Open clambert24 opened 3 weeks ago
I have some things you can perform documented in the wiki
https://github.com/aaronwmorris/indi-allsky/wiki/Memory-Optimizations
Yup that sorted it, thank you. Got it down to 30%
Ok, so my problem wasn't resolved.
Turned out my pi 3B had an issue and kept shutting down/hanging after about 30 minutes.
Found a spare pi 4 so had to re install everything from scratch is I thi k I messed up the swap file issue and didn't know how to solv it.
I'm back up running again on a pi4 with a 64mb sd card, but still have a 100% full swap file.
I'm not sure exactly how to fix that or exactly what to type/do.
When the swap is full, can you provide the output of ./misc/support_info.sh
?
it was 100% earlier, but now its 98%. hopefully this gives you an idea.
/home/admin/indi-allsky/misc/support_info.sh: line 61: warning: command substitution: ignored null byte in input #################################
#################################
Distribution: debian
Release: 12
Arch: aarch64
Bits: 64
CPUs: 4
Memory: 1891248 kB
System: Raspberry Pi 4 Model B Rev 1.5
Linux raspberrypi 6.6.31+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux
Time
Fri 14 Jun 18:48:28 BST 2024
System timezone
Europe/London
Uptime
18:48:28 up 19:26, 2 users, load average: 0.39, 0.42, 0.37
Memory
total used free shared buff/cache available
Mem: 1891248 990484 257564 84932 797928 900764
Swap: 204796 201688 3108
Filesystems
Filesystem 1K-blocks Used Available Use% Mounted on
udev 672452 0 672452 0% /dev
tmpfs 189128 1412 187716 1% /run
/dev/mmcblk0p2 60801648 13733240 43960056 24% /
tmpfs 945624 584 945040 1% /dev/shm
tmpfs 5120 16 5104 1% /run/lock
/dev/mmcblk0p1 522230 76402 445828 15% /boot/firmware
tmpfs 189124 40 189084 1% /run/user/1000
sysctl info
vm.swappiness = 60
system python: Python 3.11.2
indiserver: /usr/local/bin/indiserver
IP Info
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether d8:3a:dd:26:a6:9d brd ff:ff:ff:ff:ff:ff
inet 192.168.0.86/24 brd 192.168.0.255 scope global dynamic noprefixroute eth0
valid_lft 59652sec preferred_lft 59652sec
inet6 fe80::70be:dec7:e0a4:233b/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether d8:3a:dd:26:a6:9e brd ff:ff:ff:ff:ff:ff
inet 192.168.0.176/24 brd 192.168.0.255 scope global dynamic noprefixroute wlan0
valid_lft 59666sec preferred_lft 59666sec
inet6 fe80::450f:ad5c:2244:4447/64 scope link noprefixroute
valid_lft forever preferred_lft forever
User info
uid=1000(admin) gid=1000(admin) groups=1000(admin),4(adm),20(dialout),24(cdrom),27(sudo),29(audio),44(video),46(plugdev),60(games),100(users),102(input),105(render),106(netdev),115(lpadmin),993(gpio),994(i2c),995(spi),999(systemd-journal)
Process info
admin 1089 0.1 0.0 9488 1152 ? Ss Jun13 1:39 /usr/local/bin/indiserver -p 7624 indi_simulator_telescope indi_simulator_ccd
admin 1109 0.0 0.1 41236 2176 ? S Jun13 1:07 indi_simulator_telescope
admin 1110 0.0 0.0 123340 1536 ? Sl Jun13 0:52 indi_simulator_ccd
admin 2104 0.0 0.7 33392 15104 ? SNs Jun13 0:14 /home/admin/indi-allsky/virtualenv/indi-allsky/bin/python3 /home/admin/indi-allsky/virtualenv/indi-allsky/bin/gunicorn --config /etc/indi-allsky/gunicorn.conf.py indi_allsky.wsgi
admin 2121 0.0 9.5 891096 179952 ? SNl Jun13 0:41 /home/admin/indi-allsky/virtualenv/indi-allsky/bin/python3 /home/admin/indi-allsky/virtualenv/indi-allsky/bin/gunicorn --config /etc/indi-allsky/gunicorn.conf.py indi_allsky.wsgi
admin 2130 0.0 4.3 653988 82976 ? SNsl Jun13 0:44 /home/admin/indi-allsky/virtualenv/indi-allsky/bin/python3 allsky.py --log syslog run
admin 2134 0.3 4.0 565812 77204 ? Sl Jun13 3:42 /home/admin/indi-allsky/virtualenv/indi-allsky/bin/python3 allsky.py --log syslog run
admin 2136 12.5 13.6 742376 258324 ? Sl Jun13 145:31 /home/admin/indi-allsky/virtualenv/indi-allsky/bin/python3 allsky.py --log syslog run
admin 2137 0.7 10.0 657228 189608 ? SNl Jun13 9:10 /home/admin/indi-allsky/virtualenv/indi-allsky/bin/python3 allsky.py --log syslog run
admin 32287 0.3 0.1 6800 2944 ? SN 18:48 0:00 /bin/bash /home/admin/indi-allsky/misc/support_info.sh
USB info
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 4037:2804 2.4G Composite Devic
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
USB Permissions
123 0 drwxr-xr-x 4 root root 80 Jan 1 1970 /dev/bus/usb
124 0 drwxr-xr-x 2 root root 100 Jan 1 1970 /dev/bus/usb/001
125 0 crw-rw-r-- 1 root root 189, 0 Jun 13 23:12 /dev/bus/usb/001/001
142 0 crw-rw-r-- 1 root root 189, 1 Jun 13 23:12 /dev/bus/usb/001/002
271 0 crw-rw-r-- 1 root root 189, 2 Jun 13 23:12 /dev/bus/usb/001/003
126 0 drwxr-xr-x 2 root root 60 Jan 1 1970 /dev/bus/usb/002
127 0 crw-rw-r-- 1 root root 189, 128 Jun 13 23:12 /dev/bus/usb/002/001
video device Permissions
crw-rw----+ 1 root video 81, 14 Jun 13 23:12 /dev/video0
crw-rw----+ 1 root video 81, 15 Jun 13 23:12 /dev/video1
crw-rw----+ 1 root video 81, 8 Jun 13 23:12 /dev/video10
crw-rw----+ 1 root video 81, 9 Jun 13 23:12 /dev/video11
crw-rw----+ 1 root video 81, 11 Jun 13 23:12 /dev/video12
crw-rw----+ 1 root video 81, 0 Jun 13 23:12 /dev/video13
crw-rw----+ 1 root video 81, 1 Jun 13 23:12 /dev/video14
crw-rw----+ 1 root video 81, 2 Jun 13 23:12 /dev/video15
crw-rw----+ 1 root video 81, 3 Jun 13 23:12 /dev/video16
crw-rw----+ 1 root video 81, 12 Jun 13 23:12 /dev/video18
crw-rw----+ 1 root video 81, 4 Jun 13 23:12 /dev/video19
crw-rw----+ 1 root video 81, 5 Jun 13 23:12 /dev/video20
crw-rw----+ 1 root video 81, 6 Jun 13 23:12 /dev/video21
crw-rw----+ 1 root video 81, 7 Jun 13 23:12 /dev/video22
crw-rw----+ 1 root video 81, 10 Jun 13 23:12 /dev/video23
crw-rw----+ 1 root video 81, 13 Jun 13 23:12 /dev/video31
v4l info
bcm2835-codec-decode (platform:bcm2835-codec):
/dev/video10
/dev/video11
/dev/video12
/dev/video18
/dev/video31
/dev/media4
bcm2835-isp (platform:bcm2835-isp):
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video20
/dev/video21
/dev/video22
/dev/video23
/dev/media0
/dev/media3
unicam (platform:fe801000.csi):
/dev/video0
