search

Zip-o-mat / Slic3r

Slic3r with integrated electronics and Nonplanar slicer (see branches)
GNU Affero General Public License v3.0
602 stars 100 forks source link

Issue running export line of code #18

Open maggiefannick opened 4 years ago

maggiefannick commented 4 years ago

I'm having issues with the export command not being able to export PERL5LIB. My code is below:

maggie@maggie-VirtualBox:~$ cd Slic3r maggie@maggie-VirtualBox:~/Slic3r$ git checkout nonplanar M Build.PL Already on 'nonplanar' Your branch is up to date with 'origin/nonplanar'. maggie@maggie-VirtualBox:~/Slic3r$ cd build maggie@maggie-VirtualBox:~/Slic3r/build$ cmake .. PATH: /home/maggie/Slic3r/local-lib/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin PERL5LIB: /home/maggie/Slic3r/local-lib/lib/perl: Slic3r will be built with GUI support -- PERL_INCLUDE_PATH = /usr/lib/x86_64-linux-gnu/perl/5.26/CORE -- PERL_LIBRARY = /usr/lib/x86_64-linux-gnu/libperl.so.5.26 -- PERL_EXECUTABLE = /usr/bin/perl -- PERL_SITESEARCH = UNKNOWN -- PERL_SITELIB = /usr/local/share/perl/5.26.1 -- PERL_VENDORARCH = /usr/lib/x86_64-linux-gnu/perl5/5.26 -- PERL_VENDORLIB = /usr/share/perl5 -- PERL_ARCHLIB = /usr/lib/x86_64-linux-gnu/perl/5.26 -- PERL_PRIVLIB = /usr/share/perl/5.26 -- PERL_EXTRA_C_FLAGS = -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -- PerlEmbed_ARCHNAME = x86_64-linux-gnu-thread-multi -- PerlEmbed_CCFLAGS = -D_REENTRANT;-D_GNU_SOURCE;-DDEBIAN;-fwrapv;-fno-strict-aliasing;-pipe;-I/usr/local/include;-D_LARGEFILE_SOURCE;-D_FILE_OFFSET_BITS=64 -- PerlEmbed_CCCDLFLAGS = -fPIC -- LD = x86_64-linux-gnu-gcc -- PerlEmbed_LDFLAGS = -Wl,-E;-fstack-protector-strong;-L/usr/local/lib;-L/usr/lib/x86_64-linux-gnu/perl/5.26/CORE;-lperl;-ldl;-lm;-lpthread;-lc;-lcrypt -- PerlEmbed_LDDLFLAGS = -shared;-L/usr/local/lib;-fstack-protector-strong -- Boost version: 1.65.1 -- Found the following Boost libraries: -- system -- filesystem -- thread -- log -- locale -- chrono -- date_time -- atomic -- log_setup -- regex -- Configuring done -- Generating done -- Build files have been written to: /home/maggie/Slic3r/build maggie@maggie-VirtualBox:~/Slic3r/build$ export PERL5LIB=/home/maggie/Slic3r/build maggie@maggie-VirtualBox:~/Slic3r/build$ make [ 2%] Built target BSpline [ 8%] Built target poly2tri [ 11%] Built target clipper [ 72%] Built target libslic3r [ 80%] Built target admesh [ 83%] Built target libslic3r_gui [ 85%] Built target ZipArchive [ 87%] Built target polypartition [ 90%] Built target nowide [ 91%] Building CXX object xs/CMakeFiles/XS.dir/src/libslic3r/utils.cpp.o [ 92%] Building CXX object xs/CMakeFiles/XS.dir/src/slic3r/GUI/wxPerlIface.cpp.o [ 93%] Building CXX object xs/CMakeFiles/XS.dir/src/perlglue.cpp.o [ 94%] Linking CXX shared library XS.so CMakeFiles/XS.dir/XS.cpp.o: file not recognized: File truncated collect2: error: ld returned 1 exit status xs/CMakeFiles/XS.dir/build.make:243: recipe for target 'xs/XS.so' failed make[2]: ** [xs/XS.so] Error 1 CMakeFiles/Makefile2:150: recipe for target 'xs/CMakeFiles/XS.dir/all' failed make[1]: [xs/CMakeFiles/XS.dir/all] Error 2 Makefile:140: recipe for target 'all' failed make: * [all] Error 2

Is this a new feature request? Related guides for writing feature requests: http://meta.stackexchange.com/a/259196 http://nickohrn.com/2013/09/write-great-feature-request-bug-report/

STL/Config (.ZIP) where problem occurs

Upload a zipped copy of an STL and your config (File -> Export Config)

Zip-o-mat commented 4 years ago

Try export PERL5LIB=/home/maggie/Slic3r/local-lib/lib/perl5

maggiefannick commented 4 years ago

I tried this several times before and got an error here every time as well. Here's the code:

