search

Zefau / ioBroker.roomba

Connect your iRobot Roomba to ioBroker
MIT License
13 stars 6 forks source link

Charging station isn't on the right position on minimap #23

Closed senger1985 closed 5 years ago

senger1985 commented 5 years ago

If my Roomba is on the charging station, it shows not the right position, on the minimap.(yellow house image)

I'ven't changed the position on any time

Zefau commented 5 years ago

Thanks for the reporting the issue. Apparently, the house indicates the starting position of the Roomba, not exactly the charging station.

I will have a look at this, if I can put both on the map.

Zefau commented 5 years ago

I have reworked placing home icon with v1.0.2. Could you please test and verify if it was successful?

senger1985 commented 5 years ago

I'll test it tomorrow and will tell you the result

senger1985 commented 5 years ago

I don't know, could be, that my Roomba lost for a moment the conection, to the station. But I've seen, that the Robot-Icon hasn't move on the map and as the robot finished the current job the Icon stay anywhere on the map. The Station-Icon is on the right possison.

Zefau commented 5 years ago

ah ok, I probably got you wrong then. The home icon (yellow house) is placed correctly, but the Roomba icon is not updated at the end of the mission (when it is moving to the yellow house)?

senger1985 commented 5 years ago

Exactly.

Zefau commented 5 years ago

I updated the repository to address this bug. It is absolutely untested, but I will do so this week. If you'd like you can try and install the current Github version and join testing.

senger1985 commented 5 years ago

At this time I only get the version 1.0.3 via github (octocat-icon) This version is from 2019-23-07

Zefau commented 5 years ago

That's correct, I haven't changed the version number yet. The change is included though.

senger1985 commented 5 years ago

Okay, than I'll test it tomorrow and I'll report

senger1985 commented 5 years ago

I don't know what the problem is, but the map is now rotated 180 degrees and the robot is in another place.

But now the home icon (yellow house) is in the right place.

I have no problem with that anymore. Main thing he shows me where he is driving long.

if you want, you can close the case.

Zefau commented 5 years ago

How many times have you run the Roomba that the map was rotated? I have the same issue every now and then and I suspect the data transmitted by the Roomba is differently for some reason.

Please observe this issue with the rotated map and I would appreciate if you report back here in a week or so.

Thank you very much for your support!

senger1985 commented 5 years ago

I'll do some test runs in the next few days

senger1985 commented 5 years ago

I have find out that I have connection problems. My Robby always stays in the same position on the map and the icon does not move. I have to send it in anyway because I have problems with charging. I'll give an update if I can continue testing the adapter

Zefau commented 5 years ago

Connection problems are also reported in the forum https://forum.iobroker.net/topic/7657/irobot-roomba-adapter/225.

Zefau commented 5 years ago

I publish a version v1.0.4. Please test this one. It updates the dependencies to the latest version, which might fix the problem.

Zefau commented 5 years ago

Connection issue has been fixed in v1.0.5. Please install and try again. If the error persists, please open a dedicated issue for that problem.