search

aagallag / hid_gadget_test

Linux USB HID Gadget Test Application
http://aagallag.com/hid_gadget_test/
GNU General Public License v3.0
54 stars 22 forks source link

/dev/hidg0: Invalid argument #3

Open Aljumaili85 opened 6 years ago

Aljumaili85 commented 6 years ago

Hi Aagallag, I was following your answers on the discussion here : https://bbs.nextthing.co/t/using-usb-otg-to-act-like-a-keyboard/769/11 I manged to hack the hid.c on my system , every thing went well and now the host is read my board as HID gadget ( which is fine ) but I want to use the hid_gadget_test app to send some keystroke to my host . unfortunately I get this error [ /dev/hidg0: Invalid argument ] after I enter my key combination + enter

I appreciate any suggestion

Aljumaili85 commented 6 years ago

just an update , its perfectly work on Linux , the problem above is only when I connect it to MS Windows

aagallag commented 6 years ago

Can you provide the full output when running the hid_gadget_test? Also, are there any errors showing up in dmesg with regards to HID Gadget?

Aljumaili85 commented 6 years ago

sure,

1) dmesg output

//////////////////////////// after Running the gadget /////////////////////////////

[ 207.682916] [sw_udc]: [sw_usb_udc]: binding gadget driver 'g_hid' [ 207.687750] [sw_udc]: alloc request: ep(0xc07f5d58, ep0, 64), req(0xeea241c0) [ 207.702464] [sw_udc]: alloc request: ep(0xc07f5da4, ep1-bulk, 64), req(0xee4f1f80) [ 207.714056] g_hid gadget: HID Gadget, version: 2010/03/16 [ 207.722503] g_hid gadget: g_hid ready

[ 207.784889] [sw_udc]: IRQ: suspend [ 207.787022] [sw_udc]: ERR: usb speed is unkown [ 207.901021] [sw_udc]: IRQ: reset [ 207.902980] [sw_udc]: irq: reset happen, throw away all urb [ 207.991123] [sw_udc]: [ 207.994713] +++++++++++++++++++++++++++++++++++++ [ 207.995604] [sw_udc]: usb enter full speed. [ 207.998587] [sw_udc]: [ 208.002161] +++++++++++++++++++++++++++++++++++++ [ 208.008129] retire_capture_urb: 43 callbacks suppressed [ 208.014357] [sw_udc]: IRQ: reset [ 208.016303] [sw_udc]: irq: reset happen, throw away all urb [ 208.094947] [sw_udc]: Set address 24

////////////////////////// after start using the test application ///////////////

[ 422.287745] WRN:L2385(drivers/usb/sunxi_usb/udc/sw_udc.c):ERR: sw_udc_queue: inval 2 [ 422.295851] g_hid gadget: usb_ep_queue error on int endpoint 4294967274

2) Test application terminal :

/dev/hidg0: Invalid argument

aagallag commented 6 years ago

[ 422.287745] WRN:L2385(drivers/usb/sunxi_usb/udc/sw_udc.c):ERR: sw_udc_queue: inval 2

Look like this is the line of code that's failing: https://github.com/linux-sunxi/linux-sunxi/blob/sunxi-3.4/drivers/usb/sunxi_usb/udc/sw_udc.c#L2385

Not sure if this is a bug in the Linux Sunxi kernel or a bug with hid_gadget_test (or maybe the HID gadget module).

Perhaps the USB flow on Windows is different than on Linux. I would like to see a usbcapture of both when it's working on Linux and when it's failing with Windows. I'll try and find my CHIP this weekend and capture the USB traffic if you are not able to provide this.

Aljumaili85 commented 6 years ago

Thank you, I would like to stop by this point : do you think it should work with Windows ? or maybe its implementation support only Linux (maybe macOS too) . because , for example, here they provide some Windows INF file to support the multifunction composite gadget but I couldn’t find anything about HID gadget so I assumed it should work .