search

Z4urce / VRC-Haptic-Pancake

A dirt cheap solution to enable haptic feedback on the vive (and other OpenVR compatible) trackers in VRChat (Or other OSC compatible VR games)
GNU General Public License v3.0
77 stars 4 forks source link

STL Print for Vive Ultimate Trackers? #7

Open TrademarkPoIicy opened 6 months ago

Z4urce commented 6 months ago

Waiting for a donation of Vive Ultimate trackers so I can make an STL for them as well.

TrademarkPoIicy commented 6 months ago

I see where you are coming from needing the tracker to make sure the STL fits properly around the housing. If I had the extra money I would donate a set of trackers to you but I do not sadly. I would also like to state I am not good at CAD took one year in middle school but I can be relentless. So I have slowly started working on making housing for a haptic motor plus an easy way of connecting/disconnecting wires using screws and pogo pins combined with the ability to clip the plate that screws on a strap on the back of the tracker making there be pressure for the Pogo pins to pop into place. There is also a stl available on Vives website of the tracker. On another note, I'd like to thank you for the work that you have put in on the project and please keep up the great job. :3

TrademarkPoIicy commented 5 months ago

Well this took longer than I thought it would but here it is...

Vive_Ultimate_Tracker_Screw-On-MountHaptic-Pancake External-Wire-Crimping.zip

I'm gonna go watch anime now