a5826995 / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega
0 stars 0 forks source link

Enhancement request #621

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
Hello,
Actually, I would like to ask.
1. About waypoints. How many actually one can set? It is written about APM2 - 
"Can support hundreds of 3D waypoints". So the number is endless?
1a. Change of a waypoint (the waypoints) during flight. Is it possible?
2. What about the feature "Autonomous takeoff, landing ...". I would like to 
launch my UAV and forget about it untill mission complete and than find it 
somewhere at the point of return. Possible?
2a. Feature "... and special action commands such as video and camera controls" 
what kind of commands and how my camera could be connected with APM2? I would 
like to use APM2 for aerial photography and further post-processing 
(orthophoto). Does the autopilot suit it?
3. What is the radio for the APM2 to control? Is it "Ardupilot Mega Xbee 
Telemetry Kit 2.4Ghz". Is that the only option or the APM 2 could be integrated 
with the other

Original issue reported on code.google.com by george.r...@gmail.com on 3 May 2012 at 9:00

GoogleCodeExporter commented 8 years ago
Hello;

Please find my comments, embedded in your main message below;

1. About waypoints. How many actually one can set? It is written about APM2 - 
"Can support hundreds of 3D waypoints". So the number is endless?
Rana>>>It can not be endless, will depend on the EEPROM size.

1a. Change of a waypoint (the waypoints) during flight. Is it possible?
Rana>>>Yes you can change the waypoint in flight. In the present waypoint, I 
have observed that excluding the current waypoint (A waypoint toward which the 
plane is currently heading) rest all waypoints get updated and the Arduplane 
modifies its flight path accordingly.

2. What about the feature "Autonomous takeoff, landing ...". I would like to 
launch my UAV and forget about it untill mission complete and than find it 
somewhere at the point of return. Possible?
Rana>>>Autonomous take off and landing are supported by Arduplane 2.33 and some 
of recent versions. I have observed in flight simulation that a point at which 
I selected the Arduplane to land, throtel certainly gets cut but plane keeps on 
gliding  powerless upto appreciable long distance, which is certainly not 
desirable. So you have to be careful on selecting a set of waypoints, which are 
only responsible to make your plane touch down withing your desired area, based 
on the surrounding of your flying ground. I hop you got it.

2a. Feature "... and special action commands such as video and camera controls" 
what kind of commands and how my camera could be connected with APM2? I would 
like to use APM2 for aerial photography and further post-processing 
(orthophoto). Does the autopilot suit it?
Rana>>>Ooops ! You seems to be not familiar with the manual / Wiki pages of the 
Arduplane, and started writing all of your desires as feature enhancement. 
Please go through the manual / wiki pages of Arduplane.

3. What is the radio for the APM2 to control? Is it "Ardupilot Mega Xbee 
Telemetry Kit 2.4Ghz". Is that the only option or the APM 2 could be integrated 
with the other
Rana>>>Arduplane supports lots of Telemetry Radios including X-Bee. Please 
refer to my comment of your point "2a"

Original comment by narpat...@gmail.com on 4 May 2012 at 6:04

GoogleCodeExporter commented 8 years ago
Hi
thanks a lot! Very helpful. And sorry for 
However, about 2a (camera control) ... as far as I understood the autopilot is 
not suited for the triggering in a distance (between waypionts) (or I have 
failed to find appropriate information) - for aerial mappring. Right? (You said 
"... and started writing all of your desires as feature enhancement").
That is, actually, also confirmed by a number of recent posts from APM2 users 
who struggle to use APM2 for aerial mapping.
But I found people who somehow adjusted AMP2 for mapping (stooting in a 
distance etc.) with APM2. This guys are 
http://www.event38.com/ProductDetails.asp?ProductCode=E382
They claim that there is APM2 only.
What could be a solution. Just give me a hint, please.
Thanks.

Original comment by george.r...@gmail.com on 4 May 2012 at 8:25