search

abgary / aforge

Automatically exported from code.google.com/p/aforge
Other
0 stars 0 forks source link

Two cameras error. With the version 2.0.0 the system works ok, but if I use the new version 2.2.5 I only can see one camera #359

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?

1. Run the sample for Two Cameras version 2.0.0, the program works fine and 
show two cameras. 

If I just run the Sample for Two cameras but using version 2.2.5 for 
Aforge.Video, Aforge.Controls and Aforge.Video.DirectShow the program just 
shows one camera, and the other stays in 0.0 frames, Connecting...

2. I use two Lifecam Studio Cameras, Windows XP 32 bits (virtual VMWare).

What is the expected output? What do you see instead?

I do not know why with the older version I can use the system correctly, but 
with the new version I can not do that.

What version of the product are you using?

2.2.5 vs 2.0.0

Please provide any additional information below.

Original issue reported on code.google.com by luisgs...@gmail.com on 27 Sep 2013 at 8:43

GoogleCodeExporter commented 8 years ago 
I have three cameras in my system, two of type A and one type B. They show up 
as 1: A, 2: A, 3:B. In the test program, selecting 1 & 2 shows video from 
camera1, camera 2 does not connect (as above). Selecting 1 & 3 works. Selecting 
2 & 3 works. So, this only concerns same type cameras.

Original comment by JuhaKuus...@gmail.com on 13 Nov 2013 at 9:31

GoogleCodeExporter commented 8 years ago 
I can confirm this behavior for version 2.2.5. If you connect two cameras of 
the same vendor AND model (they appear with exactly the same name), the second 
camera is not able to connect.

Original comment by georg.we...@gmail.com on 4 Mar 2014 at 8:28

GoogleCodeExporter commented 8 years ago 
Did 2 tests just now. AForge.Video.DirectShow version 2.2.5.

1) Minoru 3D stereo webcam (2 camera basically)
Result: Yes, same name for both left and right camera, but they both play 
together with no issues.

2) 2 ACME cameras (most probably some Chinese noname cameras)
Result: Two cameras of the same model/manufacturer have SAME NAME. BUT! They 
both play fine together.

So it works. So either you provide more details, or debug and find the issue.

Original comment by andrew.k...@gmail.com on 4 Mar 2014 at 10:18

GoogleCodeExporter commented 8 years ago 
I can confirm the issue with version 2.2.5 and the WebCams from Microsoft: 
LifeCam Studio.

I'll be doing some testing with other webcam from noName [HP] (chinese) and let 
you about what I found.

Regards

Original comment by ebrainSh...@gmail.com on 22 Apr 2014 at 6:22