What steps will reproduce the problem?
1.when the gps cable is connected with apm the osd dont show data ,or
freeze,""" or chance data screen configuration when the throttle come down""
2.when the gps cable is disconnected from apm the osd work well
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
gps type quanum lea 6h gps
the osd version is minimosd 1.1 firmware 2.2 extra copter, the apm firmare
3.2.1 exa configuration the operating system is windows vista.
Please provide any additional information below.
i make the configuration for apm
SERIAL1_BAUD, 57 (telemetry output at 57600)
SR1_EXT_STAT, 2 ( 2hz for waypoints, GPS raw, fence data, current waypoint,
etc)
SR1_EXTRA1, 5 ( 5hz for attitude and simulation state)
SR1_EXTRA2, 2 ( 2hz for VFR_Hud data )
SR1_EXTRA3, 3 ( 3hz for AHRS, Hardware Status, Wind )
SR1_POSITION, 2 ( 2hz for location data )
SR1_RAW_SENS, 2 ( 2hz for raw imu sensor data )
SR1_RC_CHAN, 5 ( 5hz for radio input or radio output data )
If you fly copter than you also need to set SR0 also:
SR0_EXT_STAT, 2
SR0_EXTRA1, 5
SR0_EXTRA2, 2
SR0_EXTRA3, 3
SR0_POSITION, 2
SR0_RAW_SENS, 2
SR0_RC_CHAN, 5
Change accordingly and save the parameters to APM
Original issue reported on code.google.com by p66cha...@gmail.com on 15 May 2015 at 7:17
Original issue reported on code.google.com by
p66cha...@gmail.comon 15 May 2015 at 7:17