Currently the user must calculate volts per pixel manually using a crappy procedure. It would be preferable if this value was calculated based on user input as to the hardware present.
Instead add scanner settings for:
Control value range. e.g. 10 means -10V to +10V
min/max optical scan angle. e.g. 30 means a scan range from-30 optical degrees to +30 optical degrees
For camera add:
Objective focal length
Tube lens focal length
Camera pixel size in microns
From the above we can calculate:
The microns per pixel on the camera
mm/optical degree from which we can infer volts/pixel
Currently the user must calculate volts per pixel manually using a crappy procedure. It would be preferable if this value was calculated based on user input as to the hardware present.
Instead add scanner settings for:
10means-10Vto+10V30means a scan range from-30 optical degreesto+30 optical degreesFor camera add:
From the above we can calculate: