search

ZsTizy / heekscnc

Automatically exported from code.google.com/p/heekscnc
Other
0 stars 0 forks source link

backplot of drilling cycle movement is drawn incorrectly. #363

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Add a couple points
2. Create a drilling operation for them.  Set properties as appropriate
3. post-process and inspect the backplot.

set 
start depth 0
final depth -10
clearance. 5
rapid safety 1
max stepdown 5

produces gcode like:
Z5
G83 Q5 G98 X6.255 Y20.279 Z-10 R1 F10000

According to linuxcnc documentation, it should peck and retract to 1 and then 
rapid 5 after the first hole.  Then rapid horizontally at 5 to the second 
location.

looking at the backplot, the horizontal rapid appears to be at 1.  Loading the 
same gcode in linuxcnc shows it at 5.

http://i.imgur.com/lgCuMJA.png

This isn't a major problem but is misleading the user about how the tool will 
actually move.

Original issue reported on code.google.com by shopinth...@gmail.com on 4 Feb 2015 at 1:26