commented 8 years ago

can you please add some information about the Z-Uno on website - users could need it for right usage

max current for the digital output pins
max current for the 5V / 3.3V output if external power will be used (for supply of additional components) (I think there mybe a thermal limit)
used current for the different modes (always on, sleeping or FLiRS)
Limits for power supply for "3V" and "5V" - as sample module will work for 3V input ( 1.8...3.3V max (???) ) 5V input ( 4.2V ... 6V max (???) ) -> so user could define a battery type

Thanks!

michapr commented 8 years ago

Thanks, something already done! ;)

Can you please add this info?

Limits for power supply for "3V" and "5V" - as sample module will work for 3V input ( 1.8...3.3V max (???) ) 5V input ( 4.2V ... 6V max (???) ) -> so user could define a battery type
max current for the 5V / 3.3V output pin if external power will be used (for supply of additional components) (I think there mybe a thermal limit)

PoltoS commented 8 years ago

@p0lyg0n1 подскажешь? максимум известных тебе цифр о потреблении, макс. токах и прочему

PoltoS commented 8 years ago

Is this enough https://z-uno.z-wave.me/technical/ ?

michapr commented 8 years ago

missing (please check, what is correct,... ;) ...): working battery range: for 3V input: 2.7V...3.3V input power range for 5V input: 4V... 6V (?) - if it could be used as input max output current for 3.3V output (ext.devices) if supply by pin "7-16V" : 100mA (?) max output current for 5V output (ext. devices) if supply by pin "7-16V" : 100mA (?)

Note Do not supply the Z-Uno with ext. Battery AND USB-power/"7-16V" input, the battery power input is not protected

maybe show at any page this detail: "by unsoldering R12" - where R12 is located ?