search

ZeroPhone / ZeroPhone-PCBs

PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
GNU General Public License v3.0
139 stars 10 forks source link

3D model of TP4056 charger breakout #25

Open CRImier opened 7 years ago

CRImier commented 7 years ago

As I'm going to throw in quite some photos, I'm adding a new issue for the TP4056 board so that everybody who opens #12 doesn't have to load all the photos.

Board width Board width Board length - with MicroUSB port sticking out Board length - with MicroUSB port sticking out Board length - without MicroUSB Board length - without MicroUSB Width of USB connector - without metal flaps Width of USB connector - without metal flaps Width of MicroUSB connector - with metal flaps Width of MicroUSB connector - with metal flaps Height of MicroUSB connector - with metal flaps Height of MicroUSB connector - with metal flap Height of MicroUSB connector - without metal flaps Height of MicroUSB connector - without metal flaps Depth of MicroUSB connector Depth of MicroUSB connector Distance from breakout top to back PCB top Distance from breakout top to back PCB top - 3mm

PCB thickness - 1mm

CRImier commented 7 years ago

It would also be very helpful to actually see the 8-pin IC on the breakout on the board - so that the copper can be exposed in the right place on the board, as well as to be able to position the board correctly. The IC is in SOIC-8 package and its model can be found in KiCad 3D model collection (for example, the same model is used for RTC IC on the bottom of the back board).

CRImier commented 7 years ago

Board modelling work started here