/dev/video1
/dev/media2
rpivid (platform:rpivid):
/dev/video19
/dev/media1
Module info
Module Size Used by
rfcomm 53248 4
snd_seq_dummy 12288 0
snd_hrtimer 12288 1
snd_seq 81920 7 snd_seq_dummy
snd_seq_device 16384 1 snd_seq
cmac 12288 3
algif_hash 12288 1
aes_arm64 12288 3
aes_generic 32768 1 aes_arm64
algif_skcipher 12288 1
af_alg 28672 6 algif_hash,algif_skcipher
bnep 24576 2
brcmfmac_wcc 12288 0
brcmfmac 348160 1 brcmfmac_wcc
hci_uart 49152 0
btbcm 24576 1 hci_uart
brcmutil 24576 1 brcmfmac
bluetooth 606208 33 hci_uart,btbcm,bnep,rfcomm
cfg80211 995328 1 brcmfmac
imx477 24576 3
raspberrypi_hwmon 12288 0
binfmt_misc 16384 1
joydev 24576 0
ecdh_generic 16384 2 bluetooth
ecc 36864 1 ecdh_generic
bcm2835_unicam 49152 8
rfkill 32768 6 bluetooth,cfg80211
bcm2835_codec 45056 0
rpivid_hevc 45056 0
bcm2835_isp 28672 10
bcm2835_v4l2 40960 0
v4l2_dv_timings 40960 1 bcm2835_unicam
v4l2_mem2mem 53248 2 bcm2835_codec,rpivid_hevc
v4l2_fwnode 20480 2 imx477,bcm2835_unicam
libaes 12288 3 aes_arm64,bluetooth,aes_generic
bcm2835_mmal_vchiq 36864 3 bcm2835_codec,bcm2835_v4l2,bcm2835_isp
v4l2_async 20480 3 v4l2_fwnode,imx477,bcm2835_unicam
videobuf2_vmalloc 12288 1 bcm2835_v4l2
videobuf2_dma_contig 20480 4 bcm2835_codec,bcm2835_unicam,rpivid_hevc,bcm2835_isp
videobuf2_memops 12288 2 videobuf2_vmalloc,videobuf2_dma_contig
videobuf2_v4l2 32768 6 bcm2835_codec,bcm2835_unicam,bcm2835_v4l2,rpivid_hevc,v4l2_mem2mem,bcm2835_isp
snd_bcm2835 24576 1
videodev 319488 24 v4l2_async,bcm2835_codec,v4l2_fwnode,videobuf2_v4l2,imx477,bcm2835_unicam,bcm2835_v4l2,rpivid_hevc,v4l2_mem2mem,bcm2835_isp
vc_sm_cma 28672 2 bcm2835_mmal_vchiq,bcm2835_isp
raspberrypi_gpiomem 12288 0
videobuf2_common 73728 10 bcm2835_codec,videobuf2_vmalloc,videobuf2_dma_contig,videobuf2_v4l2,bcm2835_unicam,bcm2835_v4l2,rpivid_hevc,v4l2_mem2mem,videobuf2_memops,bcm2835_isp
mc 65536 14 v4l2_async,videodev,bcm2835_codec,videobuf2_v4l2,imx477,bcm2835_unicam,videobuf2_common,rpivid_hevc,v4l2_mem2mem,bcm2835_isp
nvmem_rmem 12288 0
uio_pdrv_genirq 12288 0
uio 20480 1 uio_pdrv_genirq
fuse 139264 5
i2c_dev 16384 0
dm_mod 143360 0
ip_tables 32768 0
x_tables 57344 1 ip_tables
ipv6 573440 58
vc4 372736 17
snd_soc_hdmi_codec 20480 2
drm_display_helper 16384 1 vc4
v3d 90112 8
cec 53248 1 vc4
drm_dma_helper 24576 3 vc4
gpu_sched 53248 1 v3d
drm_kms_helper 233472 2 drm_dma_helper,vc4
drm_shmem_helper 24576 1 v3d
drm 688128 18 gpu_sched,drm_kms_helper,drm_dma_helper,v3d,vc4,drm_shmem_helper,drm_display_helper
snd_soc_core 307200 2 vc4,snd_soc_hdmi_codec
drm_panel_orientation_quirks 24576 1 drm
i2c_mux_pinctrl 12288 0
snd_compress 20480 1 snd_soc_core
i2c_mux 12288 1 i2c_mux_pinctrl
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_pcm 151552 5 snd_bcm2835,snd_soc_hdmi_codec,snd_compress,snd_soc_core,snd_pcm_dmaengine
i2c_brcmstb 12288 0
i2c_bcm2835 16384 1
snd_timer 36864 3 snd_seq,snd_hrtimer,snd_pcm
snd 122880 14 snd_seq,snd_seq_device,snd_bcm2835,snd_soc_hdmi_codec,snd_timer,snd_compress,snd_soc_core,snd_pcm
backlight 24576 2 drm_kms_helper,drm
git status
On branch main
Your branch is up to date with 'origin/main'.
nothing to commit, working tree clean
git log
commit cea15e9891fe9e29c8a01cf9b138b28156f80dfc
Merge: d8d2bb9d 010dca14
Author: Aaron W Morris <aaron@aarmor.net>
Date: Thu Jun 13 14:30:05 2024 -0400
Merge pull request #1320 from aaronwmorris/dev
add BH1750 light sensors support
indi version: 2.0.7
indi packages
indi connections
LISTEN 0 5 0.0.0.0:7624 0.0.0.0:*
ESTAB 0 0 127.0.0.1:7624 127.0.0.1:53944
ESTAB 0 0 127.0.0.1:53944 127.0.0.1:7624
Detected indi properties
looking for *.*.*
Connected to localhost on port 7624
Queried properties from *
CCD Simulator.CCD_SIMULATE_CRASH is write-only
Telescope Simulator.MOUNT_TYPE is write-only
Telescope Simulator.SIM_PIER_SIDE is write-only
Telescope Simulator.MOUNT_MODEL is write-only
Telescope Simulator.FLIP_HA is write-only
CCD Simulator.CONNECTION.CONNECT=Off
CCD Simulator.CONNECTION.DISCONNECT=On
CCD Simulator.DRIVER_INFO.DRIVER_NAME=CCD Simulator
CCD Simulator.DRIVER_INFO.DRIVER_EXEC=indi_simulator_ccd
CCD Simulator.DRIVER_INFO.DRIVER_VERSION=1.0
CCD Simulator.DRIVER_INFO.DRIVER_INTERFACE=22
CCD Simulator.POLLING_PERIOD.PERIOD_MS=1000
CCD Simulator.DEBUG.ENABLE=Off
CCD Simulator.DEBUG.DISABLE=On
CCD Simulator.CONFIG_PROCESS.CONFIG_LOAD=Off
CCD Simulator.CONFIG_PROCESS.CONFIG_SAVE=Off
CCD Simulator.CONFIG_PROCESS.CONFIG_DEFAULT=Off
CCD Simulator.CONFIG_PROCESS.CONFIG_PURGE=Off
CCD Simulator.ACTIVE_DEVICES.ACTIVE_TELESCOPE=Telescope Simulator
CCD Simulator.ACTIVE_DEVICES.ACTIVE_ROTATOR=Rotator Simulator
CCD Simulator.ACTIVE_DEVICES.ACTIVE_FOCUSER=Focuser Simulator
CCD Simulator.ACTIVE_DEVICES.ACTIVE_FILTER=CCD Simulator
CCD Simulator.ACTIVE_DEVICES.ACTIVE_SKYQUALITY=SQM
Telescope Simulator.CONNECTION.CONNECT=On
Telescope Simulator.CONNECTION.DISCONNECT=Off
CCD Simulator.SIMULATOR_SETTINGS.SIM_XRES=1280
CCD Simulator.SIMULATOR_SETTINGS.SIM_YRES=1024
CCD Simulator.SIMULATOR_SETTINGS.SIM_XSIZE=5.2000000000000001776
CCD Simulator.SIMULATOR_SETTINGS.SIM_YSIZE=5.2000000000000001776
CCD Simulator.SIMULATOR_SETTINGS.SIM_MAXVAL=65000
CCD Simulator.SIMULATOR_SETTINGS.SIM_SATURATION=1
CCD Simulator.SIMULATOR_SETTINGS.SIM_LIMITINGMAG=17
CCD Simulator.SIMULATOR_SETTINGS.SIM_NOISE=10
CCD Simulator.SIMULATOR_SETTINGS.SIM_SKYGLOW=19.5
CCD Simulator.SIMULATOR_SETTINGS.SIM_OAGOFFSET=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_POLAR=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_POLARDRIFT=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_PEPERIOD=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_PEMAX=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_TIME_FACTOR=1
CCD Simulator.SIMULATOR_SETTINGS.SIM_ROTATION=0
Telescope Simulator.DRIVER_INFO.DRIVER_NAME=Telescope Simulator
Telescope Simulator.DRIVER_INFO.DRIVER_EXEC=indi_simulator_telescope
Telescope Simulator.DRIVER_INFO.DRIVER_VERSION=1.0
Telescope Simulator.DRIVER_INFO.DRIVER_INTERFACE=5
