search

Z-Wave-Me / Z-Uno-Core

Core files for Z-Uno support in Arduino IDE 1.6.5
21 stars 12 forks source link

HomeCenter2 - no values #85

Closed michapr closed 8 years ago

michapr commented 8 years ago

Using HC2 4.083 beta

Have included device - without problems: [15:05:44] Home Center ist im Lernmodus. [15:05:48] Modul hinzugefügt [15:05:48] Hinzufügen des Netzknoten Status Protokols abgeschlossen [15:05:48] Hinzufügen des Modul abgeschlossen. [15:05:52] ID 176: Set association for group 1 [15:05:52] ID 176: Received association report from group 1 [15:05:52] ID 176: Received association report from group 1 [15:05:53] ID 176: Set association for group 1 [15:05:53] ID 176: Received association report from group 1 [15:05:56] ID 176: Device configuration finished [15:05:57] ID 176: Device configuration finished

hc2_z-uno-temp_sketch

Values will not be changed.

Sketch attached - same sketch is working with OZW (after reinclude - see #84) If I will enable the Serial.print - COM port maybe lost. Or nothing willbe printed out.

Using OZW - values will be printed out. No idea how this is connected...

ZUnoSimpleMultiSensor1.zip

PoltoS commented 8 years ago

Is it 100% reproducible? We will try it on monday.

We need Z-Uno version too (does it happen on 2.0.3 too?)

michapr commented 8 years ago

Is working with HC2 4.090 and Beta release 2.0.3 Problem exist at stable release 2.0.2 only

PoltoS commented 8 years ago

So we can close it? Looks we fixed it too fast ;)

michapr commented 8 years ago

yes, for beta 2.0.3 can be closed - it is existing, while current stable release is out.