刷机后屏显wifi没了,也找不到zm1开头的wifi

[leadlxx]

使用JLINK刷机,看日志应该是刷成功了,但是wifi没了 ========================dest_address_loc= 507904 target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x61000000 pc: 0x1000b8ca msp: 0x1003efc4 ** Result: OK target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x61000000 pc: 0x1000b8ca msp: 0x1003efc4 target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x61000000 pc: 0x1000b8c8 msp: 0x1003efc4 ** Result: OK Warn : Only resetting the Cortex-M core, use a reset-init event handler to reset any peripherals or configure hardware srst support. target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x00000100 msp: 0x1003effc Warn : Only resetting the Cortex-M core, use a reset-init event handler to reset any peripherals or configure hardware srst support. target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x00000100 msp: 0x1003effc 40824 bytes written at address 0x10005000 downloaded 40824 bytes in 0.742491s (53.694 KiB/s) entry_address= 268483069 stack_address= 268693500 buffer_size= 16384 pc (/32): 0x1000B9FD sp (/32): 0x1003EFFC Total write size is 0 to partition 3 target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x61000000 pc: 0x1000b8c8 msp: 0x1003efc4 target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x61000000 pc: 0x1000b972 msp: 0x1003efc4 ** Result: OK Warn : Only resetting the Cortex-M core, use a reset-init event handler to reset any peripherals or configure hardware srst support. shutdown command invoked

[mmkkllpp]

同样的问题，楼主搞定了吗，我的也是刷机找不到热点，WiFi图标也不亮，烧录窗口不是一闪而过，应该是刷成功的

[a2633063]

重刷 确认固件放入正确

[mmkkllpp]

我搞定了，不要刷最新版，最新版只有ota固件，不是完整的

[a2633063]

我搞定了，不要刷最新版，最新版只有ota固件，不是完整的

最新版本已经补充all.bin文件供线刷.

注意:请仔细查看文档确认刷机文件的使用

[leadlxx]

用all.bin文件就可以刷新,已成功接入到HA