Telescope Simulator.POLLING_PERIOD.PERIOD_MS=250
Telescope Simulator.DEBUG.ENABLE=Off
Telescope Simulator.DEBUG.DISABLE=On
Telescope Simulator.CONFIG_PROCESS.CONFIG_LOAD=Off
Telescope Simulator.CONFIG_PROCESS.CONFIG_SAVE=Off
Telescope Simulator.CONFIG_PROCESS.CONFIG_DEFAULT=Off
Telescope Simulator.CONFIG_PROCESS.CONFIG_PURGE=Off
Telescope Simulator.CONNECTION_MODE.CONNECTION_SERIAL=On
Telescope Simulator.CONNECTION_MODE.CONNECTION_TCP=Off
Telescope Simulator.DEVICE_PORT.PORT=/dev/ttyUSB0
Telescope Simulator.DEVICE_BAUD_RATE.9600=On
Telescope Simulator.DEVICE_BAUD_RATE.19200=Off
Telescope Simulator.DEVICE_BAUD_RATE.38400=Off
Telescope Simulator.DEVICE_BAUD_RATE.57600=Off
Telescope Simulator.DEVICE_BAUD_RATE.115200=Off
Telescope Simulator.DEVICE_BAUD_RATE.230400=Off
Telescope Simulator.DEVICE_AUTO_SEARCH.INDI_ENABLED=On
Telescope Simulator.DEVICE_AUTO_SEARCH.INDI_DISABLED=Off
Telescope Simulator.DEVICE_PORT_SCAN.Scan Ports=Off
Telescope Simulator.ACTIVE_DEVICES.ACTIVE_GPS=GPS Simulator
Telescope Simulator.ACTIVE_DEVICES.ACTIVE_DOME=Dome Simulator
CCD Simulator.EQUATORIAL_PE.RA_PE=0
CCD Simulator.EQUATORIAL_PE.DEC_PE=0
CCD Simulator.SIM_FOCUSING.SIM_FOCUS_POSITION=36700
CCD Simulator.SIM_FOCUSING.SIM_FOCUS_MAX=100000
CCD Simulator.SIM_FOCUSING.SIM_SEEING=3.5
CCD Simulator.SIMULATE_BAYER.INDI_ENABLED=Off
CCD Simulator.SIMULATE_BAYER.INDI_DISABLED=On
CCD Simulator.ACTIVE_DEVICES.ACTIVE_TELESCOPE=Telescope Simulator
CCD Simulator.ACTIVE_DEVICES.ACTIVE_ROTATOR=Rotator Simulator
CCD Simulator.ACTIVE_DEVICES.ACTIVE_FOCUSER=Focuser Simulator
CCD Simulator.ACTIVE_DEVICES.ACTIVE_FILTER=CCD Simulator
CCD Simulator.ACTIVE_DEVICES.ACTIVE_SKYQUALITY=SQM
Telescope Simulator.DOME_POLICY.DOME_IGNORED=On
Telescope Simulator.DOME_POLICY.DOME_LOCKS=Off
Telescope Simulator.MOUNT_AXES.PRIMARY=2.420600509367432096e-05
Telescope Simulator.MOUNT_AXES.SECONDARY=52.700001000000007423
Telescope Simulator.ON_COORD_SET.TRACK=On
Telescope Simulator.ON_COORD_SET.SLEW=Off
Telescope Simulator.ON_COORD_SET.SYNC=Off
Telescope Simulator.EQUATORIAL_EOD_COORD.RA=11.34669146464111833
Telescope Simulator.EQCCD Simulator.CCD_SIMULATE_CRASH is write-only
Telescope Simulator.MOUNT_TYPE is write-only
Telescope Simulator.SIM_PIER_SIDE is write-only
Telescope Simulator.MOUNT_MODEL is write-only
UATORIAL_EOD_COORD.DEC=52.700000762939453125
Telescope Simulator.TELESCOPE_ABORT_MOTION.ABORT=Off
Telescope Simulator.TELESCOPE_TRACK_MODE.TRACK_SIDEREAL=On
Telescope Simulator.TELESCOPE_TRACK_MODE.TRACK_SOLAR=Off
Telescope Simulator.TELESCOPE_TRACK_MODE.TRACK_LUNAR=Off
Telescope Simulator.TELESCOPE_TRACK_MODE.TRACK_CUSTOM=Off
Telescope Simulator.TELESCOPE_TRACK_STATE.TRACK_ON=Off
Telescope Simulator.TELESCOPE_TRACK_STATE.TRACK_OFF=On
Telescope Simulator.TELESCOPE_TRACK_RATE.TRACK_RATE_RA=15.04106717867020393
Telescope Simulator.TELESCOPE_TRACK_RATE.TRACK_RATE_DE=0
Telescope Simulator.TELESCOPE_MOTION_NS.MOTION_NORTH=Off
Telescope Simulator.TELESCOPE_MOTION_NS.MOTION_SOUTH=Off
Telescope Simulator.TELESCOPE_MOTION_WE.MOTION_WEST=Off
Telescope Simulator.TELESCOPE_MOTION_WE.MOTION_EAST=Off
Telescope Simulator.TELESCOPE_REVERSE_MOTION.REVERSE_NS=Off
Telescope Simulator.TELESCOPE_REVERSE_MOTION.REVERSE_WE=Off
Telescope Simulator.TELESCOPE_SLEW_RATE.SLEW_GUIDE=Off
Telescope Simulator.TELESCOPE_SLEW_RATE.SLEW_CENTERING=Off
Telescope Simulator.TELESCOPE_SLEW_RATE.SLEW_FIND=Off
Telescope Simulator.TELESCOPE_SLEW_RATE.SLEW_MAX=On
Telescope Simulator.TARGET_EOD_COORD.RA=0
Telescope Simulator.TARGET_EOD_COORD.DEC=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_XRES=1280
CCD Simulator.SIMULATOR_SETTINGS.SIM_YRES=1024
CCD Simulator.SIMULATOR_SETTINGS.SIM_XSIZE=5.2000000000000001776
CCD Simulator.SIMULATOR_SETTINGS.SIM_YSIZE=5.2000000000000001776
CCD Simulator.SIMULATOR_SETTINGS.SIM_MAXVAL=65000
CCD Simulator.SIMULATOR_SETTINGS.SIM_SATURATION=1
CCD Simulator.SIMULATOR_SETTINGS.SIM_LIMITINGMAG=17
CCD Simulator.SIMULATOR_SETTINGS.SIM_NOISE=10
CCD Simulator.SIMULATOR_SETTINGS.SIM_SKYGLOW=19.5
CCD Simulator.SIMULATOR_SETTINGS.SIM_OAGOFFSET=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_POLAR=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_POLARDRIFT=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_PEPERIOD=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_PEMAX=0
CCD Simulator.SIMULATOR_SETTINGS.SIM_TIME_FACTOR=1
CCD Simulator.SIMULATOR_SETTINGS.SIM_ROTATION=0
CCD Simulator.EQUATORIAL_PE.RA_PE=0
CCD Simulator.EQUATORIAL_PE.DEC_PE=0
CCD Simulator.SIM_FOCUSING.SIM_FOCUS_POSITION=36700
CCD Simulator.SIM_FOCUSING.SIM_FOCUS_MAX=100000
CCD Simulator.SIM_FOCUSING.SIM_SEEING=3.5
CCD Simulator.SIMULATE_BAYER.INDI_ENABLED=Off
CCD Simulator.SIMULATE_BAYER.INDI_DISABLED=On
Telescope Simulator.TIME_UTC.UTC=2024-06-13T22:25:00
Telescope Simulator.TIME_UTC.OFFSET=1.00
Telescope Simulator.GEOGRAPHIC_COORD.LAT=52.700000762939453125
Telescope Simulator.GEOGRAPHIC_COORD.LONG=-0.43999999761581420898
Telescope Simulator.GEOGRAPHIC_COORD.ELEV=0
Telescope Simulator.TELESCOPE_PARK.PARK=On
Telescope Simulator.TELESCOPE_PARK.UNPARK=Off
Telescope Simulator.TELESCOPE_PARK_POSITION.PARK_HA=0
Telescope Simulator.TELESCOPE_PARK_POSITION.PARK_DEC=52.700000762939453125
Telescope Simulator.TELESCOPE_PARK_OPTION.PARK_CURRENT=Off
Telescope Simulator.TELESCOPE_PARK_OPTION.PARK_DEFAULT=Off
Telescope Simulator.TELESCOPE_PARK_OPTION.PARK_WRITE_DATA=Off
Telescope Simulator.TELESCOPE_PARK_OPTION.PARK_PURGE_DATA=Off
Telescope Simulator.USEJOYSTICK.ENABLE=Off
Telescope Simulator.USEJOYSTICK.DISABLE=On
Telescope Simulator.SNOOP_JOYSTICK.SNOOP_JOYSTICK_DEVICE=Joystick
Telescope Simulator.TELESCOPE_TIMED_GUIDE_NS.TIMED_GUIDE_N=0
Telescope Simulator.TELESCOPE_TIMED_GUIDE_NS.TIMED_GUIDE_S=0
Telescope Simulator.TELESCOPE_TIMED_GUIDE_WE.TIMED_GUIDE_W=0
Telescope Simulator.TELESCOPE_TIMED_GUIDE_WE.TIMED_GUIDE_E=0
Telescope Simulator.GUIDE_RATE.GUIDE_RATE_WE=0.5
Telescope Simulator.GUIDE_RATE.GUIDE_RATE_NS=0.5
Telescope Simulator.TELESCOPE_HOME.FIND=Off
