search

Zendure / developer-device-data-report

Subscribe to device data for Zendure products. To receive information from the device, Developers can obtain the same device information as the official App by subscribing to Zendure MQTT Broker
84 stars 3 forks source link

MQTT not sending 0 values #35

Open thierrywehr opened 10 months ago

thierrywehr commented 10 months ago

Hello i'am using home assistant mqtt and only non zero data from solarflow are received to be more precise an example get data for entitie packInputPower when it is above 0 as soon as it drops to 0 ( no power ) mqtt is not updating Home Assistant any idea to correct this

Thierry

Zendure commented 9 months ago

When it drops to 0, is the device still online? If the device remains online, not in standby mode, and there are data changes, MQTT should be able to update the data in real-time.

thierrywehr commented 9 months ago

yes the device is still online i have discovered that the only way to make it send updates is to go in the zendure mobile application and confirm existing "rendez vous" configuration which will enforce a flush of all full mqtt datas including voltage for example the strangness is that when the zendure application shows the solarflow offline i can still see mqtt updates coiming from the zendure cloud and updating but all solarflow configuration is stucked this means that the solarflow HUB is still connected to internet but the application is not able to reach it i can clearly see issues with the zendure cloud which impact the usage of the solraflow the best would be to be able to send direct mqtt actions to the solaflow and bypass the zendure cloud which is buggy and overbooked i can demonstrate that since last few days, datas in zendure cloud are wrong despite the fact that it is working smoothly

Le jeu. 29 févr. 2024 à 11:00, Zendure @.***> a écrit :

When it drops to 0, is the device still online? If the device remains online, not in standby mode, and there are data changes, MQTT should be able to update the data in real-time.

— Reply to this email directly, view it on GitHub https://github.com/Zendure/developer-device-data-report/issues/35#issuecomment-1970767840, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEHOERV3CWS4QG3ZN46SMYTYV352HAVCNFSM6AAAAABCLHWIF6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZQG43DOOBUGA . You are receiving this because you authored the thread.Message ID: @.***>

stefan-peters commented 4 months ago

I can confirm the same problem. The last "0" is not always send and the values remain on the last non-0 value.

leop800 commented 3 months ago

I have the same problem, no zero value and they remains with last value

drschnalli commented 2 months ago

I also got the same issue. Output pack power still shows 36 Watts even its not outputting anything :(