[go2_driver_node-4] INFO:scripts.webrtc_driver:Connection state is closed

[kkjing0414]

Hello dear author, I would like to ask what is the cause of [go2_driver_node-4] INFO:scripts.webrtc_driver:Connection state is closed? Hope to get your reply, thank you

[tfoldi]

what is your robot's firmware version? can you share the full debug log of go2_driver_node ? you can run that independently with ros2 run go2_robot_sdk go2_driver_node

[kkjing0414]

this log？

[kkjing0414]

I'm sorry, I don't know what to think about my version, I just re-installed it, there is a worse problem, at first it was the remote control dog walk, but the point cloud did not change, and there are these errors: [RVIZ2-5] [ERROR] [1728307688.446746262] [rviz2]: The link is static or has unrealistic inertia, so the equivalent inertia box will not be shown. [rviz2-5] [RVIZ2-5] [ERROR] [1728307688.447129319] [rviz2]: The link is static or has unrealistic inertia, so the equivalent inertia box will not be shown. [rviz2-5] [RVIZ2-5] [INFO] [1728307689.306326667] [rviz2]: Stereo is NOT SUPPORTED [controller_server-11] [WARN] [1728307694.725134500] [local_Costmap. local_costmap]: Can't update static costmap layer, no map received [planner_server-13] [WARN] [1728307696.176749087] [global_costmap.global_costmap]: Can't update static costmap layer, no map received. Then came the launch, which could only load half the dog's body, which was even worse.

[abizovnuralem]

@kkjing0414 Hello, what connection method are you using?

[kkjing0414]

@abizovnuralem webrtc