Telescope Simulator.TELESCOPE_HOME.SET=Off
Telescope Simulator.TELESCOPE_HOME.GO=Off
Telescope Simulator.ACTIVE_DEVICES.ACTIVE_GPS=GPS Simulator
Telescope Simulator.ACTIVE_DEVICES.ACTIVE_DOME=Dome Simulator
Telescope Simulator.DOME_POLICY.DOME_IGNORED=On
Telescope Simulator.DOME_POLICY.DOME_LOCKS=Off
Telescope Simulator.USEJOYSTICK.ENABLE=Off
Telescope Simulator.USEJOYSTICK.DISABLE=On
Telescope Simulator.SNOOP_JOYSTICK.SNOOP_JOYSTICK_DEVICE=Joystick
Telescope Simulator.MOUNT_AXES.PRIMARY=Telescope Simulator.FLIP_HA is write-only
2.420600509367432096e-05
Telescope Simulator.MOUNT_AXES.SECONDARY=52.700001000000007423
libcamera: not detected
libcamera packages
ii libcamera-ipa:arm64 0.2.0+rpt20240418-1 arm64 complex camera support library (IPA modules)
ii libcamera-tools 0.2.0+rpt20240418-1 arm64 complex camera support library (tools)
ii libcamera0.2:arm64 0.2.0+rpt20240418-1 arm64 complex camera support library
ii pipewire-libcamera:arm64 0.3.65-3+rpt7+deb12u1 arm64 PipeWire libcamera plugin
ii python3-libcamera:arm64 0.2.0+rpt20240418-1 arm64 complex camera support library (Python bindings)
libcamera cameras
rpicam-hello: /usr/bin/rpicam-hello
Available cameras
-----------------
0 : imx477 [4056x3040 12-bit RGGB] (/base/soc/i2c0mux/i2c@1/imx477@1a)
Modes: 'SRGGB10_CSI2P' : 1332x990 [120.05 fps - (696, 528)/2664x1980 crop]
'SRGGB12_CSI2P' : 2028x1080 [50.03 fps - (0, 440)/4056x2160 crop]
2028x1520 [40.01 fps - (0, 0)/4056x3040 crop]
4056x3040 [10.00 fps - (0, 0)/4056x3040 crop]
python packages
ii libpython3-dev:arm64 3.11.2-1+b1 arm64 header files and a static library for Python (default)
ii libpython3-stdlib:arm64 3.11.2-1+b1 arm64 interactive high-level object-oriented language (default python3 version)
ii libpython3.11:arm64 3.11.2-6 arm64 Shared Python runtime library (version 3.11)
ii libpython3.11-dev:arm64 3.11.2-6 arm64 Header files and a static library for Python (v3.11)
ii libpython3.11-minimal:arm64 3.11.2-6 arm64 Minimal subset of the Python language (version 3.11)
ii libpython3.11-stdlib:arm64 3.11.2-6 arm64 Interactive high-level object-oriented language (standard library, version 3.11)
ii python-apt-common 2.6.0 all Python interface to libapt-pkg (locales)
ii python-babel-localedata 2.10.3-1 all tools for internationalizing Python applications - locale data files
ii python-is-python3 3.11.1-3 all symlinks /usr/bin/python to python3
ii python3 3.11.2-1+b1 arm64 interactive high-level object-oriented language (default python3 version)
ii python3-apt 2.6.0 arm64 Python 3 interface to libapt-pkg
ii python3-asgiref 3.6.0-1 all ASGI in-memory channel layer (Python3 version)
ii python3-astroid 2.14.2-1 all rebuild a new abstract syntax tree from Python's AST (Python3)
ii python3-asttokens 2.2.1-1 all annotate Python asbtract syntax trees with code references (Python 3)
ii python3-av 10.0.0-1+rpt4 arm64 pythonic bindings for FFmpeg's libraries
ii python3-babel 2.10.3-1 all tools for internationalizing Python applications - Python 3.x
ii python3-blinker 1.5-1 all Fast, simple object-to-object and broadcast signaling (Python3)
ii python3-bs4 4.11.2-2 all error-tolerant HTML parser for Python 3
ii python3-cairo:arm64 1.20.1-5+b1 arm64 Python3 bindings for the Cairo vector graphics library
ii python3-certifi 2022.9.24-1 all root certificates for validating SSL certs and verifying TLS hosts (python3)
ii python3-cffi-backend:arm64 1.15.1-5+b1 arm64 Foreign Function Interface for Python 3 calling C code - runtime
ii python3-chardet 5.1.0+dfsg-2 all Universal Character Encoding Detector (Python3)
ii python3-charset-normalizer 3.0.1-2 all charset, encoding and language detection (Python 3)
ii python3-click 8.1.3-2 all Wrapper around optparse for command line utilities - Python 3.x
ii python3-colorama 0.4.6-2 all Cross-platform colored terminal text in Python - Python 3.x
ii python3-colorzero 2.0-2 all Construct, convert, and manipulate colors in a Pythonic manner.
ii python3-cryptography 38.0.4-3 arm64 Python library exposing cryptographic recipes and primitives (Python 3)
ii python3-cups:arm64 2.0.1-5+b4 arm64 Python3 bindings for CUPS
ii python3-cupshelpers 1.5.18-1 all Python utility modules around the CUPS printing system
ii python3-dbus 1.3.2-4+b1 arm64 simple interprocess messaging system (Python 3 interface)
ii python3-debconf 1.5.82 all interact with debconf from Python 3
ii python3-dev 3.11.2-1+b1 arm64 header files and a static library for Python (default)
ii python3-dill 0.3.6-1 all Serialize all of Python 3 (almost)
ii python3-distlib 0.3.6-1 all low-level components of python distutils2/packaging
ii python3-distro 1.8.0-1 all Linux OS platform information API
ii python3-distutils 3.11.2-3 all distutils package for Python 3.x
ii python3-docutils 0.19+dfsg-6 all text processing system for reStructuredText (implemented in Python 3)
ii python3-dotenv 0.21.0-1 all Get and set values in the .env file in local and production servers
ii python3-filelock 3.9.0-1 all platform independent file locking module
ii python3-flask 2.2.2-3 all micro web framework based on Werkzeug and Jinja2 - Python 3.x
ii python3-gi 3.42.2-3+b1 arm64 Python 3 bindings for gobject-introspection libraries
ii python3-gi-cairo 3.42.2-3+b1 arm64 Python 3 Cairo bindings for the GObject library
ii python3-gpiozero 2.0-1 all Simple API for controlling devices attached to a Pi's GPIO pins
ii python3-html5lib 1.1-3 all HTML parser/tokenizer based on the WHATWG HTML5 specification
ii python3-idna 3.3-1 all Python IDNA2008 (RFC 5891) handling (Python 3)
ii python3-importlib-metadata 4.12.0-1 all library to access the metadata for a Python package - Python 3.x
ii python3-isort 5.6.4-1 all library for sorting Python imports (Python 3)
ii python3-itsdangerous 2.1.2-3 all Various helpers to pass trusted data to untrusted environment - Python 3.x
ii python3-jedi 0.18.2-1 all autocompletion tool for Python 3
ii python3-jinja2 3.1.2-1 all small but fast and easy to use stand-alone template engine
