I recently got a raspberry pi 4 B and want to install qt on it. Your steps are very clear and helpful but I come across an issue configuring. I am using wsl ubuntu 22.04.2 LTS on host machine. Raspbian Linux 11 bullseye on rpi4B with 32 bit OS image. Using
cross compilin
QPA backends:
DirectFB ............................... no
EGLFS .................................. yes
EGLFS details:
EGLFS OpenWFD ........................ no
EGLFS i.Mx6 .......................... no
EGLFS i.Mx6 Wayland .................. no
EGLFS RCAR ........................... no
EGLFS EGLDevice ...................... yes
EGLFS GBM ............................ yes
EGLFS VSP2 ........................... no
EGLFS Mali ........................... no
EGLFS Raspberry Pi ................... yes
EGLFS X11 ............................ yes
LinuxFB ................................ yes
VNC .................................... yes
XCB:
Using system-provided xcb-xinput ..... yes
Native painting (experimental) ....... no
GL integrations:
GLX Plugin ......................... no
EGL-X11 Plugin ..................... yes
I see that EGLFS Raspberry Pi gets set to yes which is different from yours. Building the next step results in errors such as
/rpi-qt/qt-everywhere-src-5.15.2/qtbase/src/plugins/platforms/eglfs/deviceintegration/eglfs_brcm/qeglfsbrcmintegration.cpp:74:5:
error: ‘EGL_DISPMANX_WINDOW_T’ was not declared in this scope
74 | EGL_DISPMANX_WINDOW_T *eglWindow = new EGL_DISPMANX_WINDOW_T;
| ^~~~~~~~~~~~~~~~~~~~~
Any help would be appreciated, ive been spinning my wheels on this one. Thanks again.
I recently got a raspberry pi 4 B and want to install qt on it. Your steps are very clear and helpful but I come across an issue configuring. I am using wsl ubuntu 22.04.2 LTS on host machine. Raspbian Linux 11 bullseye on rpi4B with 32 bit OS image. Using cross compilin
QPA backends: DirectFB ............................... no EGLFS .................................. yes EGLFS details: EGLFS OpenWFD ........................ no EGLFS i.Mx6 .......................... no EGLFS i.Mx6 Wayland .................. no EGLFS RCAR ........................... no EGLFS EGLDevice ...................... yes EGLFS GBM ............................ yes EGLFS VSP2 ........................... no EGLFS Mali ........................... no EGLFS Raspberry Pi ................... yes EGLFS X11 ............................ yes LinuxFB ................................ yes VNC .................................... yes XCB: Using system-provided xcb-xinput ..... yes Native painting (experimental) ....... no GL integrations: GLX Plugin ......................... no EGL-X11 Plugin ..................... yes
I see that EGLFS Raspberry Pi gets set to yes which is different from yours. Building the next step results in errors such as
Any help would be appreciated, ive been spinning my wheels on this one. Thanks again.