maggie@maggie-VirtualBox:~$ cd Slic3r maggie@maggie-VirtualBox:~/Slic3r$ cd build maggie@maggie-VirtualBox:~/Slic3r/build$ cmake .. PATH: /home/maggie/Slic3r/local-lib/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin PERL5LIB: /home/maggie/Slic3r/local-lib/lib/perl: Slic3r will be built with GUI support -- PERL_INCLUDE_PATH = /usr/lib/x86_64-linux-gnu/perl/5.26/CORE -- PERL_LIBRARY = /usr/lib/x86_64-linux-gnu/libperl.so.5.26 -- PERL_EXECUTABLE = /usr/bin/perl -- PERL_SITESEARCH = UNKNOWN -- PERL_SITELIB = /usr/local/share/perl/5.26.1 -- PERL_VENDORARCH = /usr/lib/x86_64-linux-gnu/perl5/5.26 -- PERL_VENDORLIB = /usr/share/perl5 -- PERL_ARCHLIB = /usr/lib/x86_64-linux-gnu/perl/5.26 -- PERL_PRIVLIB = /usr/share/perl/5.26 -- PERL_EXTRA_C_FLAGS = -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -- PerlEmbed_ARCHNAME = x86_64-linux-gnu-thread-multi -- PerlEmbed_CCFLAGS = -D_REENTRANT;-D_GNU_SOURCE;-DDEBIAN;-fwrapv;-fno-strict-aliasing;-pipe;-I/usr/local/include;-D_LARGEFILE_SOURCE;-D_FILE_OFFSET_BITS=64 -- PerlEmbed_CCCDLFLAGS = -fPIC -- LD = x86_64-linux-gnu-gcc -- PerlEmbed_LDFLAGS = -Wl,-E;-fstack-protector-strong;-L/usr/local/lib;-L/usr/lib/x86_64-linux-gnu/perl/5.26/CORE;-lperl;-ldl;-lm;-lpthread;-lc;-lcrypt -- PerlEmbed_LDDLFLAGS = -shared;-L/usr/local/lib;-fstack-protector-strong -- Boost version: 1.65.1 -- Found the following Boost libraries: -- system -- filesystem -- thread -- log -- locale -- chrono -- date_time -- atomic -- log_setup -- regex -- Configuring done -- Generating done -- Build files have been written to: /home/maggie/Slic3r/build maggie@maggie-VirtualBox:~/Slic3r/build$ export PERL5LIB=/home/maggie/Slic3r/local-lib/lib/perl5 maggie@maggie-VirtualBox:~/Slic3r/build$ make [ 2%] Built target BSpline [ 8%] Built target poly2tri [ 11%] Built target clipper [ 72%] Built target libslic3r [ 80%] Built target admesh [ 83%] Built target libslic3r_gui [ 85%] Built target ZipArchive [ 87%] Built target polypartition [ 90%] Built target nowide [ 91%] Building CXX object xs/CMakeFiles/XS.dir/src/libslic3r/utils.cpp.o [ 92%] Building CXX object xs/CMakeFiles/XS.dir/src/slic3r/GUI/wxPerlIface.cpp.o [ 93%] Building CXX object xs/CMakeFiles/XS.dir/src/perlglue.cpp.o [ 94%] Linking CXX shared library XS.so CMakeFiles/XS.dir/XS.cpp.o: file not recognized: File truncated collect2: error: ld returned 1 exit status xs/CMakeFiles/XS.dir/build.make:243: recipe for target 'xs/XS.so' failed make[2]: [xs/XS.so] Error 1 CMakeFiles/Makefile2:150: recipe for target 'xs/CMakeFiles/XS.dir/all' failed make[1]: [xs/CMakeFiles/XS.dir/all] Error 2 Makefile:140: recipe for target 'all' failed make: *** [all] Error 2

Zip-o-mat commented 4 years ago

Sorry for my late answer. I cannot reproduce your problem. Have you installed all dependencies, both

sudo apt-get install gcc cmake build-essential libgtk2.0-dev libwxgtk3.0-dev libwx-perl libmodule-build-perl git cpanminus libextutils-cppguess-perl libboost-all-dev libxmu-dev liblocal-lib-perl wx-common libopengl-perl libwx-glcanvas-perl libtbb-dev libxmu-dev freeglut3-dev libwxgtk-media3.0-dev libboost-thread-dev libboost-system-dev libboost-filesystem-dev libcurl4-openssl-dev libextutils-makemaker-cpanfile-perl

and

sudo apt-get install libextutils-typemaps-default-perl libextutils-xspp-perl libextutils-typemap-perl

?

maggiefannick commented 4 years ago

Yes, I've copied and pasted every line up to the point where I get the error.

Zip-o-mat commented 4 years ago

Sorry but I can't help you because I cant reproduce the error and I have no idea how to solve this. Maybe you can try a different Linux version I use Ubuntu 18.04 and it works there.

Zip-o-mat commented 4 years ago

or you try my current work in progress branch:

$ git clone https://github.com/Zip-o-mat/Slic3r.git
$ cd Slic3r
$ git checkout -b origin/nonplanar-master-merge

And build with the following instructions:

$ export LDLOADLIBS=-lstdc++
$ perl Build.PL
$ perl Build.PL --gui
maggiefannick commented 4 years ago

I am using Ubuntu 18.04 as well. Can't seem to get it to work. Thanks for the help anyway.

Markowia commented 4 years ago

Hello @maggiefannick, I was on the same boat as you until now. It was stopping and stopping again and again on 97% with the same error. Then I switched to WLS and did a try there. Surprisingly it was successfull and the Slic3r started but was cursed with bad performance. So I switched back to Ubuntu 18.04 virtual machine and replicaring the same steps i succeeded comppiling Slic3r (disclaimer: I am not a programmer and have very little experiance with Linux). This is what I did:

Actual solution after the borring introduction:

  1. completely remove the folder /Slic3r, if you need - use rm -rf dirname

  2. Open the terminal and before you begin all the steps overagain make yourself a super user permanently (or whatever it means) with: sudo su. Imput your user password and then...

  3. repeat all the steps as described in the main page https://github.com/Zip-o-mat/Slic3r/tree/nonplanar

I made myself an account in GitHub specialy to try give a solution to this mutual problem, i hope it will be helpful. Please share if you try it.

Stay safe and happy compiling :) P.S.: Don't change any printer setting after the initial setup, just turn on the non-planar option under printer settings (Ctrl+1) and give it 45 degree and 7.5 mm for example.