ii python3-jwt 2.6.0-1 all Python 3 implementation of JSON Web Token
ii python3-kms++ 0~git20231115~065257+9ae90ce-1 arm64 C++ library for kernel mode setting - python3 bindings
ii python3-lazy-object-proxy 1.9.0-1+b1 arm64 Python 3 fast and thorough lazy object proxy
ii python3-lgpio 0.2.2-1~rpt1 arm64 Control GPIO pins via gpiochip devices - python3 bindings
ii python3-lib2to3 3.11.2-3 all Interactive high-level object-oriented language (lib2to3)
ii python3-libcamera:arm64 0.2.0+rpt20240418-1 arm64 complex camera support library (Python bindings)
ii python3-libevdev 0.5-3 all Python 3 wrapper for libevdev
ii python3-libgpiod:arm64 1.6.3-1+b3 arm64 Python bindings for libgpiod (Python 3)
ii python3-logilab-common 1.9.8-1 all useful miscellaneous modules used by Logilab projects (Python3)
ii python3-lxml:arm64 4.9.2-1+b1 arm64 pythonic binding for the libxml2 and libxslt libraries
ii python3-markupsafe 2.1.2-1+b1 arm64 HTML/XHTML/XML string library
ii python3-mccabe 0.7.0-1 all Python code complexity checker (Python 3)
ii python3-minimal 3.11.2-1+b1 arm64 minimal subset of the Python language (default python3 version)
ii python3-more-itertools 8.10.0-2 all library with routines for operating on iterables, beyond itertools (Python 3)
ii python3-mypy 1.0.1-1 arm64 public modules for mypy (Python 3)
ii python3-mypy-extensions 0.4.3-4 all Experimental type system extensions for mypy typechecker (Python 3)
ii python3-numpy 1:1.24.2-1 arm64 Fast array facility to the Python 3 language
ii python3-oauthlib 3.2.2-1 all generic, spec-compliant implementation of OAuth for Python3
ii python3-olefile 0.46-3 all Python module to read/write MS OLE2 files
ii python3-opengl 3.1.6+dfsg-3 all Python bindings to OpenGL (Python 3)
ii python3-openssl 23.0.0-1 all Python 3 wrapper around the OpenSSL library
ii python3-parso 0.8.3-1 all Python parser that supports error recovery - Python 3.X
ii python3-pexpect 4.8.0-4 all Python 3 module for automating interactive applications
ii python3-pgzero 1.2.post4+dfsg-2 all Zero-boilerplate games programming framework based on Pygame (Python 3)
ii python3-picamera2 0.3.18-1 all Libcamera based python library
ii python3-pidng 4.0.9-1+bookworm arm64 Create Adobe DNG RAW files using Python (Python 3)
ii python3-piexif 1.1.3-2 all pure-Python EXIF manipulation library
ii python3-pigpio 1.79-1+rpt1 all Python module which talks to the pigpio daemon (Python 3)
ii python3-pil:arm64 9.4.0-1.1+deb12u1 arm64 Python Imaging Library (Python3)
ii python3-pip 23.0.1+dfsg-1+rpt1 all Python package installer
ii python3-pip-whl 23.0.1+dfsg-1+rpt1 all Python package installer (pip wheel)
ii python3-pkg-resources 66.1.1-1 all Package Discovery and Resource Access using pkg_resources
ii python3-platformdirs 2.6.0-1 all determining appropriate platform-specific directories (Python 3)
ii python3-prctl 1.8.1-1+b2 arm64 Python interface to the prctl() syscall (Python 3)
ii python3-psutil 5.9.4-1+b1 arm64 module providing convenience functions for managing processes (Python3)
ii python3-ptyprocess 0.7.0-5 all Run a subprocess in a pseudo terminal from Python 3
ii python3-pycryptodome 3.11.0+dfsg1-4 arm64 cryptographic Python library (Python 3)
ii python3-pygame 2.1.2+dfsg-5+b1 arm64 SDL bindings for games development (Python 3)
ii python3-pygments 2.14.0+dfsg-1 all syntax highlighting package written in Python 3
ii python3-pyinotify 0.9.6-2 all simple Linux inotify Python bindings
ii python3-pyqt5 5.15.9+dfsg-1 arm64 Python 3 bindings for Qt5
ii python3-pyqt5.sip 12.11.1-1 arm64 runtime module for Python extensions using SIP
ii python3-pyudev 0.24.0-1 all Python3 bindings for libudev
ii python3-renderpm:arm64 3.6.12-1+b1 arm64 python low level render interface
ii python3-reportlab 3.6.12-1 all ReportLab library to create PDF documents using Python3
ii python3-reportlab-accel:arm64 3.6.12-1+b1 arm64 C coded extension accelerator for the ReportLab Toolkit
ii python3-requests 2.28.1+dfsg-1 all elegant and simple HTTP library for Python3, built for human beings
ii python3-requests-oauthlib 1.3.0+ds-1 all module providing OAuthlib auth support for requests (Python 3)
ii python3-responses 0.18.0-1 all Utility library for mocking out the requests Python 3 library
ii python3-roman 3.3-3 all module for generating/analyzing Roman numerals for Python 3
ii python3-rpi.gpio 0.7.1~a4-1+b4 arm64 Module to control Raspberry Pi GPIO channels (Python 3)
ii python3-rtimulib 7.2.1-6+bookworm arm64 Versatile C++ and Python 9-dof, 10-dof and 11-dof IMU library (Python 3)
ii python3-send2trash 1.8.1~b0-2 all Python module for sending file to trash natively
ii python3-sense-hat 2.6.0-1 all Sense HAT python library (Python 3)
ii python3-serial 3.5-1.1 all pyserial - module encapsulating access for the serial port
ii python3-setuptools 66.1.1-1 all Python3 Distutils Enhancements
ii python3-setuptools-whl 66.1.1-1 all Python Distutils Enhancements (wheel package)
ii python3-simplejpeg 1.6.6-1 arm64 Simple package for fast JPEG encoding and decoding
ii python3-simplejson 3.18.3-1 arm64 simple, fast, extensible JSON encoder/decoder for Python 3.x
ii python3-six 1.16.0-4 all Python 2 and 3 compatibility library
ii python3-smbc 1.0.23-2+b4 arm64 Python 3 bindings for the Samba client library
ii python3-smbus:arm64 4.3-2+b3 arm64 Python 3 bindings for Linux SMBus access through i2c-dev
ii python3-smbus2 0.4.2-1 arm64 another pure Python implementation of the python-smbus package
ii python3-soupsieve 2.3.2-1 all modern CSS selector implementation for BeautifulSoup (Python 3)
ii python3-spidev 20200602~200721-1+bookworm arm64 Bindings for Linux SPI access through spidev (Python 3)
ii python3-tk:arm64 3.11.2-3 arm64 Tkinter - Writing Tk applications with Python 3.x
ii python3-toml 0.10.2-1 all library for Tom's Obvious, Minimal Language - Python 3.x
ii python3-tomlkit 0.11.7-1 all style-preserving TOML library for Python
ii python3-twython 3.8.2+dfsg-2 all Pure Python3 wrapper for the Twitter API
ii python3-typeshed 0.0~git20221107.4f381af-1 all collection of library stubs for Python, with static types
ii python3-typing-extensions 4.4.0-1 all Backported and Experimental Type Hints for Python
ii python3-tz 2022.7.1-4 all Python3 version of the Olson timezone database
ii python3-urllib3 1.26.12-1 all HTTP library with thread-safe connection pooling for Python3
ii python3-v4l2 0.3.3-1 all Python bindings for the v4l2 userspace api
ii python3-venv 3.11.2-1+b1 arm64 venv module for python3 (default python3 version)
ii python3-virtualenv 20.17.1+ds-1 all Python virtual environment creator
ii python3-webencodings 0.5.1-5 all Python implementation of the WHATWG Encoding standard
ii python3-werkzeug 2.2.2-3 all collection of utilities for WSGI applications (Python 3.x)
ii python3-wheel 0.38.4-2 all built-package format for Python
ii python3-wheel-whl 0.38.4-2 all built-package format for Python (wheel wheel)
ii python3-wrapt 1.14.1-2+b2 arm64 decorators, wrappers and monkey patching. - Python 3.x
ii python3-yaml 6.0-3+b2 arm64 YAML parser and emitter for Python3
ii python3-zipp 1.0.0-6 all pathlib-compatible Zipfile object wrapper - Python 3.x
ii python3.11 3.11.2-6 arm64 Interactive high-level object-oriented language (version 3.11)
ii python3.11-dev 3.11.2-6 arm64 Header files and a static library for Python (v3.11)
ii python3.11-minimal 3.11.2-6 arm64 Minimal subset of the Python language (version 3.11)
ii python3.11-venv 3.11.2-6 arm64 Interactive high-level object-oriented language (pyvenv binary, version 3.11)
Detected indi-allsky virtualenv
virtualenv python: Python 3.11.2
virtualenv PATH: /home/admin/indi-allsky/virtualenv/indi-allsky/bin:/usr/local/bin:/usr/bin:/bin
flask command: /home/admin/indi-allsky/virtualenv/indi-allsky/bin/flask
virtualenv python modules
alembic==1.13.1
apache-libcloud==3.8.0
argon2-cffi==23.1.0
argon2-cffi-bindings==21.2.0
asciitree==0.3.3
astroalign==2.5.1
astropy==6.1.0
astropy-iers-data==0.2024.6.10.0.30.47
astropy_healpix==1.0.3
astroscrappy==1.2.0
bcrypt==4.1.3
blinker==1.8.2
boto3==1.34.126
botocore==1.34.126
Bottleneck==1.3.8
cachetools==5.3.3
ccdproc==2.4.2
certifi==2024.6.2
cffi==1.16.0
charset-normalizer==3.3.2
click==8.1.7
cloudpickle==3.0.0
cryptography==42.0.8
Cython==3.0.10
dask==2024.5.2
dbus-python==1.3.2
ephem==4.1.5
fasteners==0.19
fish2pano==0.4.1
Flask==3.0.3
Flask-Login==0.6.3
Flask-Migrate==4.0.7
Flask-SQLAlchemy==3.1.1
Flask-WTF==1.2.1
fsspec==2024.6.0
google-api-core==2.19.0
google-api-python-client==2.133.0
google-auth==2.30.0
google-auth-httplib2==0.2.0
google-auth-oauthlib==1.2.0
google-cloud-core==2.4.1
google-cloud-storage==2.17.0
google-crc32c==1.5.0
google-resumable-media==2.7.1
googleapis-common-protos==1.63.1
greenlet==3.0.3
gunicorn==22.0.0
httplib2==0.22.0
idna==3.7
imageio==2.34.1
imageio-ffmpeg==0.5.1
importlib_metadata==7.1.0
inotify==0.2.10
is-safe-url==1.0
itsdangerous==2.2.0
Jinja2==3.1.4
jmespath==1.0.1
lazy_loader==0.4
locket==1.0.0
lxml==5.2.2
Mako==1.3.5
MarkupSafe==2.1.5
mysql-connector-python==8.4.0
networkx==3.3
nose==1.3.7
numcodecs==0.12.1
numpy==1.26.4
oauthlib==3.2.2
opencv-python-headless==4.10.0.82
packaging==24.1
paho-mqtt==2.1.0
paramiko==3.4.0
partd==1.4.2
passlib==1.7.4
piexif==1.1.3
pillow==10.3.0
prettytable==3.10.0
proto-plus==1.23.0
protobuf==4.25.3
psutil==5.9.8
pyasn1==0.6.0
pyasn1_modules==0.4.0
pycparser==2.22
pycurl==7.45.3
pyerfa==2.0.1.4
pygifsicle==1.0.7
pyindi-client @ git+https://github.com/indilib/pyindi-client.git@6f8fa8042f60f7b3079f6d66a0b8ee720af09d64
PyMySQL==1.1.1
PyNaCl==1.5.0
pyparsing==3.1.2
python-dateutil==2.9.0.post0
PyYAML==6.0.1
rawpy==0.21.0
reproject==0.13.1
requests==2.32.3
requests-oauthlib==2.0.0
requests-toolbelt==1.0.0
rsa==4.9
s3transfer==0.10.1
scikit-image==0.23.2
scipy==1.13.1
semantic-version==2.10.0
sep==1.2.1
setuptools-rust==1.9.0
shapely==2.0.4
six==1.16.0
SQLAlchemy==2.0.30
support-developer==1.0.5
tifffile==2024.5.22
toolz==0.12.1
typing_extensions==4.12.2
uritemplate==4.1.1
urllib3==2.2.1
wcwidth==0.2.13
Werkzeug==3.0.3
WTForms==3.1.2
zarr==2.18.2
zipp==3.19.2
indi-allsky config (passwords redacted) 2024-06-14 18:48:40,836 [INFO] MainProcess config._dump() [919]: Dumping config
{
"ENCRYPT_PASSWORDS_comment": "Do not manually adjust",
"ENCRYPT_PASSWORDS": false,
"CAMERA_INTERFACE": "libcamera_imx477",
"INDI_SERVER": "localhost",
"INDI_PORT": 7624,
"INDI_CAMERA_NAME": "",
"OWNER": "Chris Lambert",
"LENS_NAME": "AllSky Lens",
"LENS_FOCAL_LENGTH": 2.5,
"LENS_FOCAL_RATIO": 2,
"LENS_IMAGE_CIRCLE": 4000,
"LENS_ALTITUDE": 90,
"LENS_AZIMUTH": 0,
"CCD_CONFIG": {
"NIGHT": {
"GAIN": 100,
"BINNING": 1
},
"MOONMODE": {
"GAIN": 75,
"BINNING": 1
},
"DAY": {
"GAIN": 20,
"BINNING": 1
}
},
"INDI_CONFIG_DEFAULTS": {
"SWITCHES": {},
"PROPERTIES": {},
"TEXT": {}
},
"INDI_CONFIG_DAY": {},
"CCD_EXPOSURE_MAX": 30,
"CCD_EXPOSURE_DEF": 0,
"CCD_EXPOSURE_MIN": 0,
"CCD_EXPOSURE_MIN_DAY": 0,
"CCD_BIT_DEPTH": 0,
"EXPOSURE_PERIOD": 30,
"EXPOSURE_PERIOD_DAY": 30,
"FOCUS_MODE": false,
"FOCUS_DELAY": 4,
"CFA_PATTERN": "BGGR",
"SCNR_ALGORITHM": "average_neutral",
"WBR_FACTOR": 1,
"WBG_FACTOR": 1,
"WBB_FACTOR": 1,
"AUTO_WB": false,
"SATURATION_FACTOR": 1,
"CCD_COOLING": false,
"CCD_TEMP": 15,
"TEMP_DISPLAY": "c",
"PRESSURE_DISPLAY": "hPa",
"CCD_TEMP_SCRIPT": "",
"GPS_ENABLE": false,
"TARGET_ADU": 75,
"TARGET_ADU_DAY": 75,
"TARGET_ADU_DEV": 10,
"TARGET_ADU_DEV_DAY": 20,
"ADU_ROI": [],
"ADU_FOV_DIV": 4,
"DETECT_STARS": true,
"DETECT_STARS_THOLD": 0.6,
"DETECT_METEORS": false,
"DETECT_MASK": "",
"DETECT_DRAW": false,
"LOGO_OVERLAY": "",
"SQM_ROI": [],
"SQM_FOV_DIV": 4,
"LOCATION_NAME": "Carlby",
"LOCATION_LATITUDE": 53,
"LOCATION_LONGITUDE": -0,
"LOCATION_ELEVATION": 35,
"TIMELAPSE_ENABLE": true,
"TIMELAPSE_SKIP_FRAMES": 4,
"DAYTIME_CAPTURE": true,
"DAYTIME_TIMELAPSE": true,
"DAYTIME_CONTRAST_ENHANCE": false,
"NIGHT_CONTRAST_ENHANCE": false,
"CONTRAST_ENHANCE_16BIT": false,
"CLAHE_CLIPLIMIT": 3,
"CLAHE_GRIDSIZE": 8,
"NIGHT_SUN_ALT_DEG": -6,
"NIGHT_MOONMODE_ALT_DEG": 0,
"NIGHT_MOONMODE_PHASE": 33,
"WEB_NONLOCAL_IMAGES": false,
"WEB_LOCAL_IMAGES_ADMIN": false,
"WEB_EXTRA_TEXT": "",
"WEB_STATUS_TEMPLATE": "Status: {status:s}\nLat: {latitude:0.1f}/Long: {longitude:0.1f}\nSidereal: {sidereal_time:s}\nMode: {mode:s}\nSun: {sun_alt:0.1f}° {sun_dir:s}\nMoon: {moon_alt:0.1f}° {moon_dir:s}\nPhase: {moon_phase_str:s} <span data-bs-toggle=\"tooltip\" data-bs-placement=\"right\" title=\"{moon_phase:0.0f}%\">{moon_glyph:s}</span>\nSmoke: {smoke_rating:s} {smoke_rating_status}\nKp-index: {kpindex:0.2f} {kpindex_rating:s} {kpindex_trend:s} {kpindex_status:s}\nAurora: {ovation_max:d}% {ovation_max_status}",
"HEALTHCHECK": {
"DISK_USAGE": 90,
"SWAP_USAGE": 90
},
"IMAGE_STRETCH": {
"MODE1_ENABLE": false,
"MODE1_GAMMA": 3,
"MODE1_STDDEVS": 2.25,
"SPLIT": false,
"MOONMODE": false,
"DAYTIME": false
},
"KEOGRAM_ANGLE": 0,
"KEOGRAM_H_SCALE": 100,
"KEOGRAM_V_SCALE": 33,
"KEOGRAM_CROP_TOP": 0,
"KEOGRAM_CROP_BOTTOM": 0,
"KEOGRAM_LABEL": true,
"STARTRAILS_MAX_ADU": 65,
"STARTRAILS_MASK_THOLD": 190,
"STARTRAILS_PIXEL_THOLD": 1,
"STARTRAILS_MIN_STARS": 0,
"STARTRAILS_TIMELAPSE": true,
"STARTRAILS_TIMELAPSE_MINFRAMES": 250,
"STARTRAILS_SUN_ALT_THOLD": -15,
"STARTRAILS_MOONMODE_THOLD": true,
"STARTRAILS_MOON_ALT_THOLD": 91,
"STARTRAILS_MOON_PHASE_THOLD": 101,
"STARTRAILS_USE_DB_DATA": true,
"IMAGE_CALIBRATE_DARK": true,
"IMAGE_EXIF_PRIVACY": false,
"IMAGE_FILE_TYPE": "jpg",
"IMAGE_FILE_COMPRESSION": {
"jpg": 90,
"png": 5,
"tif": 5,
"jpeg": 90
},
"IMAGE_FOLDER": "/var/www/html/allsky/images",
"IMAGE_LABEL_TEMPLATE": "# size:60 [Use 60 for higher resolution cameras]\n# xy:-30,30 (Upper Right)\n# anchor:ra (Right Justified)\n# color:150,0,0\n{timestamp:%d.%m.%Y %H:%M:%S}\n# color:100,100,0\nLat {latitude:0.0f} Long {longitude:0.0f}\n# color:150,150,150\nTiangong {tiangong_up:s} [{tiangong_next_h:0.1f}h/{tiangong_next_alt:0.0f}°]\nHubble {hst_up:s} [{hst_next_h:0.1f}h/{hst_next_alt:0.0f}°]\nISS {iss_up:s} [{iss_next_h:0.1f}h/{iss_next_alt:0.0f}°]\n# xy:-15,-450 (Lower Right) [Use -15,-450 for size 60]\n# color:175,175,0\nSun {sun_alt:0.0f}°\n# color:125,0,0\nMercury {mercury_alt:0.0f}°\n# color:100,150,150\nVenus {venus_alt:0.0f}°\n# color:150,0,0\nMars {mars_alt:0.0f}°\n# color:100,100,0\nJupiter {jupiter_alt:0.0f}°\n# color:100,100,150\nSaturn {saturn_alt:0.0f}°\n# color:150,150,150\nMoon {moon_phase:0.0f}% {moon_alt:0.0f}°\n# xy:15,-210 (Lower Left) [Use 15,-210 for size 60]\n# anchor:la (Left Justified)\n# color:0,150,150\nStars {stars:d}\n# color:150,50,50\nKp-index {kpindex:0.2f}\n# color:150,150,150\nSmoke {smoke_rating:s}\n# xy:30,30 (Upper Left)\n# color:0,150,0\nExposure {exposure:0.6f}\n# color:150,50,0\nGain {gain:d}\n# color:50,50,150\nTemp {temp:0.1f}°{temp_unit:s}\n# color:150,0,150\nStretch {stretch:s}\nStacking {stack_method:s}\n# color:200,200,200 (default color)\n# additional labels will be added here\n{sensor_temp_10:0.1f}",
"URL_TEMPLATE": "https://{bucket}.s3.{region}.{host}",
"IMAGE_EXTRA_TEXT": "",
"IMAGE_CROP_ROI": [],
"IMAGE_ROTATE": "",
"IMAGE_ROTATE_ANGLE": 0,
"IMAGE_FLIP_V": true,
"IMAGE_FLIP_H": true,
"IMAGE_SCALE": 100,
"NIGHT_GRAYSCALE": false,
"DAYTIME_GRAYSCALE": false,
"IMAGE_CIRCLE_MASK": {
"ENABLE": false,
"DIAMETER": 1500,
"OFFSET_X": 0,
"OFFSET_Y": 0,
"BLUR": 35,
"OPACITY": 100,
"OUTLINE": false
},
"FISH2PANO": {
"ENABLE": false,
"DIAMETER": 3000,
"OFFSET_X": 0,
"OFFSET_Y": 0,
"ROTATE_ANGLE": -90,
"SCALE": 0.5,
"MODULUS": 2,
"FLIP_H": false,
"ENABLE_CARDINAL_DIRS": true,
"DIRS_OFFSET_BOTTOM": 25,
"OPENCV_FONT_SCALE": 0.8,
"PIL_FONT_SIZE": 30
},
"IMAGE_SAVE_FITS": false,
"IMAGE_SAVE_FITS_PRE_DARK": false,
"IMAGE_EXPORT_RAW": "",
"IMAGE_EXPORT_FOLDER": "/var/www/html/allsky/images/export",
"IMAGE_EXPORT_FLIP_V": false,
"IMAGE_EXPORT_FLIP_H": false,
"IMAGE_STACK_METHOD": "maximum",
"IMAGE_STACK_COUNT": 1,
"IMAGE_STACK_ALIGN": false,
"IMAGE_ALIGN_DETECTSIGMA": 5,
"IMAGE_ALIGN_POINTS": 50,
"IMAGE_ALIGN_SOURCEMINAREA": 10,
"IMAGE_STACK_SPLIT": false,
"THUMBNAILS": {
"IMAGES_AUTO": true
},
"IMAGE_EXPIRE_DAYS": 30,
"TIMELAPSE_EXPIRE_DAYS": 365,
"IMAGE_QUEUE_MAX": 3,
"IMAGE_QUEUE_MIN": 1,
"IMAGE_QUEUE_BACKOFF": 0.5,
"FFMPEG_FRAMERATE": 35,
"FFMPEG_BITRATE": "20000k",
"FFMPEG_VFSCALE": "",
"FFMPEG_CODEC": "libx264",
"FFMPEG_EXTRA_OPTIONS": "",
"FITSHEADERS": [
[
"INSTRUME",
"indi-allsky"
],
[
"OBSERVER",
""
],
[
"SITE",
""
],
[
"OBJECT",
""
],
[
"NOTES",
""
]
],
"IMAGE_LABEL_SYSTEM": "pillow",
"TEXT_PROPERTIES": {
"DATE_FORMAT": "%Y%m%d %H:%M:%S",
"FONT_FACE": "FONT_HERSHEY_SIMPLEX",
"FONT_AA": "LINE_AA",
"FONT_SCALE": 0.8,
"FONT_THICKNESS": 1,
"FONT_OUTLINE": true,
"FONT_HEIGHT": 30,
"FONT_X": 30,
"FONT_Y": 30,
"FONT_COLOR": [
200,
200,
200
],
"PIL_FONT_FILE": "fonts-freefont-ttf/FreeMonoBold.ttf",
"PIL_FONT_CUSTOM": "",
"PIL_FONT_SIZE": 60
},
"CARDINAL_DIRS": {
"ENABLE": true,
"FONT_COLOR": [
255,
0,
0
],
"SWAP_NS": false,
"SWAP_EW": false,
"CHAR_NORTH": "N",
"CHAR_EAST": "E",
"CHAR WEST": "W",
"CHAR_SOUTH": "S",
"DIAMETER": 4000,
"OFFSET_X": 0,
"OFFSET_Y": 0,
"OFFSET_TOP": 15,
"OFFSET_LEFT": 15,
"OFFSET_RIGHT": 15,
"OFFSET_BOTTOM": 15,
"OPENCV_FONT_SCALE": 0.5,
"PIL_FONT_SIZE": 20,
"OUTLINE_CIRCLE": false,
"CHAR_WEST": "W"
},
"ORB_PROPERTIES": {
"MODE": "ha",
"RADIUS": 9,
"SUN_COLOR": [
200,
200,
0
],
"MOON_COLOR": [
128,
128,
128
],
"AZ_OFFSET": 0,
"RETROGRADE": false
},
"UPLOAD_WORKERS": 2,
"FILETRANSFER": {
"CLASSNAME": "pycurl_sftp",
"HOST": "",
"PORT": 0,
"USERNAME": "",
"PASSWORD": "REDACTED",
"PASSWORD_E": "REDACTED",
"PRIVATE_KEY": "",
"PUBLIC_KEY": "",
"CONNECT_TIMEOUT": 10,
"TIMEOUT": 60,
"CERT_BYPASS": true,
"REMOTE_IMAGE_NAME": "image.{ext}",
"REMOTE_PANORAMA_NAME": "panorama.{ext}",
"REMOTE_IMAGE_FOLDER": "/home/allsky/upload/allsky",
"REMOTE_PANORAMA_FOLDER": "/home/allsky/upload/allsky",
"REMOTE_RAW_FOLDER": "/home/allsky/upload/allsky/export",
"REMOTE_FITS_FOLDER": "/home/allsky/upload/allsky/fits",
"REMOTE_METADATA_NAME": "latest_metadata.json",
"REMOTE_METADATA_FOLDER": "/home/allsky/upload/allsky",
"REMOTE_VIDEO_FOLDER": "/home/allsky/upload/allsky/videos",
"REMOTE_KEOGRAM_FOLDER": "/home/allsky/upload/allsky/keograms",
"REMOTE_STARTRAIL_FOLDER": "/home/allsky/upload/allsky/startrails",
"REMOTE_STARTRAIL_VIDEO_FOLDER": "/home/allsky/upload/allsky/videos",
"REMOTE_PANORAMA_VIDEO_FOLDER": "/home/allsky/upload/allsky/videos",
"REMOTE_ENDOFNIGHT_FOLDER": "/home/allsky/upload/allsky",
"UPLOAD_IMAGE": 0,
"UPLOAD_PANORAMA": 0,
"UPLOAD_RAW": false,
"UPLOAD_FITS": false,
"UPLOAD_METADATA": false,
"UPLOAD_VIDEO": false,
"UPLOAD_KEOGRAM": false,
"UPLOAD_STARTRAIL": false,
"UPLOAD_STARTRAIL_VIDEO": false,
"UPLOAD_PANORAMA_VIDEO": false,
"UPLOAD_ENDOFNIGHT": false,
"LIBCURL_OPTIONS": {}
},
"S3UPLOAD": {
"ENABLE": false,
"CLASSNAME": "boto3_s3",
"ACCESS_KEY": "",
"SECRET_KEY": "REDACTED",
"SECRET_KEY_E": "REDACTED",
"CREDS_FILE": "",
"BUCKET": "change-me",
"REGION": "us-east-2",
"NAMESPACE": "",
"HOST": "amazonaws.com",
"PORT": 0,
"CONNECT_TIMEOUT": 10,
"TIMEOUT": 60,
"URL_TEMPLATE": "https://{bucket}.s3.{region}.{host}",
"ACL": "",
"STORAGE_CLASS": "STANDARD",
"TLS": true,
"CERT_BYPASS": false,
"UPLOAD_FITS": false,
"UPLOAD_RAW": false
},
"MQTTPUBLISH": {
"ENABLE": false,
"TRANSPORT": "tcp",
"HOST": "localhost",
"PORT": 8883,
"USERNAME": "indi-allsky",
"PASSWORD": "REDACTED",
"PASSWORD_E": "REDACTED",
"BASE_TOPIC": "indi-allsky",
"QOS": 0,
"TLS": true,
"CERT_BYPASS": true,
"PUBLISH_IMAGE": true
},
"SYNCAPI": {
"ENABLE": false,
"BASEURL": "https://example.com/indi-allsky",
"USERNAME": "",
"APIKEY": "REDACTED",
"APIKEY_E": "REDACTED",
"CERT_BYPASS": false,
"POST_S3": false,
"EMPTY_FILE": false,
"UPLOAD_IMAGE": 1,
"UPLOAD_PANORAMA": 1,
"CONNECT_TIMEOUT": 10,
"TIMEOUT": 60
},
"YOUTUBE": {
"ENABLE": false,
"SECRETS_FILE": "",
"PRIVACY_STATUS": "private",
"TITLE_TEMPLATE": "Allsky {asset_label} - {day_date:%Y-%m-%d} - {timeofday}",
"DESCRIPTION_TEMPLATE": "",
"CATEGORY": 22,
"TAGS": [
"timelapse",
"allsky",
"astronomy"
],
"UPLOAD_VIDEO": false,
"UPLOAD_STARTRAIL_VIDEO": false,
"UPLOAD_PANORAMA_VIDEO": false
},
"LIBCAMERA": {
"IMAGE_FILE_TYPE": "dng",
"AWB": "auto",
"AWB_DAY": "auto",
"AWB_ENABLE": false,
"AWB_ENABLE_DAY": false,
"EXTRA_OPTIONS": "--tuning-file /usr/share/libcamera/ipa/rpi/vc4/imx477_noir.json",
"EXTRA_OPTIONS_DAY": "--tuning-file /usr/share/libcamera/ipa/rpi/vc4/imx477_noir.json"
},
"PYCURL_CAMERA": {
"URL": "",
"IMAGE_FILE_TYPE": "jpg",
"USERNAME": "",
"PASSWORD": "REDACTED",
"PASSWORD_E": "REDACTED"
},
"FOCUSER": {
"CLASSNAME": "",
"GPIO_PIN_1": "D17",
"GPIO_PIN_2": "D18",
"GPIO_PIN_3": "D27",
"GPIO_PIN_4": "D22"
},
"DEW_HEATER": {
"CLASSNAME": "",
"ENABLE_DAY": false,
"PIN_1": "D12",
"INVERT_OUTPUT": false,
"LEVEL_DEF": 100,
"THOLD_ENABLE ": false,
"MANUAL_TARGET": 0,
"TEMP_USER_VAR_SLOT": 10,
"LEVEL_LOW": 33,
"LEVEL_MED": 66,
"LEVEL_HIGH": 100,
"THOLD_DIFF_LOW": 15,
"THOLD_DIFF_MED": 10,
"THOLD_DIFF_HIGH": 5,
"THOLD_ENABLE": false
},
"FAN": {
"CLASSNAME": "",
"ENABLE_NIGHT": false,
"PIN_1": "D13",
"INVERT_OUTPUT": false,
"LEVEL_DEF": 100,
"THOLD_ENABLE ": false,
"TARGET": 30,
"TEMP_USER_VAR_SLOT": 10,
"LEVEL_LOW": 33,
"LEVEL_MED": 66,
"LEVEL_HIGH": 100,
"THOLD_DIFF_LOW": 0,
"THOLD_DIFF_MED": 5,
"THOLD_DIFF_HIGH": 10,
"THOLD_ENABLE": false
},
"TEMP_SENSOR": {
"A_CLASSNAME": "",
"A_PIN_1": "D5",
"A_USER_VAR_SLOT": 10,
"A_I2C_ADDRESS": "0x77",
"B_CLASSNAME": "",
"B_PIN_1": "D6",
"B_USER_VAR_SLOT": 15,
"B_I2C_ADDRESS": "0x76",
"C_CLASSNAME": "",
"C_PIN_1": "D16",
"C_USER_VAR_SLOT": 20,
"C_I2C_ADDRESS": "0x40",
"OPENWEATHERMAP_APIKEY": "REDACTED",
"OPENWEATHERMAP_APIKEY_E": "REDACTED"
}
}
#################################
#################################
Setting the swappiness kernel setting is a pretty easy thing to keep the swap usage lower, that is on the memory optimizations page.
You probably need to bump up the swap to 512MB as well.
Ok. can you please explain in pure english that a child can understand. sorry but i get very confused on what to type and where.
No worries.
For the swappiness, can copy and paste this directly into your console for the raspberry pi.
echo "vm.swappiness = 1" | sudo tee /etc/sysctl.d/90-swappiness.conf
sudo sysctl --system
For the swap, you can follow these instructions. You do not really need to do this one.
/etc/dphys-swapfile
CONF_SWAPSIZE=512
to increase to 512MB
sudo dphys-swapfile swapoff
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
ok. so i did the top one as you said, and it did something, because now the system is saying i am using 0% swappiness and in the support info it sais iv got 204796 free and zero used. so guessing this will be ok now? i tried the other one you mentioned about increasing swap size, but couldnt work out how to change settings. when i did the sudo setup it just said (want /var/swap=200MByte, checking existing: keeping it)
The default swappiness setting in Linux is 60
which causes the kernel to swap when there is [relatively] low memory "pressure". This is supposedly good for desktop systems and prioritizes keeping memory free for new applications to be run. On a server and an allsky system, you do not really want to keep memory free. It should use all available memory at all times, but not use swap unless it is absolutely necessary.
Setting to 1
allows the kernel to primarily steal memory from file cache instead of swapping to disk.
ok thats great thank you so much for explaining that and helping me. i have set it up now in my garden and shall see what results i have in the morning. thank you.
Ok, this is not good. Thus morning it said timelapse failed to generate and swap memory is back to 100%
Try upgrading to the latest code, just in case.
If you have the GUI running on the Raspi, you may consider turning it off with the following:
systemctl set-default multi-user.target
systemctl isolate multi-user.target
Ok. Decided to re install everything on a new bugger sd card as was running out of storage quickly. Now it's saying memory swap full. What does this mean and hiw to fix it?